ceph-csi/vendor/google.golang.org/grpc/dialoptions.go

621 lines
21 KiB
Go
Raw Normal View History

2018-11-26 18:23:56 +00:00
/*
*
* Copyright 2018 gRPC authors.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
*/
package grpc
import (
"context"
2018-11-26 18:23:56 +00:00
"net"
"time"
"google.golang.org/grpc/backoff"
"google.golang.org/grpc/channelz"
2018-11-26 18:23:56 +00:00
"google.golang.org/grpc/credentials"
"google.golang.org/grpc/credentials/insecure"
2018-11-26 18:23:56 +00:00
"google.golang.org/grpc/internal"
internalbackoff "google.golang.org/grpc/internal/backoff"
"google.golang.org/grpc/internal/binarylog"
2018-11-26 18:23:56 +00:00
"google.golang.org/grpc/internal/transport"
"google.golang.org/grpc/keepalive"
"google.golang.org/grpc/resolver"
"google.golang.org/grpc/stats"
)
func init() {
internal.AddGlobalDialOptions = func(opt ...DialOption) {
extraDialOptions = append(extraDialOptions, opt...)
}
internal.ClearGlobalDialOptions = func() {
extraDialOptions = nil
}
internal.WithBinaryLogger = withBinaryLogger
}
2018-11-26 18:23:56 +00:00
// dialOptions configure a Dial call. dialOptions are set by the DialOption
// values passed to Dial.
type dialOptions struct {
unaryInt UnaryClientInterceptor
streamInt StreamClientInterceptor
chainUnaryInts []UnaryClientInterceptor
chainStreamInts []StreamClientInterceptor
cp Compressor
dc Decompressor
bs internalbackoff.Strategy
block bool
returnLastError bool
timeout time.Duration
scChan <-chan ServiceConfig
authority string
binaryLogger binarylog.Logger
copts transport.ConnectOptions
callOptions []CallOption
channelzParentID *channelz.Identifier
disableServiceConfig bool
disableRetry bool
disableHealthCheck bool
healthCheckFunc internal.HealthChecker
minConnectTimeout func() time.Duration
defaultServiceConfig *ServiceConfig // defaultServiceConfig is parsed from defaultServiceConfigRawJSON.
defaultServiceConfigRawJSON *string
resolvers []resolver.Builder
2018-11-26 18:23:56 +00:00
}
// DialOption configures how we set up the connection.
type DialOption interface {
apply(*dialOptions)
}
var extraDialOptions []DialOption
2018-11-26 18:23:56 +00:00
// EmptyDialOption does not alter the dial configuration. It can be embedded in
// another structure to build custom dial options.
//
// # Experimental
//
// Notice: This type is EXPERIMENTAL and may be changed or removed in a
// later release.
2018-11-26 18:23:56 +00:00
type EmptyDialOption struct{}
func (EmptyDialOption) apply(*dialOptions) {}
// funcDialOption wraps a function that modifies dialOptions into an
// implementation of the DialOption interface.
type funcDialOption struct {
f func(*dialOptions)
}
func (fdo *funcDialOption) apply(do *dialOptions) {
fdo.f(do)
}
func newFuncDialOption(f func(*dialOptions)) *funcDialOption {
return &funcDialOption{
f: f,
}
}
// WithWriteBufferSize determines how much data can be batched before doing a
// write on the wire. The corresponding memory allocation for this buffer will
// be twice the size to keep syscalls low. The default value for this buffer is
// 32KB.
//
// Zero will disable the write buffer such that each write will be on underlying
// connection. Note: A Send call may not directly translate to a write.
func WithWriteBufferSize(s int) DialOption {
return newFuncDialOption(func(o *dialOptions) {
o.copts.WriteBufferSize = s
})
}
// WithReadBufferSize lets you set the size of read buffer, this determines how
// much data can be read at most for each read syscall.
//
// The default value for this buffer is 32KB. Zero will disable read buffer for
// a connection so data framer can access the underlying conn directly.
func WithReadBufferSize(s int) DialOption {
return newFuncDialOption(func(o *dialOptions) {
o.copts.ReadBufferSize = s
})
}
// WithInitialWindowSize returns a DialOption which sets the value for initial
// window size on a stream. The lower bound for window size is 64K and any value
// smaller than that will be ignored.
func WithInitialWindowSize(s int32) DialOption {
return newFuncDialOption(func(o *dialOptions) {
o.copts.InitialWindowSize = s
})
}
// WithInitialConnWindowSize returns a DialOption which sets the value for
// initial window size on a connection. The lower bound for window size is 64K
// and any value smaller than that will be ignored.
func WithInitialConnWindowSize(s int32) DialOption {
return newFuncDialOption(func(o *dialOptions) {
o.copts.InitialConnWindowSize = s
})
}
// WithMaxMsgSize returns a DialOption which sets the maximum message size the
// client can receive.
//
// Deprecated: use WithDefaultCallOptions(MaxCallRecvMsgSize(s)) instead. Will
// be supported throughout 1.x.
2018-11-26 18:23:56 +00:00
func WithMaxMsgSize(s int) DialOption {
return WithDefaultCallOptions(MaxCallRecvMsgSize(s))
}
// WithDefaultCallOptions returns a DialOption which sets the default
// CallOptions for calls over the connection.
func WithDefaultCallOptions(cos ...CallOption) DialOption {
return newFuncDialOption(func(o *dialOptions) {
o.callOptions = append(o.callOptions, cos...)
})
}
// WithCodec returns a DialOption which sets a codec for message marshaling and
// unmarshaling.
//
// Deprecated: use WithDefaultCallOptions(ForceCodec(_)) instead. Will be
// supported throughout 1.x.
2018-11-26 18:23:56 +00:00
func WithCodec(c Codec) DialOption {
return WithDefaultCallOptions(CallCustomCodec(c))
}
// WithCompressor returns a DialOption which sets a Compressor to use for
// message compression. It has lower priority than the compressor set by the
// UseCompressor CallOption.
//
// Deprecated: use UseCompressor instead. Will be supported throughout 1.x.
2018-11-26 18:23:56 +00:00
func WithCompressor(cp Compressor) DialOption {
return newFuncDialOption(func(o *dialOptions) {
o.cp = cp
})
}
// WithDecompressor returns a DialOption which sets a Decompressor to use for
// incoming message decompression. If incoming response messages are encoded
// using the decompressor's Type(), it will be used. Otherwise, the message
// encoding will be used to look up the compressor registered via
// encoding.RegisterCompressor, which will then be used to decompress the
// message. If no compressor is registered for the encoding, an Unimplemented
// status error will be returned.
//
// Deprecated: use encoding.RegisterCompressor instead. Will be supported
// throughout 1.x.
2018-11-26 18:23:56 +00:00
func WithDecompressor(dc Decompressor) DialOption {
return newFuncDialOption(func(o *dialOptions) {
o.dc = dc
})
}
// WithServiceConfig returns a DialOption which has a channel to read the
// service configuration.
//
// Deprecated: service config should be received through name resolver or via
// WithDefaultServiceConfig, as specified at
// https://github.com/grpc/grpc/blob/master/doc/service_config.md. Will be
// removed in a future 1.x release.
2018-11-26 18:23:56 +00:00
func WithServiceConfig(c <-chan ServiceConfig) DialOption {
return newFuncDialOption(func(o *dialOptions) {
o.scChan = c
})
}
// WithConnectParams configures the ClientConn to use the provided ConnectParams
// for creating and maintaining connections to servers.
//
// The backoff configuration specified as part of the ConnectParams overrides
// all defaults specified in
// https://github.com/grpc/grpc/blob/master/doc/connection-backoff.md. Consider
// using the backoff.DefaultConfig as a base, in cases where you want to
// override only a subset of the backoff configuration.
func WithConnectParams(p ConnectParams) DialOption {
return newFuncDialOption(func(o *dialOptions) {
o.bs = internalbackoff.Exponential{Config: p.Backoff}
o.minConnectTimeout = func() time.Duration {
return p.MinConnectTimeout
}
})
}
2018-11-26 18:23:56 +00:00
// WithBackoffMaxDelay configures the dialer to use the provided maximum delay
// when backing off after failed connection attempts.
//
// Deprecated: use WithConnectParams instead. Will be supported throughout 1.x.
2018-11-26 18:23:56 +00:00
func WithBackoffMaxDelay(md time.Duration) DialOption {
return WithBackoffConfig(BackoffConfig{MaxDelay: md})
}
// WithBackoffConfig configures the dialer to use the provided backoff
// parameters after connection failures.
//
// Deprecated: use WithConnectParams instead. Will be supported throughout 1.x.
2018-11-26 18:23:56 +00:00
func WithBackoffConfig(b BackoffConfig) DialOption {
bc := backoff.DefaultConfig
bc.MaxDelay = b.MaxDelay
return withBackoff(internalbackoff.Exponential{Config: bc})
2018-11-26 18:23:56 +00:00
}
// withBackoff sets the backoff strategy used for connectRetryNum after a failed
// connection attempt.
//
// This can be exported if arbitrary backoff strategies are allowed by gRPC.
func withBackoff(bs internalbackoff.Strategy) DialOption {
2018-11-26 18:23:56 +00:00
return newFuncDialOption(func(o *dialOptions) {
o.bs = bs
})
}
// WithBlock returns a DialOption which makes callers of Dial block until the
2018-11-26 18:23:56 +00:00
// underlying connection is up. Without this, Dial returns immediately and
// connecting the server happens in background.
func WithBlock() DialOption {
return newFuncDialOption(func(o *dialOptions) {
o.block = true
})
}
// WithReturnConnectionError returns a DialOption which makes the client connection
// return a string containing both the last connection error that occurred and
// the context.DeadlineExceeded error.
// Implies WithBlock()
//
// # Experimental
//
// Notice: This API is EXPERIMENTAL and may be changed or removed in a
// later release.
func WithReturnConnectionError() DialOption {
return newFuncDialOption(func(o *dialOptions) {
o.block = true
o.returnLastError = true
})
}
2018-11-26 18:23:56 +00:00
// WithInsecure returns a DialOption which disables transport security for this
// ClientConn. Under the hood, it uses insecure.NewCredentials().
//
// Note that using this DialOption with per-RPC credentials (through
// WithCredentialsBundle or WithPerRPCCredentials) which require transport
// security is incompatible and will cause grpc.Dial() to fail.
//
// Deprecated: use WithTransportCredentials and insecure.NewCredentials()
// instead. Will be supported throughout 1.x.
2018-11-26 18:23:56 +00:00
func WithInsecure() DialOption {
return newFuncDialOption(func(o *dialOptions) {
o.copts.TransportCredentials = insecure.NewCredentials()
2018-11-26 18:23:56 +00:00
})
}
// WithNoProxy returns a DialOption which disables the use of proxies for this
// ClientConn. This is ignored if WithDialer or WithContextDialer are used.
//
// # Experimental
//
// Notice: This API is EXPERIMENTAL and may be changed or removed in a
// later release.
func WithNoProxy() DialOption {
return newFuncDialOption(func(o *dialOptions) {
o.copts.UseProxy = false
})
}
2018-11-26 18:23:56 +00:00
// WithTransportCredentials returns a DialOption which configures a connection
// level security credentials (e.g., TLS/SSL). This should not be used together
// with WithCredentialsBundle.
func WithTransportCredentials(creds credentials.TransportCredentials) DialOption {
return newFuncDialOption(func(o *dialOptions) {
o.copts.TransportCredentials = creds
})
}
// WithPerRPCCredentials returns a DialOption which sets credentials and places
// auth state on each outbound RPC.
func WithPerRPCCredentials(creds credentials.PerRPCCredentials) DialOption {
return newFuncDialOption(func(o *dialOptions) {
o.copts.PerRPCCredentials = append(o.copts.PerRPCCredentials, creds)
})
}
// WithCredentialsBundle returns a DialOption to set a credentials bundle for
// the ClientConn.WithCreds. This should not be used together with
// WithTransportCredentials.
//
// # Experimental
//
// Notice: This API is EXPERIMENTAL and may be changed or removed in a
// later release.
2018-11-26 18:23:56 +00:00
func WithCredentialsBundle(b credentials.Bundle) DialOption {
return newFuncDialOption(func(o *dialOptions) {
o.copts.CredsBundle = b
})
}
// WithTimeout returns a DialOption that configures a timeout for dialing a
// ClientConn initially. This is valid if and only if WithBlock() is present.
//
// Deprecated: use DialContext instead of Dial and context.WithTimeout
// instead. Will be supported throughout 1.x.
2018-11-26 18:23:56 +00:00
func WithTimeout(d time.Duration) DialOption {
return newFuncDialOption(func(o *dialOptions) {
o.timeout = d
})
}
// WithContextDialer returns a DialOption that sets a dialer to create
// connections. If FailOnNonTempDialError() is set to true, and an error is
// returned by f, gRPC checks the error's Temporary() method to decide if it
// should try to reconnect to the network address.
func WithContextDialer(f func(context.Context, string) (net.Conn, error)) DialOption {
2018-11-26 18:23:56 +00:00
return newFuncDialOption(func(o *dialOptions) {
o.copts.Dialer = f
})
}
func init() {
internal.WithHealthCheckFunc = withHealthCheckFunc
2018-11-26 18:23:56 +00:00
}
// WithDialer returns a DialOption that specifies a function to use for dialing
// network addresses. If FailOnNonTempDialError() is set to true, and an error
// is returned by f, gRPC checks the error's Temporary() method to decide if it
// should try to reconnect to the network address.
//
// Deprecated: use WithContextDialer instead. Will be supported throughout
// 1.x.
2018-11-26 18:23:56 +00:00
func WithDialer(f func(string, time.Duration) (net.Conn, error)) DialOption {
return WithContextDialer(
2018-11-26 18:23:56 +00:00
func(ctx context.Context, addr string) (net.Conn, error) {
if deadline, ok := ctx.Deadline(); ok {
return f(addr, time.Until(deadline))
2018-11-26 18:23:56 +00:00
}
return f(addr, 0)
})
}
// WithStatsHandler returns a DialOption that specifies the stats handler for
// all the RPCs and underlying network connections in this ClientConn.
func WithStatsHandler(h stats.Handler) DialOption {
return newFuncDialOption(func(o *dialOptions) {
if h == nil {
logger.Error("ignoring nil parameter in grpc.WithStatsHandler ClientOption")
// Do not allow a nil stats handler, which would otherwise cause
// panics.
return
}
o.copts.StatsHandlers = append(o.copts.StatsHandlers, h)
2018-11-26 18:23:56 +00:00
})
}
// withBinaryLogger returns a DialOption that specifies the binary logger for
// this ClientConn.
func withBinaryLogger(bl binarylog.Logger) DialOption {
return newFuncDialOption(func(o *dialOptions) {
o.binaryLogger = bl
})
}
2018-11-26 18:23:56 +00:00
// FailOnNonTempDialError returns a DialOption that specifies if gRPC fails on
// non-temporary dial errors. If f is true, and dialer returns a non-temporary
// error, gRPC will fail the connection to the network address and won't try to
// reconnect. The default value of FailOnNonTempDialError is false.
//
// FailOnNonTempDialError only affects the initial dial, and does not do
// anything useful unless you are also using WithBlock().
//
// # Experimental
//
// Notice: This API is EXPERIMENTAL and may be changed or removed in a
// later release.
2018-11-26 18:23:56 +00:00
func FailOnNonTempDialError(f bool) DialOption {
return newFuncDialOption(func(o *dialOptions) {
o.copts.FailOnNonTempDialError = f
})
}
// WithUserAgent returns a DialOption that specifies a user agent string for all
// the RPCs.
func WithUserAgent(s string) DialOption {
return newFuncDialOption(func(o *dialOptions) {
o.copts.UserAgent = s
})
}
// WithKeepaliveParams returns a DialOption that specifies keepalive parameters
// for the client transport.
func WithKeepaliveParams(kp keepalive.ClientParameters) DialOption {
if kp.Time < internal.KeepaliveMinPingTime {
logger.Warningf("Adjusting keepalive ping interval to minimum period of %v", internal.KeepaliveMinPingTime)
kp.Time = internal.KeepaliveMinPingTime
}
2018-11-26 18:23:56 +00:00
return newFuncDialOption(func(o *dialOptions) {
o.copts.KeepaliveParams = kp
})
}
// WithUnaryInterceptor returns a DialOption that specifies the interceptor for
// unary RPCs.
func WithUnaryInterceptor(f UnaryClientInterceptor) DialOption {
return newFuncDialOption(func(o *dialOptions) {
o.unaryInt = f
})
}
// WithChainUnaryInterceptor returns a DialOption that specifies the chained
// interceptor for unary RPCs. The first interceptor will be the outer most,
// while the last interceptor will be the inner most wrapper around the real call.
// All interceptors added by this method will be chained, and the interceptor
// defined by WithUnaryInterceptor will always be prepended to the chain.
func WithChainUnaryInterceptor(interceptors ...UnaryClientInterceptor) DialOption {
return newFuncDialOption(func(o *dialOptions) {
o.chainUnaryInts = append(o.chainUnaryInts, interceptors...)
})
}
2018-11-26 18:23:56 +00:00
// WithStreamInterceptor returns a DialOption that specifies the interceptor for
// streaming RPCs.
func WithStreamInterceptor(f StreamClientInterceptor) DialOption {
return newFuncDialOption(func(o *dialOptions) {
o.streamInt = f
})
}
// WithChainStreamInterceptor returns a DialOption that specifies the chained
// interceptor for streaming RPCs. The first interceptor will be the outer most,
// while the last interceptor will be the inner most wrapper around the real call.
// All interceptors added by this method will be chained, and the interceptor
// defined by WithStreamInterceptor will always be prepended to the chain.
func WithChainStreamInterceptor(interceptors ...StreamClientInterceptor) DialOption {
return newFuncDialOption(func(o *dialOptions) {
o.chainStreamInts = append(o.chainStreamInts, interceptors...)
})
}
2018-11-26 18:23:56 +00:00
// WithAuthority returns a DialOption that specifies the value to be used as the
// :authority pseudo-header and as the server name in authentication handshake.
2018-11-26 18:23:56 +00:00
func WithAuthority(a string) DialOption {
return newFuncDialOption(func(o *dialOptions) {
o.authority = a
})
}
// WithChannelzParentID returns a DialOption that specifies the channelz ID of
// current ClientConn's parent. This function is used in nested channel creation
// (e.g. grpclb dial).
//
// # Experimental
//
// Notice: This API is EXPERIMENTAL and may be changed or removed in a
// later release.
func WithChannelzParentID(id *channelz.Identifier) DialOption {
2018-11-26 18:23:56 +00:00
return newFuncDialOption(func(o *dialOptions) {
o.channelzParentID = id
})
}
// WithDisableServiceConfig returns a DialOption that causes gRPC to ignore any
2018-11-26 18:23:56 +00:00
// service config provided by the resolver and provides a hint to the resolver
// to not fetch service configs.
//
// Note that this dial option only disables service config from resolver. If
// default service config is provided, gRPC will use the default service config.
2018-11-26 18:23:56 +00:00
func WithDisableServiceConfig() DialOption {
return newFuncDialOption(func(o *dialOptions) {
o.disableServiceConfig = true
})
}
// WithDefaultServiceConfig returns a DialOption that configures the default
// service config, which will be used in cases where:
//
// 1. WithDisableServiceConfig is also used, or
//
// 2. The name resolver does not provide a service config or provides an
// invalid service config.
//
// The parameter s is the JSON representation of the default service config.
// For more information about service configs, see:
// https://github.com/grpc/grpc/blob/master/doc/service_config.md
// For a simple example of usage, see:
// examples/features/load_balancing/client/main.go
func WithDefaultServiceConfig(s string) DialOption {
return newFuncDialOption(func(o *dialOptions) {
o.defaultServiceConfigRawJSON = &s
})
}
2018-11-26 18:23:56 +00:00
// WithDisableRetry returns a DialOption that disables retries, even if the
// service config enables them. This does not impact transparent retries, which
// will happen automatically if no data is written to the wire or if the RPC is
// unprocessed by the remote server.
func WithDisableRetry() DialOption {
return newFuncDialOption(func(o *dialOptions) {
o.disableRetry = true
})
}
// WithMaxHeaderListSize returns a DialOption that specifies the maximum
// (uncompressed) size of header list that the client is prepared to accept.
func WithMaxHeaderListSize(s uint32) DialOption {
return newFuncDialOption(func(o *dialOptions) {
o.copts.MaxHeaderListSize = &s
})
}
// WithDisableHealthCheck disables the LB channel health checking for all
// SubConns of this ClientConn.
//
// # Experimental
//
// Notice: This API is EXPERIMENTAL and may be changed or removed in a
// later release.
func WithDisableHealthCheck() DialOption {
return newFuncDialOption(func(o *dialOptions) {
o.disableHealthCheck = true
})
}
// withHealthCheckFunc replaces the default health check function with the
// provided one. It makes tests easier to change the health check function.
//
// For testing purpose only.
func withHealthCheckFunc(f internal.HealthChecker) DialOption {
return newFuncDialOption(func(o *dialOptions) {
o.healthCheckFunc = f
})
}
2018-11-26 18:23:56 +00:00
func defaultDialOptions() dialOptions {
return dialOptions{
healthCheckFunc: internal.HealthCheckFunc,
2018-11-26 18:23:56 +00:00
copts: transport.ConnectOptions{
WriteBufferSize: defaultWriteBufSize,
ReadBufferSize: defaultReadBufSize,
UseProxy: true,
2018-11-26 18:23:56 +00:00
},
}
}
// withGetMinConnectDeadline specifies the function that clientconn uses to
// get minConnectDeadline. This can be used to make connection attempts happen
// faster/slower.
//
// For testing purpose only.
func withMinConnectDeadline(f func() time.Duration) DialOption {
return newFuncDialOption(func(o *dialOptions) {
o.minConnectTimeout = f
})
}
// WithResolvers allows a list of resolver implementations to be registered
// locally with the ClientConn without needing to be globally registered via
// resolver.Register. They will be matched against the scheme used for the
// current Dial only, and will take precedence over the global registry.
//
// # Experimental
//
// Notice: This API is EXPERIMENTAL and may be changed or removed in a
// later release.
func WithResolvers(rs ...resolver.Builder) DialOption {
return newFuncDialOption(func(o *dialOptions) {
o.resolvers = append(o.resolvers, rs...)
})
}