ceph-csi/vendor/k8s.io/kubernetes/cluster/log-dump/log-dump.sh

377 lines
15 KiB
Bash
Raw Normal View History

2018-07-18 14:47:22 +00:00
#!/usr/bin/env bash
2018-01-09 18:57:14 +00:00
# Copyright 2017 The Kubernetes Authors.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Call this to dump all master and node logs into the folder specified in $1
# (defaults to _artifacts). Only works if the provider supports SSH.
# TODO(shyamjvs): This script should be moved to test/e2e which is where it ideally belongs.
set -o errexit
set -o nounset
set -o pipefail
readonly report_dir="${1:-_artifacts}"
readonly gcs_artifacts_dir="${2:-}"
readonly logexporter_namespace="${3:-logexporter}"
# In order to more trivially extend log-dump for custom deployments,
# check for a function named log_dump_custom_get_instances. If it's
# defined, we assume the function can me called with one argument, the
# role, which is either "master" or "node".
echo "Checking for custom logdump instances, if any"
if [[ $(type -t log_dump_custom_get_instances) == "function" ]]; then
readonly use_custom_instance_list=yes
else
readonly use_custom_instance_list=
fi
readonly master_ssh_supported_providers="gce aws kubernetes-anywhere"
readonly node_ssh_supported_providers="gce gke aws kubernetes-anywhere"
readonly gcloud_supported_providers="gce gke kubernetes-anywhere"
readonly master_logfiles="kube-apiserver kube-apiserver-audit kube-scheduler rescheduler kube-controller-manager etcd etcd-events glbc cluster-autoscaler kube-addon-manager fluentd"
readonly node_logfiles="kube-proxy fluentd node-problem-detector"
readonly node_systemd_services="node-problem-detector"
readonly hollow_node_logfiles="kubelet-hollow-node-* kubeproxy-hollow-node-* npd-hollow-node-*"
readonly aws_logfiles="cloud-init-output"
readonly gce_logfiles="startupscript"
readonly kern_logfile="kern"
readonly initd_logfiles="docker"
readonly supervisord_logfiles="kubelet supervisor/supervisord supervisor/kubelet-stdout supervisor/kubelet-stderr supervisor/docker-stdout supervisor/docker-stderr"
2018-07-18 14:47:22 +00:00
readonly systemd_services="kubelet kubelet-monitor kube-container-runtime-monitor ${LOG_DUMP_SYSTEMD_SERVICES:-docker}"
2018-01-09 18:57:14 +00:00
# Limit the number of concurrent node connections so that we don't run out of
# file descriptors for large clusters.
readonly max_scp_processes=25
# TODO: Get rid of all the sourcing of bash dependencies eventually.
function setup() {
KUBE_ROOT=$(dirname "${BASH_SOURCE}")/../..
if [[ -z "${use_custom_instance_list}" ]]; then
: ${KUBE_CONFIG_FILE:="config-test.sh"}
echo "Sourcing kube-util.sh"
source "${KUBE_ROOT}/cluster/kube-util.sh"
echo "Detecting project"
detect-project 2>&1
elif [[ "${KUBERNETES_PROVIDER}" == "gke" ]]; then
echo "Using 'use_custom_instance_list' with gke, skipping check for LOG_DUMP_SSH_KEY and LOG_DUMP_SSH_USER"
# Source the below script for the ssh-to-node utility function.
# Hack to save and restore the value of the ZONE env as the script overwrites it.
local gke_zone="${ZONE:-}"
source "${KUBE_ROOT}/cluster/gce/util.sh"
ZONE="${gke_zone}"
elif [[ -z "${LOG_DUMP_SSH_KEY:-}" ]]; then
echo "LOG_DUMP_SSH_KEY not set, but required when using log_dump_custom_get_instances"
exit 1
elif [[ -z "${LOG_DUMP_SSH_USER:-}" ]]; then
echo "LOG_DUMP_SSH_USER not set, but required when using log_dump_custom_get_instances"
exit 1
fi
}
function log-dump-ssh() {
if [[ "${gcloud_supported_providers}" =~ "${KUBERNETES_PROVIDER}" ]]; then
ssh-to-node "$@"
return
fi
local host="$1"
local cmd="$2"
ssh -oLogLevel=quiet -oConnectTimeout=30 -oStrictHostKeyChecking=no -i "${LOG_DUMP_SSH_KEY}" "${LOG_DUMP_SSH_USER}@${host}" "${cmd}"
}
# Copy all files /var/log/{$3}.log on node $1 into local dir $2.
# $3 should be a space-separated string of files.
# This function shouldn't ever trigger errexit, but doesn't block stderr.
function copy-logs-from-node() {
local -r node="${1}"
local -r dir="${2}"
local files=( ${3} )
# Append ".log*"
# The * at the end is needed to also copy rotated logs (which happens
# in large clusters and long runs).
files=( "${files[@]/%/.log*}" )
# Prepend "/var/log/"
files=( "${files[@]/#/\/var\/log\/}" )
# Comma delimit (even the singleton, or scp does the wrong thing), surround by braces.
local -r scp_files="{$(printf "%s," "${files[@]}")}"
if [[ "${gcloud_supported_providers}" =~ "${KUBERNETES_PROVIDER}" ]]; then
# get-serial-port-output lets you ask for ports 1-4, but currently (11/21/2016) only port 1 contains useful information
gcloud compute instances get-serial-port-output --project "${PROJECT}" --zone "${ZONE}" --port 1 "${node}" > "${dir}/serial-1.log" || true
gcloud compute scp --recurse --project "${PROJECT}" --zone "${ZONE}" "${node}:${scp_files}" "${dir}" > /dev/null || true
elif [[ "${KUBERNETES_PROVIDER}" == "aws" ]]; then
local ip=$(get_ssh_hostname "${node}")
scp -oLogLevel=quiet -oConnectTimeout=30 -oStrictHostKeyChecking=no -i "${AWS_SSH_KEY}" "${SSH_USER}@${ip}:${scp_files}" "${dir}" > /dev/null || true
elif [[ -n "${use_custom_instance_list}" ]]; then
scp -oLogLevel=quiet -oConnectTimeout=30 -oStrictHostKeyChecking=no -i "${LOG_DUMP_SSH_KEY}" "${LOG_DUMP_SSH_USER}@${node}:${scp_files}" "${dir}" > /dev/null || true
else
echo "Unknown cloud-provider '${KUBERNETES_PROVIDER}' and use_custom_instance_list is unset too - skipping logdump for '${node}'"
fi
}
# Save logs for node $1 into directory $2. Pass in any non-common files in $3.
# Pass in any non-common systemd services in $4.
# $3 and $4 should be a space-separated list of files.
# Set $5 to true to indicate it is on master. Default to false.
# This function shouldn't ever trigger errexit
function save-logs() {
local -r node_name="${1}"
local -r dir="${2}"
local files="${3}"
local opt_systemd_services="${4:-""}"
local on_master="${5:-"false"}"
if [[ -n "${use_custom_instance_list}" ]]; then
if [[ -n "${LOG_DUMP_SAVE_LOGS:-}" ]]; then
files="${files} ${LOG_DUMP_SAVE_LOGS:-}"
fi
else
case "${KUBERNETES_PROVIDER}" in
gce|gke|kubernetes-anywhere)
files="${files} ${gce_logfiles}"
;;
aws)
files="${files} ${aws_logfiles}"
;;
esac
fi
local -r services=( ${systemd_services} ${opt_systemd_services} ${LOG_DUMP_SAVE_SERVICES:-} )
if log-dump-ssh "${node_name}" "command -v journalctl" &> /dev/null; then
if [[ "${on_master}" == "true" ]]; then
log-dump-ssh "${node_name}" "sudo journalctl --output=short-precise -u kube-master-installation.service" > "${dir}/kube-master-installation.log" || true
log-dump-ssh "${node_name}" "sudo journalctl --output=short-precise -u kube-master-configuration.service" > "${dir}/kube-master-configuration.log" || true
else
log-dump-ssh "${node_name}" "sudo journalctl --output=short-precise -u kube-node-installation.service" > "${dir}/kube-node-installation.log" || true
log-dump-ssh "${node_name}" "sudo journalctl --output=short-precise -u kube-node-configuration.service" > "${dir}/kube-node-configuration.log" || true
fi
log-dump-ssh "${node_name}" "sudo journalctl --output=short-precise -k" > "${dir}/kern.log" || true
for svc in "${services[@]}"; do
log-dump-ssh "${node_name}" "sudo journalctl --output=cat -u ${svc}.service" > "${dir}/${svc}.log" || true
done
else
files="${kern_logfile} ${files} ${initd_logfiles} ${supervisord_logfiles}"
fi
echo "Changing logfiles to be world-readable for download"
log-dump-ssh "${node_name}" "sudo chmod -R a+r /var/log" || true
echo "Copying '${files}' from ${node_name}"
copy-logs-from-node "${node_name}" "${dir}" "${files}"
}
function dump_masters() {
local master_names
if [[ -n "${use_custom_instance_list}" ]]; then
master_names=( $(log_dump_custom_get_instances master) )
elif [[ ! "${master_ssh_supported_providers}" =~ "${KUBERNETES_PROVIDER}" ]]; then
echo "Master SSH not supported for ${KUBERNETES_PROVIDER}"
return
elif [[ -n "${KUBEMARK_MASTER_NAME:-}" ]]; then
master_names=( "${KUBEMARK_MASTER_NAME}" )
else
if ! (detect-master); then
echo "Master not detected. Is the cluster up?"
return
fi
master_names=( "${MASTER_NAME}" )
fi
if [[ "${#master_names[@]}" == 0 ]]; then
echo "No masters found?"
return
fi
proc=${max_scp_processes}
for master_name in "${master_names[@]}"; do
master_dir="${report_dir}/${master_name}"
mkdir -p "${master_dir}"
save-logs "${master_name}" "${master_dir}" "${master_logfiles}" "" "true" &
# We don't want to run more than ${max_scp_processes} at a time, so
# wait once we hit that many nodes. This isn't ideal, since one might
# take much longer than the others, but it should help.
proc=$((proc - 1))
if [[ proc -eq 0 ]]; then
proc=${max_scp_processes}
wait
fi
done
# Wait for any remaining processes.
if [[ proc -gt 0 && proc -lt ${max_scp_processes} ]]; then
wait
fi
}
function dump_nodes() {
local node_names=()
if [[ -n "${1:-}" ]]; then
echo "Dumping logs for nodes provided as args to dump_nodes() function"
node_names=( "$@" )
elif [[ -n "${use_custom_instance_list}" ]]; then
echo "Dumping logs for nodes provided by log_dump_custom_get_instances() function"
node_names=( $(log_dump_custom_get_instances node) )
elif [[ ! "${node_ssh_supported_providers}" =~ "${KUBERNETES_PROVIDER}" ]]; then
echo "Node SSH not supported for ${KUBERNETES_PROVIDER}"
return
else
echo "Detecting nodes in the cluster"
detect-node-names &> /dev/null
if [[ -n "${NODE_NAMES:-}" ]]; then
node_names=( "${NODE_NAMES[@]}" )
fi
fi
if [[ "${#node_names[@]}" == 0 ]]; then
echo "No nodes found!"
return
fi
node_logfiles_all="${node_logfiles}"
if [[ "${ENABLE_HOLLOW_NODE_LOGS:-}" == "true" ]]; then
node_logfiles_all="${node_logfiles_all} ${hollow_node_logfiles}"
fi
nodes_selected_for_logs=()
if [[ -n "${LOGDUMP_ONLY_N_RANDOM_NODES:-}" ]]; then
# We randomly choose 'LOGDUMP_ONLY_N_RANDOM_NODES' many nodes for fetching logs.
for index in `shuf -i 0-$(( ${#node_names[*]} - 1 )) -n ${LOGDUMP_ONLY_N_RANDOM_NODES}`
do
nodes_selected_for_logs+=("${node_names[$index]}")
done
else
nodes_selected_for_logs=( "${node_names[@]}" )
fi
proc=${max_scp_processes}
for node_name in "${nodes_selected_for_logs[@]}"; do
node_dir="${report_dir}/${node_name}"
mkdir -p "${node_dir}"
# Save logs in the background. This speeds up things when there are
# many nodes.
save-logs "${node_name}" "${node_dir}" "${node_logfiles_all}" "${node_systemd_services}" &
# We don't want to run more than ${max_scp_processes} at a time, so
# wait once we hit that many nodes. This isn't ideal, since one might
# take much longer than the others, but it should help.
proc=$((proc - 1))
if [[ proc -eq 0 ]]; then
proc=${max_scp_processes}
wait
fi
done
# Wait for any remaining processes.
if [[ proc -gt 0 && proc -lt ${max_scp_processes} ]]; then
wait
fi
}
function dump_nodes_with_logexporter() {
echo "Detecting nodes in the cluster"
detect-node-names &> /dev/null
if [[ -z "${NODE_NAMES:-}" ]]; then
echo "No nodes found!"
return
fi
# Obtain parameters required by logexporter.
local -r service_account_credentials="$(cat ${GOOGLE_APPLICATION_CREDENTIALS} | base64 | tr -d '\n')"
local -r cloud_provider="${KUBERNETES_PROVIDER}"
local -r enable_hollow_node_logs="${ENABLE_HOLLOW_NODE_LOGS:-false}"
2018-07-18 14:47:22 +00:00
local -r logexport_sleep_seconds="$(( 90 + NUM_NODES / 3 ))"
2018-01-09 18:57:14 +00:00
# Fill in the parameters in the logexporter daemonset template.
sed -i'' -e "s@{{.LogexporterNamespace}}@${logexporter_namespace}@g" "${KUBE_ROOT}/cluster/log-dump/logexporter-daemonset.yaml"
sed -i'' -e "s@{{.ServiceAccountCredentials}}@${service_account_credentials}@g" "${KUBE_ROOT}/cluster/log-dump/logexporter-daemonset.yaml"
sed -i'' -e "s@{{.CloudProvider}}@${cloud_provider}@g" "${KUBE_ROOT}/cluster/log-dump/logexporter-daemonset.yaml"
sed -i'' -e "s@{{.GCSPath}}@${gcs_artifacts_dir}@g" "${KUBE_ROOT}/cluster/log-dump/logexporter-daemonset.yaml"
sed -i'' -e "s@{{.EnableHollowNodeLogs}}@${enable_hollow_node_logs}@g" "${KUBE_ROOT}/cluster/log-dump/logexporter-daemonset.yaml"
# Create the logexporter namespace, service-account secret and the logexporter daemonset within that namespace.
KUBECTL="${KUBE_ROOT}/cluster/kubectl.sh"
if ! "${KUBECTL}" create -f "${KUBE_ROOT}/cluster/log-dump/logexporter-daemonset.yaml"; then
echo "Failed to create logexporter daemonset.. falling back to logdump through SSH"
"${KUBECTL}" delete namespace "${logexporter_namespace}" || true
dump_nodes "${NODE_NAMES[@]}"
return
fi
# Give some time for the pods to finish uploading logs.
sleep "${logexport_sleep_seconds}"
# List registry of marker files (of nodes whose logexporter succeeded) from GCS.
local nodes_succeeded
for retry in {1..10}; do
if nodes_succeeded=$(gsutil ls ${gcs_artifacts_dir}/logexported-nodes-registry); then
echo "Successfully listed marker files for successful nodes"
break
else
echo "Attempt ${retry} failed to list marker files for succeessful nodes"
if [[ "${retry}" == 10 ]]; then
echo "Final attempt to list marker files failed.. falling back to logdump through SSH"
"${KUBECTL}" delete namespace "${logexporter_namespace}" || true
dump_nodes "${NODE_NAMES[@]}"
return
fi
sleep 2
fi
done
# Collect names of nodes which didn't run logexporter successfully.
# Note: This step is O(#nodes^2) as we check if each node is present in the list of succeeded nodes.
# Making it linear would add code complexity without much benefit (as it just takes ~1s for 5k nodes).
failed_nodes=()
for node in "${NODE_NAMES[@]}"; do
if [[ ! "${nodes_succeeded}" =~ "${node}" ]]; then
echo "Logexporter didn't succeed on node ${node}. Queuing it for logdump through SSH."
failed_nodes+=("${node}")
fi
done
# Delete the logexporter resources and dump logs for the failed nodes (if any) through SSH.
2018-07-18 14:47:22 +00:00
"${KUBECTL}" get pods --namespace "${logexporter_namespace}" || true
2018-01-09 18:57:14 +00:00
"${KUBECTL}" delete namespace "${logexporter_namespace}" || true
if [[ "${#failed_nodes[@]}" != 0 ]]; then
echo -e "Dumping logs through SSH for the following nodes:\n${failed_nodes[@]}"
dump_nodes "${failed_nodes[@]}"
fi
}
function main() {
setup
# Copy master logs to artifacts dir locally (through SSH).
echo "Dumping logs from master locally to '${report_dir}'"
dump_masters
if [[ "${DUMP_ONLY_MASTER_LOGS:-}" == "true" ]]; then
echo "Skipping dumping of node logs"
return
fi
# Copy logs from nodes to GCS directly or to artifacts dir locally (through SSH).
if [[ -n "${gcs_artifacts_dir}" ]]; then
echo "Dumping logs from nodes to GCS directly at '${gcs_artifacts_dir}' using logexporter"
dump_nodes_with_logexporter
else
echo "Dumping logs from nodes locally to '${report_dir}'"
dump_nodes
fi
}
main