1
0
mirror of https://github.com/ceph/ceph-csi.git synced 2024-12-23 05:20:19 +00:00
ceph-csi/vendor/google.golang.org/grpc/codes/codes.go

251 lines
9.2 KiB
Go
Raw Normal View History

2018-01-09 18:57:14 +00:00
/*
*
* Copyright 2014 gRPC authors.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
*/
// Package codes defines the canonical error codes used by gRPC. It is
// consistent across various languages.
package codes // import "google.golang.org/grpc/codes"
2018-03-06 22:33:18 +00:00
2018-01-09 18:57:14 +00:00
import (
"fmt"
2018-07-18 14:47:22 +00:00
"strconv"
2018-01-09 18:57:14 +00:00
)
// A Code is a status code defined according to the [gRPC documentation].
//
// Only the codes defined as consts in this package are valid codes. Do not use
// other code values. Behavior of other codes is implementation-specific and
// interoperability between implementations is not guaranteed.
//
// [gRPC documentation]: https://github.com/grpc/grpc/blob/master/doc/statuscodes.md
2018-01-09 18:57:14 +00:00
type Code uint32
const (
// OK is returned on success.
OK Code = 0
// Canceled indicates the operation was canceled (typically by the caller).
//
// The gRPC framework will generate this error code when cancellation
// is requested.
2018-01-09 18:57:14 +00:00
Canceled Code = 1
2018-03-06 22:33:18 +00:00
// Unknown error. An example of where this error may be returned is
2018-01-09 18:57:14 +00:00
// if a Status value received from another address space belongs to
2018-03-06 22:33:18 +00:00
// an error-space that is not known in this address space. Also
2018-01-09 18:57:14 +00:00
// errors raised by APIs that do not return enough error information
// may be converted to this error.
//
// The gRPC framework will generate this error code in the above two
// mentioned cases.
2018-01-09 18:57:14 +00:00
Unknown Code = 2
// InvalidArgument indicates client specified an invalid argument.
// Note that this differs from FailedPrecondition. It indicates arguments
// that are problematic regardless of the state of the system
// (e.g., a malformed file name).
//
// This error code will not be generated by the gRPC framework.
2018-01-09 18:57:14 +00:00
InvalidArgument Code = 3
// DeadlineExceeded means operation expired before completion.
// For operations that change the state of the system, this error may be
// returned even if the operation has completed successfully. For
// example, a successful response from a server could have been delayed
// long enough for the deadline to expire.
//
// The gRPC framework will generate this error code when the deadline is
// exceeded.
2018-01-09 18:57:14 +00:00
DeadlineExceeded Code = 4
// NotFound means some requested entity (e.g., file or directory) was
// not found.
//
// This error code will not be generated by the gRPC framework.
2018-01-09 18:57:14 +00:00
NotFound Code = 5
// AlreadyExists means an attempt to create an entity failed because one
// already exists.
//
// This error code will not be generated by the gRPC framework.
2018-01-09 18:57:14 +00:00
AlreadyExists Code = 6
// PermissionDenied indicates the caller does not have permission to
// execute the specified operation. It must not be used for rejections
// caused by exhausting some resource (use ResourceExhausted
2018-03-06 22:33:18 +00:00
// instead for those errors). It must not be
2018-01-09 18:57:14 +00:00
// used if the caller cannot be identified (use Unauthenticated
// instead for those errors).
//
// This error code will not be generated by the gRPC core framework,
// but expect authentication middleware to use it.
2018-01-09 18:57:14 +00:00
PermissionDenied Code = 7
// ResourceExhausted indicates some resource has been exhausted, perhaps
// a per-user quota, or perhaps the entire file system is out of space.
//
// This error code will be generated by the gRPC framework in
// out-of-memory and server overload situations, or when a message is
// larger than the configured maximum size.
2018-01-09 18:57:14 +00:00
ResourceExhausted Code = 8
// FailedPrecondition indicates operation was rejected because the
// system is not in a state required for the operation's execution.
// For example, directory to be deleted may be non-empty, an rmdir
// operation is applied to a non-directory, etc.
//
// A litmus test that may help a service implementor in deciding
// between FailedPrecondition, Aborted, and Unavailable:
// (a) Use Unavailable if the client can retry just the failing call.
// (b) Use Aborted if the client should retry at a higher-level
// (e.g., restarting a read-modify-write sequence).
// (c) Use FailedPrecondition if the client should not retry until
2018-03-06 22:33:18 +00:00
// the system state has been explicitly fixed. E.g., if an "rmdir"
2018-01-09 18:57:14 +00:00
// fails because the directory is non-empty, FailedPrecondition
// should be returned since the client should not retry unless
// they have first fixed up the directory by deleting files from it.
// (d) Use FailedPrecondition if the client performs conditional
// REST Get/Update/Delete on a resource and the resource on the
// server does not match the condition. E.g., conflicting
// read-modify-write on the same resource.
//
// This error code will not be generated by the gRPC framework.
2018-01-09 18:57:14 +00:00
FailedPrecondition Code = 9
// Aborted indicates the operation was aborted, typically due to a
// concurrency issue like sequencer check failures, transaction aborts,
// etc.
//
// See litmus test above for deciding between FailedPrecondition,
// Aborted, and Unavailable.
//
// This error code will not be generated by the gRPC framework.
2018-01-09 18:57:14 +00:00
Aborted Code = 10
// OutOfRange means operation was attempted past the valid range.
// E.g., seeking or reading past end of file.
//
// Unlike InvalidArgument, this error indicates a problem that may
// be fixed if the system state changes. For example, a 32-bit file
// system will generate InvalidArgument if asked to read at an
// offset that is not in the range [0,2^32-1], but it will generate
// OutOfRange if asked to read from an offset past the current
// file size.
//
// There is a fair bit of overlap between FailedPrecondition and
2018-03-06 22:33:18 +00:00
// OutOfRange. We recommend using OutOfRange (the more specific
2018-01-09 18:57:14 +00:00
// error) when it applies so that callers who are iterating through
// a space can easily look for an OutOfRange error to detect when
// they are done.
//
// This error code will not be generated by the gRPC framework.
2018-01-09 18:57:14 +00:00
OutOfRange Code = 11
// Unimplemented indicates operation is not implemented or not
// supported/enabled in this service.
//
// This error code will be generated by the gRPC framework. Most
// commonly, you will see this error code when a method implementation
// is missing on the server. It can also be generated for unknown
// compression algorithms or a disagreement as to whether an RPC should
// be streaming.
2018-01-09 18:57:14 +00:00
Unimplemented Code = 12
2018-03-06 22:33:18 +00:00
// Internal errors. Means some invariants expected by underlying
// system has been broken. If you see one of these errors,
2018-01-09 18:57:14 +00:00
// something is very broken.
//
// This error code will be generated by the gRPC framework in several
// internal error conditions.
2018-01-09 18:57:14 +00:00
Internal Code = 13
// Unavailable indicates the service is currently unavailable.
// This is a most likely a transient condition and may be corrected
// by retrying with a backoff. Note that it is not always safe to retry
// non-idempotent operations.
2018-01-09 18:57:14 +00:00
//
// See litmus test above for deciding between FailedPrecondition,
// Aborted, and Unavailable.
//
// This error code will be generated by the gRPC framework during
// abrupt shutdown of a server process or network connection.
2018-01-09 18:57:14 +00:00
Unavailable Code = 14
// DataLoss indicates unrecoverable data loss or corruption.
//
// This error code will not be generated by the gRPC framework.
2018-01-09 18:57:14 +00:00
DataLoss Code = 15
2018-03-06 22:33:18 +00:00
// Unauthenticated indicates the request does not have valid
// authentication credentials for the operation.
//
// The gRPC framework will generate this error code when the
// authentication metadata is invalid or a Credentials callback fails,
// but also expect authentication middleware to generate it.
2018-03-06 22:33:18 +00:00
Unauthenticated Code = 16
2018-07-18 14:47:22 +00:00
_maxCode = 17
2018-01-09 18:57:14 +00:00
)
var strToCode = map[string]Code{
`"OK"`: OK,
`"CANCELLED"`:/* [sic] */ Canceled,
`"UNKNOWN"`: Unknown,
`"INVALID_ARGUMENT"`: InvalidArgument,
`"DEADLINE_EXCEEDED"`: DeadlineExceeded,
`"NOT_FOUND"`: NotFound,
`"ALREADY_EXISTS"`: AlreadyExists,
`"PERMISSION_DENIED"`: PermissionDenied,
`"RESOURCE_EXHAUSTED"`: ResourceExhausted,
`"FAILED_PRECONDITION"`: FailedPrecondition,
`"ABORTED"`: Aborted,
`"OUT_OF_RANGE"`: OutOfRange,
`"UNIMPLEMENTED"`: Unimplemented,
`"INTERNAL"`: Internal,
`"UNAVAILABLE"`: Unavailable,
`"DATA_LOSS"`: DataLoss,
`"UNAUTHENTICATED"`: Unauthenticated,
}
// UnmarshalJSON unmarshals b into the Code.
func (c *Code) UnmarshalJSON(b []byte) error {
// From json.Unmarshaler: By convention, to approximate the behavior of
// Unmarshal itself, Unmarshalers implement UnmarshalJSON([]byte("null")) as
// a no-op.
if string(b) == "null" {
return nil
}
if c == nil {
return fmt.Errorf("nil receiver passed to UnmarshalJSON")
}
2018-07-18 14:47:22 +00:00
if ci, err := strconv.ParseUint(string(b), 10, 32); err == nil {
if ci >= _maxCode {
return fmt.Errorf("invalid code: %d", ci)
2018-07-18 14:47:22 +00:00
}
*c = Code(ci)
return nil
}
2018-01-09 18:57:14 +00:00
if jc, ok := strToCode[string(b)]; ok {
*c = jc
return nil
}
return fmt.Errorf("invalid code: %q", string(b))
}