ceph-csi/internal/rbd/snapshot.go

136 lines
3.3 KiB
Go
Raw Normal View History

rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
/*
Copyright 2020 The Ceph-CSI Authors.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
package rbd
import (
"context"
"errors"
"fmt"
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
"github.com/ceph/ceph-csi/internal/util"
"github.com/ceph/ceph-csi/internal/util/log"
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
)
func createRBDClone(
ctx context.Context,
parentVol, cloneRbdVol *rbdVolume,
snap *rbdSnapshot,
) error {
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
// create snapshot
err := parentVol.createSnapshot(ctx, snap)
if err != nil {
log.ErrorLog(ctx, "failed to create snapshot %s: %v", snap, err)
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
return err
}
rbd: Add support for smart cloning Added support for RBD PVC to PVC cloning, below commands are executed to create a PVC-PVC clone from RBD side. * Check the depth(n) of the cloned image if n>=(hard limit -2) or ((soft limit-2) Add a task to flatten the image and return about (to avoid image leak) **Note** will try to flatten the temp clone image in the chain if available * Reserve the key and values in omap (this will help us to avoid the leak as it's not reserved earlier as we have returned ABORT (the request may not come back)) * Create a snapshot of rbd image * Clone the snapshot (temp clone) * Delete the snapshot * Snapshot the temp clone * Clone the snapshot (final clone) * Delete the snapshot ```bash 1) check the image depth of the parent image if flatten required add a task to flatten image and return ABORT to avoid leak (hardlimit-2 and softlimit-2 check will be done) 2) Reserve omap keys 2) rbd snap create <RBD image for src k8s volume>@<random snap name> 3) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 4) rbd snap rm <RBD image for src k8s volume>@<random snap name> 5) rbd snap create <cloned RBD image created in snapshot process>@<random snap name> 6) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 7)rbd snap rm <RBD image for src k8s volume>@<random snap name> ``` * Delete temporary clone image created as part of clone(delete if present) * Delete rbd image Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-07-07 12:14:19 +00:00
snap.RbdImageName = parentVol.RbdImageName
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
// create clone image and delete snapshot
err = cloneRbdVol.cloneRbdImageFromSnapshot(ctx, snap, parentVol)
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
if err != nil {
log.ErrorLog(
ctx,
"failed to clone rbd image %s from snapshot %s: %v",
cloneRbdVol.RbdImageName,
snap.RbdSnapName,
err)
err = fmt.Errorf(
"failed to clone rbd image %s from snapshot %s: %w",
cloneRbdVol.RbdImageName,
snap.RbdSnapName,
err)
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
}
errSnap := parentVol.deleteSnapshot(ctx, snap)
if errSnap != nil {
log.ErrorLog(ctx, "failed to delete snapshot: %v", errSnap)
delErr := cloneRbdVol.deleteImage(ctx)
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
if delErr != nil {
log.ErrorLog(ctx, "failed to delete rbd image: %s with error: %v", cloneRbdVol, delErr)
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
}
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
return err
}
return nil
}
// cleanUpSnapshot removes the RBD-snapshot (rbdSnap) from the RBD-image
// (parentVol) and deletes the RBD-image rbdVol.
func cleanUpSnapshot(
ctx context.Context,
parentVol *rbdVolume,
rbdSnap *rbdSnapshot,
rbdVol *rbdVolume,
) error {
err := parentVol.deleteSnapshot(ctx, rbdSnap)
if err != nil {
if !errors.Is(err, ErrSnapNotFound) {
log.ErrorLog(ctx, "failed to delete snapshot %q: %v", rbdSnap, err)
return err
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
}
}
if rbdVol != nil {
err := rbdVol.deleteImage(ctx)
if err != nil {
if !errors.Is(err, ErrImageNotFound) {
log.ErrorLog(ctx, "failed to delete rbd image %q with error: %v", rbdVol, err)
return err
}
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
}
}
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
return nil
}
func generateVolFromSnap(rbdSnap *rbdSnapshot) *rbdVolume {
vol := new(rbdVolume)
vol.ClusterID = rbdSnap.ClusterID
vol.VolID = rbdSnap.VolID
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
vol.Monitors = rbdSnap.Monitors
vol.Pool = rbdSnap.Pool
vol.JournalPool = rbdSnap.JournalPool
vol.RadosNamespace = rbdSnap.RadosNamespace
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
vol.RbdImageName = rbdSnap.RbdSnapName
vol.ImageID = rbdSnap.ImageID
// copyEncryptionConfig cannot be used here because the volume and the
// snapshot will have the same volumeID which cases the panic in
// copyEncryptionConfig function.
vol.blockEncryption = rbdSnap.blockEncryption
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
return vol
}
func undoSnapshotCloning(
ctx context.Context,
parentVol *rbdVolume,
rbdSnap *rbdSnapshot,
cloneVol *rbdVolume,
cr *util.Credentials,
) error {
err := cleanUpSnapshot(ctx, parentVol, rbdSnap, cloneVol)
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
if err != nil {
log.ErrorLog(ctx, "failed to clean up %s or %s: %v", cloneVol, rbdSnap, err)
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
return err
}
err = undoSnapReservation(ctx, rbdSnap, cr)
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
return err
}