ceph-csi/internal/rbd/controllerserver.go

1399 lines
45 KiB
Go
Raw Normal View History

2018-01-09 18:59:50 +00:00
/*
Copyright 2018 The Ceph-CSI Authors.
2018-01-09 18:59:50 +00:00
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
package rbd
import (
"context"
"errors"
2018-01-09 18:59:50 +00:00
csicommon "github.com/ceph/ceph-csi/internal/csi-common"
"github.com/ceph/ceph-csi/internal/util"
"github.com/ceph/ceph-csi/internal/util/log"
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
librbd "github.com/ceph/go-ceph/rbd"
"github.com/container-storage-interface/spec/lib/go/csi"
"github.com/kubernetes-csi/csi-lib-utils/protosanitizer"
2018-03-06 22:33:57 +00:00
"google.golang.org/grpc/codes"
"google.golang.org/grpc/status"
2018-01-09 18:59:50 +00:00
)
const (
oneGB = 1073741824
)
// ControllerServer struct of rbd CSI driver with supported methods of CSI
// controller server spec.
type ControllerServer struct {
2018-01-09 18:59:50 +00:00
*csicommon.DefaultControllerServer
// A map storing all volumes with ongoing operations so that additional operations
// for that same volume (as defined by VolumeID/volume name) return an Aborted error
VolumeLocks *util.VolumeLocks
// A map storing all volumes with ongoing operations so that additional operations
// for that same snapshot (as defined by SnapshotID/snapshot name) return an Aborted error
SnapshotLocks *util.VolumeLocks
// A map storing all volumes/snapshots with ongoing operations.
OperationLocks *util.OperationLock
2018-01-09 18:59:50 +00:00
}
func (cs *ControllerServer) validateVolumeReq(ctx context.Context, req *csi.CreateVolumeRequest) error {
if err := cs.Driver.ValidateControllerServiceRequest(
csi.ControllerServiceCapability_RPC_CREATE_DELETE_VOLUME); err != nil {
log.ErrorLog(ctx, "invalid create volume req: %v", protosanitizer.StripSecrets(req))
return err
2018-01-09 18:59:50 +00:00
}
2018-03-06 22:33:57 +00:00
// Check sanity of request Name, Volume Capabilities
if req.Name == "" {
return status.Error(codes.InvalidArgument, "volume Name cannot be empty")
2018-03-06 22:33:57 +00:00
}
if req.VolumeCapabilities == nil {
return status.Error(codes.InvalidArgument, "volume Capabilities cannot be empty")
2018-03-06 22:33:57 +00:00
}
options := req.GetParameters()
if value, ok := options["clusterID"]; !ok || value == "" {
return status.Error(codes.InvalidArgument, "missing or empty cluster ID to provision volume from")
}
if value, ok := options["pool"]; !ok || value == "" {
return status.Error(codes.InvalidArgument, "missing or empty pool name to provision volume from")
}
if value, ok := options["dataPool"]; ok && value == "" {
return status.Error(codes.InvalidArgument, "empty datapool name to provision volume from")
}
if value, ok := options["radosNamespace"]; ok && value == "" {
return status.Error(codes.InvalidArgument, "empty namespace name to provision volume from")
}
if value, ok := options["volumeNamePrefix"]; ok && value == "" {
return status.Error(codes.InvalidArgument, "empty volume name prefix to provision volume from")
}
// Allow readonly access mode for volume with content source
err := util.CheckReadOnlyManyIsSupported(req)
if err != nil {
return err
}
return nil
}
// parseVolCreateRequest take create volume `request` argument and make use of the
// request arguments for subsequent calls.
func (cs *ControllerServer) parseVolCreateRequest(
ctx context.Context,
req *csi.CreateVolumeRequest) (*rbdVolume, error) {
// TODO (sbezverk) Last check for not exceeding total storage capacity
// below capability check indicates that we support both {SINGLE_NODE or MULTI_NODE} WRITERs and the `isMultiWriter`
// flag has been set accordingly.
isMultiWriter, isBlock := csicommon.IsBlockMultiWriter(req.VolumeCapabilities)
// below return value has set, if it is RWO mode File PVC.
isRWOFile := csicommon.IsFileRWO(req.VolumeCapabilities)
// below return value has set, if it is ReadOnly capability.
isROOnly := csicommon.IsReaderOnly(req.VolumeCapabilities)
// We want to fail early if the user is trying to create a RWX on a non-block type device
if !isRWOFile && !isBlock && !isROOnly {
return nil, status.Error(
codes.InvalidArgument,
"multi node access modes are only supported on rbd `block` type volumes")
}
if imageFeatures, ok := req.GetParameters()["imageFeatures"]; checkImageFeatures(imageFeatures, ok, true) {
return nil, status.Error(codes.InvalidArgument, "missing required parameter imageFeatures")
}
// if it's NOT SINGLE_NODE_WRITER, and it's BLOCK we'll set the parameter to ignore the in-use checks
rbdVol, err := genVolFromVolumeOptions(
ctx,
req.GetParameters(),
req.GetSecrets(),
isMultiWriter && isBlock,
false)
if err != nil {
return nil, status.Error(codes.InvalidArgument, err.Error())
}
rbdVol.RequestName = req.GetName()
// Volume Size - Default is 1 GiB
volSizeBytes := int64(oneGB)
if req.GetCapacityRange() != nil {
volSizeBytes = req.GetCapacityRange().GetRequiredBytes()
}
// always round up the request size in bytes to the nearest MiB/GiB
rbdVol.VolSize = util.RoundOffBytes(volSizeBytes)
// RequestedVolSize has the size of the volume requested by the user.
rbdVol.RequestedVolSize = rbdVol.VolSize
// start with pool the same as journal pool, in case there is a topology
// based split, pool for the image will be updated subsequently
rbdVol.JournalPool = rbdVol.Pool
// store topology information from the request
rbdVol.TopologyPools, rbdVol.TopologyRequirement, err = util.GetTopologyFromRequest(req)
if err != nil {
return nil, status.Error(codes.InvalidArgument, err.Error())
}
// NOTE: rbdVol does not contain VolID and RbdImageName populated, everything
// else is populated post create request parsing
return rbdVol, nil
}
func buildCreateVolumeResponse(req *csi.CreateVolumeRequest, rbdVol *rbdVolume) *csi.CreateVolumeResponse {
volumeContext := req.GetParameters()
volumeContext["pool"] = rbdVol.Pool
volumeContext["journalPool"] = rbdVol.JournalPool
volumeContext["imageName"] = rbdVol.RbdImageName
if rbdVol.RadosNamespace != "" {
volumeContext["radosNamespace"] = rbdVol.RadosNamespace
}
if rbdVol.DataPool != "" {
volumeContext["dataPool"] = rbdVol.DataPool
}
volume := &csi.Volume{
VolumeId: rbdVol.VolID,
CapacityBytes: rbdVol.VolSize,
VolumeContext: volumeContext,
ContentSource: req.GetVolumeContentSource(),
}
if rbdVol.Topology != nil {
volume.AccessibleTopology =
[]*csi.Topology{
{
Segments: rbdVol.Topology,
},
}
}
return &csi.CreateVolumeResponse{Volume: volume}
}
rbd: Add support for smart cloning Added support for RBD PVC to PVC cloning, below commands are executed to create a PVC-PVC clone from RBD side. * Check the depth(n) of the cloned image if n>=(hard limit -2) or ((soft limit-2) Add a task to flatten the image and return about (to avoid image leak) **Note** will try to flatten the temp clone image in the chain if available * Reserve the key and values in omap (this will help us to avoid the leak as it's not reserved earlier as we have returned ABORT (the request may not come back)) * Create a snapshot of rbd image * Clone the snapshot (temp clone) * Delete the snapshot * Snapshot the temp clone * Clone the snapshot (final clone) * Delete the snapshot ```bash 1) check the image depth of the parent image if flatten required add a task to flatten image and return ABORT to avoid leak (hardlimit-2 and softlimit-2 check will be done) 2) Reserve omap keys 2) rbd snap create <RBD image for src k8s volume>@<random snap name> 3) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 4) rbd snap rm <RBD image for src k8s volume>@<random snap name> 5) rbd snap create <cloned RBD image created in snapshot process>@<random snap name> 6) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 7)rbd snap rm <RBD image for src k8s volume>@<random snap name> ``` * Delete temporary clone image created as part of clone(delete if present) * Delete rbd image Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-07-07 12:14:19 +00:00
// getGRPCErrorForCreateVolume converts the returns the GRPC errors based on
// the input error types it expected to use only for CreateVolume as we need to
// return different GRPC codes for different functions based on the input.
func getGRPCErrorForCreateVolume(err error) error {
if errors.Is(err, ErrVolNameConflict) {
rbd: Add support for smart cloning Added support for RBD PVC to PVC cloning, below commands are executed to create a PVC-PVC clone from RBD side. * Check the depth(n) of the cloned image if n>=(hard limit -2) or ((soft limit-2) Add a task to flatten the image and return about (to avoid image leak) **Note** will try to flatten the temp clone image in the chain if available * Reserve the key and values in omap (this will help us to avoid the leak as it's not reserved earlier as we have returned ABORT (the request may not come back)) * Create a snapshot of rbd image * Clone the snapshot (temp clone) * Delete the snapshot * Snapshot the temp clone * Clone the snapshot (final clone) * Delete the snapshot ```bash 1) check the image depth of the parent image if flatten required add a task to flatten image and return ABORT to avoid leak (hardlimit-2 and softlimit-2 check will be done) 2) Reserve omap keys 2) rbd snap create <RBD image for src k8s volume>@<random snap name> 3) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 4) rbd snap rm <RBD image for src k8s volume>@<random snap name> 5) rbd snap create <cloned RBD image created in snapshot process>@<random snap name> 6) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 7)rbd snap rm <RBD image for src k8s volume>@<random snap name> ``` * Delete temporary clone image created as part of clone(delete if present) * Delete rbd image Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-07-07 12:14:19 +00:00
return status.Error(codes.AlreadyExists, err.Error())
}
if errors.Is(err, ErrFlattenInProgress) {
rbd: Add support for smart cloning Added support for RBD PVC to PVC cloning, below commands are executed to create a PVC-PVC clone from RBD side. * Check the depth(n) of the cloned image if n>=(hard limit -2) or ((soft limit-2) Add a task to flatten the image and return about (to avoid image leak) **Note** will try to flatten the temp clone image in the chain if available * Reserve the key and values in omap (this will help us to avoid the leak as it's not reserved earlier as we have returned ABORT (the request may not come back)) * Create a snapshot of rbd image * Clone the snapshot (temp clone) * Delete the snapshot * Snapshot the temp clone * Clone the snapshot (final clone) * Delete the snapshot ```bash 1) check the image depth of the parent image if flatten required add a task to flatten image and return ABORT to avoid leak (hardlimit-2 and softlimit-2 check will be done) 2) Reserve omap keys 2) rbd snap create <RBD image for src k8s volume>@<random snap name> 3) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 4) rbd snap rm <RBD image for src k8s volume>@<random snap name> 5) rbd snap create <cloned RBD image created in snapshot process>@<random snap name> 6) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 7)rbd snap rm <RBD image for src k8s volume>@<random snap name> ``` * Delete temporary clone image created as part of clone(delete if present) * Delete rbd image Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-07-07 12:14:19 +00:00
return status.Error(codes.Aborted, err.Error())
}
rbd: Add support for smart cloning Added support for RBD PVC to PVC cloning, below commands are executed to create a PVC-PVC clone from RBD side. * Check the depth(n) of the cloned image if n>=(hard limit -2) or ((soft limit-2) Add a task to flatten the image and return about (to avoid image leak) **Note** will try to flatten the temp clone image in the chain if available * Reserve the key and values in omap (this will help us to avoid the leak as it's not reserved earlier as we have returned ABORT (the request may not come back)) * Create a snapshot of rbd image * Clone the snapshot (temp clone) * Delete the snapshot * Snapshot the temp clone * Clone the snapshot (final clone) * Delete the snapshot ```bash 1) check the image depth of the parent image if flatten required add a task to flatten image and return ABORT to avoid leak (hardlimit-2 and softlimit-2 check will be done) 2) Reserve omap keys 2) rbd snap create <RBD image for src k8s volume>@<random snap name> 3) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 4) rbd snap rm <RBD image for src k8s volume>@<random snap name> 5) rbd snap create <cloned RBD image created in snapshot process>@<random snap name> 6) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 7)rbd snap rm <RBD image for src k8s volume>@<random snap name> ``` * Delete temporary clone image created as part of clone(delete if present) * Delete rbd image Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-07-07 12:14:19 +00:00
return status.Error(codes.Internal, err.Error())
}
func checkValidCreateVolumeRequest(rbdVol, parentVol *rbdVolume, rbdSnap *rbdSnapshot) error {
var err error
switch {
case rbdSnap != nil:
err = rbdSnap.isCompatibleEncryption(&rbdVol.rbdImage)
if err != nil {
return status.Errorf(codes.InvalidArgument, "cannot restore from snapshot %s: %s", rbdSnap, err.Error())
}
err = rbdSnap.isCompabitableClone(&rbdVol.rbdImage)
if err != nil {
return status.Errorf(codes.InvalidArgument, "cannot restore from snapshot %s: %s", rbdSnap, err.Error())
}
case parentVol != nil:
err = parentVol.isCompatibleEncryption(&rbdVol.rbdImage)
if err != nil {
return status.Errorf(codes.InvalidArgument, "cannot clone from volume %s: %s", parentVol, err.Error())
}
err = parentVol.isCompabitableClone(&rbdVol.rbdImage)
if err != nil {
return status.Errorf(codes.InvalidArgument, "cannot clone from volume %s: %s", parentVol, err.Error())
}
}
return nil
}
// CreateVolume creates the volume in backend.
func (cs *ControllerServer) CreateVolume(
ctx context.Context,
req *csi.CreateVolumeRequest) (*csi.CreateVolumeResponse, error) {
err := cs.validateVolumeReq(ctx, req)
if err != nil {
return nil, err
}
// TODO: create/get a connection from the the ConnPool, and do not pass
// the credentials to any of the utility functions.
cr, err := util.NewUserCredentialsWithMigration(req.GetSecrets())
if err != nil {
return nil, status.Error(codes.InvalidArgument, err.Error())
}
defer cr.DeleteCredentials()
rbdVol, err := cs.parseVolCreateRequest(ctx, req)
if err != nil {
return nil, err
}
defer rbdVol.Destroy()
// Existence and conflict checks
if acquired := cs.VolumeLocks.TryAcquire(req.GetName()); !acquired {
log.ErrorLog(ctx, util.VolumeOperationAlreadyExistsFmt, req.GetName())
return nil, status.Errorf(codes.Aborted, util.VolumeOperationAlreadyExistsFmt, req.GetName())
}
defer cs.VolumeLocks.Release(req.GetName())
err = rbdVol.Connect(cr)
if err != nil {
log.ErrorLog(ctx, "failed to connect to volume %v: %v", rbdVol.RbdImageName, err)
return nil, status.Error(codes.Internal, err.Error())
}
rbd: Add support for smart cloning Added support for RBD PVC to PVC cloning, below commands are executed to create a PVC-PVC clone from RBD side. * Check the depth(n) of the cloned image if n>=(hard limit -2) or ((soft limit-2) Add a task to flatten the image and return about (to avoid image leak) **Note** will try to flatten the temp clone image in the chain if available * Reserve the key and values in omap (this will help us to avoid the leak as it's not reserved earlier as we have returned ABORT (the request may not come back)) * Create a snapshot of rbd image * Clone the snapshot (temp clone) * Delete the snapshot * Snapshot the temp clone * Clone the snapshot (final clone) * Delete the snapshot ```bash 1) check the image depth of the parent image if flatten required add a task to flatten image and return ABORT to avoid leak (hardlimit-2 and softlimit-2 check will be done) 2) Reserve omap keys 2) rbd snap create <RBD image for src k8s volume>@<random snap name> 3) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 4) rbd snap rm <RBD image for src k8s volume>@<random snap name> 5) rbd snap create <cloned RBD image created in snapshot process>@<random snap name> 6) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 7)rbd snap rm <RBD image for src k8s volume>@<random snap name> ``` * Delete temporary clone image created as part of clone(delete if present) * Delete rbd image Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-07-07 12:14:19 +00:00
parentVol, rbdSnap, err := checkContentSource(ctx, req, cr)
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
if err != nil {
return nil, err
}
rbd: Add support for smart cloning Added support for RBD PVC to PVC cloning, below commands are executed to create a PVC-PVC clone from RBD side. * Check the depth(n) of the cloned image if n>=(hard limit -2) or ((soft limit-2) Add a task to flatten the image and return about (to avoid image leak) **Note** will try to flatten the temp clone image in the chain if available * Reserve the key and values in omap (this will help us to avoid the leak as it's not reserved earlier as we have returned ABORT (the request may not come back)) * Create a snapshot of rbd image * Clone the snapshot (temp clone) * Delete the snapshot * Snapshot the temp clone * Clone the snapshot (final clone) * Delete the snapshot ```bash 1) check the image depth of the parent image if flatten required add a task to flatten image and return ABORT to avoid leak (hardlimit-2 and softlimit-2 check will be done) 2) Reserve omap keys 2) rbd snap create <RBD image for src k8s volume>@<random snap name> 3) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 4) rbd snap rm <RBD image for src k8s volume>@<random snap name> 5) rbd snap create <cloned RBD image created in snapshot process>@<random snap name> 6) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 7)rbd snap rm <RBD image for src k8s volume>@<random snap name> ``` * Delete temporary clone image created as part of clone(delete if present) * Delete rbd image Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-07-07 12:14:19 +00:00
found, err := rbdVol.Exists(ctx, parentVol)
if err != nil {
rbd: Add support for smart cloning Added support for RBD PVC to PVC cloning, below commands are executed to create a PVC-PVC clone from RBD side. * Check the depth(n) of the cloned image if n>=(hard limit -2) or ((soft limit-2) Add a task to flatten the image and return about (to avoid image leak) **Note** will try to flatten the temp clone image in the chain if available * Reserve the key and values in omap (this will help us to avoid the leak as it's not reserved earlier as we have returned ABORT (the request may not come back)) * Create a snapshot of rbd image * Clone the snapshot (temp clone) * Delete the snapshot * Snapshot the temp clone * Clone the snapshot (final clone) * Delete the snapshot ```bash 1) check the image depth of the parent image if flatten required add a task to flatten image and return ABORT to avoid leak (hardlimit-2 and softlimit-2 check will be done) 2) Reserve omap keys 2) rbd snap create <RBD image for src k8s volume>@<random snap name> 3) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 4) rbd snap rm <RBD image for src k8s volume>@<random snap name> 5) rbd snap create <cloned RBD image created in snapshot process>@<random snap name> 6) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 7)rbd snap rm <RBD image for src k8s volume>@<random snap name> ``` * Delete temporary clone image created as part of clone(delete if present) * Delete rbd image Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-07-07 12:14:19 +00:00
return nil, getGRPCErrorForCreateVolume(err)
} else if found {
return cs.repairExistingVolume(ctx, req, cr, rbdVol, rbdSnap)
2018-03-06 22:33:57 +00:00
}
err = checkValidCreateVolumeRequest(rbdVol, parentVol, rbdSnap)
if err != nil {
return nil, err
}
err = flattenParentImage(ctx, parentVol, cr)
if err != nil {
return nil, err
rbd: Add support for smart cloning Added support for RBD PVC to PVC cloning, below commands are executed to create a PVC-PVC clone from RBD side. * Check the depth(n) of the cloned image if n>=(hard limit -2) or ((soft limit-2) Add a task to flatten the image and return about (to avoid image leak) **Note** will try to flatten the temp clone image in the chain if available * Reserve the key and values in omap (this will help us to avoid the leak as it's not reserved earlier as we have returned ABORT (the request may not come back)) * Create a snapshot of rbd image * Clone the snapshot (temp clone) * Delete the snapshot * Snapshot the temp clone * Clone the snapshot (final clone) * Delete the snapshot ```bash 1) check the image depth of the parent image if flatten required add a task to flatten image and return ABORT to avoid leak (hardlimit-2 and softlimit-2 check will be done) 2) Reserve omap keys 2) rbd snap create <RBD image for src k8s volume>@<random snap name> 3) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 4) rbd snap rm <RBD image for src k8s volume>@<random snap name> 5) rbd snap create <cloned RBD image created in snapshot process>@<random snap name> 6) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 7)rbd snap rm <RBD image for src k8s volume>@<random snap name> ``` * Delete temporary clone image created as part of clone(delete if present) * Delete rbd image Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-07-07 12:14:19 +00:00
}
err = reserveVol(ctx, rbdVol, rbdSnap, cr)
if err != nil {
return nil, status.Error(codes.Internal, err.Error())
}
defer func() {
if err != nil {
if !errors.Is(err, ErrFlattenInProgress) {
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
errDefer := undoVolReservation(ctx, rbdVol, cr)
if errDefer != nil {
log.WarningLog(ctx, "failed undoing reservation of volume: %s (%s)", req.GetName(), errDefer)
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
}
}
}
}()
err = cs.createBackingImage(ctx, cr, req.GetSecrets(), rbdVol, parentVol, rbdSnap)
if err != nil {
if errors.Is(err, ErrFlattenInProgress) {
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
return nil, status.Error(codes.Aborted, err.Error())
}
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
return nil, err
}
return buildCreateVolumeResponse(req, rbdVol), nil
2018-01-09 18:59:50 +00:00
}
func flattenParentImage(ctx context.Context, rbdVol *rbdVolume, cr *util.Credentials) error {
if rbdVol != nil {
// flatten the image or its parent before the reservation to avoid
// stale entries in post creation if we return ABORT error and the
// delete volume is not called
err := rbdVol.flattenCloneImage(ctx)
if err != nil {
return getGRPCErrorForCreateVolume(err)
}
// flatten cloned images if the snapshot count on the parent image
// exceeds maxSnapshotsOnImage
err = flattenTemporaryClonedImages(ctx, rbdVol, cr)
if err != nil {
return err
}
}
return nil
}
// repairExistingVolume checks the existing volume or snapshot and makes sure
// that the state is corrected to what was requested. It is needed to call this
// when the process of creating a volume was interrupted.
func (cs *ControllerServer) repairExistingVolume(ctx context.Context, req *csi.CreateVolumeRequest,
cr *util.Credentials, rbdVol *rbdVolume, rbdSnap *rbdSnapshot) (*csi.CreateVolumeResponse, error) {
vcs := req.GetVolumeContentSource()
switch {
// rbdVol is a restore from snapshot, rbdSnap is passed
case vcs.GetSnapshot() != nil:
// restore from snapshot implies rbdSnap != nil
// check if image depth is reached limit and requires flatten
err := checkFlatten(ctx, rbdVol, cr)
if err != nil {
return nil, err
}
err = rbdSnap.repairEncryptionConfig(&rbdVol.rbdImage)
if err != nil {
return nil, err
}
// expand the image if the requested size is greater than the current size
err = rbdVol.expand()
if err != nil {
log.ErrorLog(ctx, "failed to resize volume %s: %v", rbdVol, err)
return nil, err
}
// rbdVol is a clone from parentVol
case vcs.GetVolume() != nil:
// expand the image if the requested size is greater than the current size
err := rbdVol.expand()
if err != nil {
log.ErrorLog(ctx, "failed to resize volume %s: %v", rbdVol, err)
return nil, err
}
}
return buildCreateVolumeResponse(req, rbdVol), nil
}
// check snapshots on the rbd image, as we have limit from krbd that an image
// cannot have more than 510 snapshot at a given point of time. If the
// snapshots are more than the `maxSnapshotsOnImage` Add a task to flatten all
// the temporary cloned images and return ABORT error message. If the snapshots
// are more than the `minSnapshotOnImage` Add a task to flatten all the
// temporary cloned images.
func flattenTemporaryClonedImages(ctx context.Context, rbdVol *rbdVolume, cr *util.Credentials) error {
snaps, err := rbdVol.listSnapshots()
if err != nil {
if errors.Is(err, ErrImageNotFound) {
return status.Error(codes.InvalidArgument, err.Error())
}
return status.Error(codes.Internal, err.Error())
}
if len(snaps) > int(maxSnapshotsOnImage) {
log.DebugLog(
ctx,
"snapshots count %d on image: %s reached configured hard limit %d",
len(snaps),
rbdVol,
maxSnapshotsOnImage)
err = flattenClonedRbdImages(
ctx,
snaps,
rbdVol.Pool,
rbdVol.Monitors,
rbdVol.RbdImageName,
cr)
if err != nil {
return status.Error(codes.Internal, err.Error())
}
return status.Errorf(codes.ResourceExhausted, "rbd image %s has %d snapshots", rbdVol, len(snaps))
}
if len(snaps) > int(minSnapshotsOnImageToStartFlatten) {
log.DebugLog(
ctx,
"snapshots count %d on image: %s reached configured soft limit %d",
len(snaps),
rbdVol,
minSnapshotsOnImageToStartFlatten)
// If we start flattening all the snapshots at one shot the volume
// creation time will be affected,so we will flatten only the extra
// snapshots.
snaps = snaps[minSnapshotsOnImageToStartFlatten-1:]
err = flattenClonedRbdImages(
ctx,
snaps,
rbdVol.Pool,
rbdVol.Monitors,
rbdVol.RbdImageName,
cr)
if err != nil {
return status.Error(codes.Internal, err.Error())
}
}
return nil
}
// checkFlatten ensures that the image chain depth is not reached
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
// hardlimit or softlimit. if the softlimit is reached it adds a task and
// return success,the hardlimit is reached it starts a task to flatten the
// image and return Aborted.
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
func checkFlatten(ctx context.Context, rbdVol *rbdVolume, cr *util.Credentials) error {
err := rbdVol.flattenRbdImage(ctx, false, rbdHardMaxCloneDepth, rbdSoftMaxCloneDepth)
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
if err != nil {
if errors.Is(err, ErrFlattenInProgress) {
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
return status.Error(codes.Aborted, err.Error())
}
if errDefer := rbdVol.deleteImage(ctx); errDefer != nil {
log.ErrorLog(ctx, "failed to delete rbd image: %s with error: %v", rbdVol, errDefer)
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
return status.Error(codes.Internal, err.Error())
}
errDefer := undoVolReservation(ctx, rbdVol, cr)
if errDefer != nil {
log.WarningLog(ctx, "failed undoing reservation of volume: %s (%s)", rbdVol.RequestName, errDefer)
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
}
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
return status.Error(codes.Internal, err.Error())
}
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
return nil
}
func (cs *ControllerServer) createVolumeFromSnapshot(
ctx context.Context,
cr *util.Credentials,
secrets map[string]string,
rbdVol *rbdVolume,
snapshotID string) error {
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
rbdSnap := &rbdSnapshot{}
if acquired := cs.SnapshotLocks.TryAcquire(snapshotID); !acquired {
log.ErrorLog(ctx, util.SnapshotOperationAlreadyExistsFmt, snapshotID)
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
return status.Errorf(codes.Aborted, util.VolumeOperationAlreadyExistsFmt, snapshotID)
}
defer cs.SnapshotLocks.Release(snapshotID)
err := genSnapFromSnapID(ctx, rbdSnap, snapshotID, cr, secrets)
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
if err != nil {
if errors.Is(err, util.ErrPoolNotFound) {
log.ErrorLog(ctx, "failed to get backend snapshot for %s: %v", snapshotID, err)
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
return status.Error(codes.InvalidArgument, err.Error())
}
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
return status.Error(codes.Internal, err.Error())
}
// update parent name(rbd image name in snapshot)
rbdSnap.RbdImageName = rbdSnap.RbdSnapName
parentVol := generateVolFromSnap(rbdSnap)
// as we are operating on single cluster reuse the connection
parentVol.conn = rbdVol.conn.Copy()
// create clone image and delete snapshot
err = rbdVol.cloneRbdImageFromSnapshot(ctx, rbdSnap, parentVol)
if err != nil {
log.ErrorLog(ctx, "failed to clone rbd image %s from snapshot %s: %v", rbdVol, rbdSnap, err)
return err
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
}
log.DebugLog(ctx, "create volume %s from snapshot %s", rbdVol, rbdSnap)
// resize the volume if the size is different
// expand the image if the requested size is greater than the current size
err = rbdVol.expand()
if err != nil {
log.ErrorLog(ctx, "failed to resize volume %s: %v", rbdVol, err)
return err
}
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
return nil
}
func (cs *ControllerServer) createBackingImage(
ctx context.Context,
cr *util.Credentials,
secrets map[string]string,
rbdVol, parentVol *rbdVolume,
rbdSnap *rbdSnapshot) error {
var err error
j, err := volJournal.Connect(rbdVol.Monitors, rbdVol.RadosNamespace, cr)
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
if err != nil {
return status.Error(codes.Internal, err.Error())
}
defer j.Destroy()
switch {
case rbdSnap != nil:
if err = cs.OperationLocks.GetRestoreLock(rbdSnap.VolID); err != nil {
log.ErrorLog(ctx, err.Error())
return status.Error(codes.Aborted, err.Error())
}
defer cs.OperationLocks.ReleaseRestoreLock(rbdSnap.VolID)
err = cs.createVolumeFromSnapshot(ctx, cr, secrets, rbdVol, rbdSnap.VolID)
if err != nil {
return err
}
case parentVol != nil:
if err = cs.OperationLocks.GetCloneLock(parentVol.VolID); err != nil {
log.ErrorLog(ctx, err.Error())
return status.Error(codes.Aborted, err.Error())
rbd: Add support for smart cloning Added support for RBD PVC to PVC cloning, below commands are executed to create a PVC-PVC clone from RBD side. * Check the depth(n) of the cloned image if n>=(hard limit -2) or ((soft limit-2) Add a task to flatten the image and return about (to avoid image leak) **Note** will try to flatten the temp clone image in the chain if available * Reserve the key and values in omap (this will help us to avoid the leak as it's not reserved earlier as we have returned ABORT (the request may not come back)) * Create a snapshot of rbd image * Clone the snapshot (temp clone) * Delete the snapshot * Snapshot the temp clone * Clone the snapshot (final clone) * Delete the snapshot ```bash 1) check the image depth of the parent image if flatten required add a task to flatten image and return ABORT to avoid leak (hardlimit-2 and softlimit-2 check will be done) 2) Reserve omap keys 2) rbd snap create <RBD image for src k8s volume>@<random snap name> 3) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 4) rbd snap rm <RBD image for src k8s volume>@<random snap name> 5) rbd snap create <cloned RBD image created in snapshot process>@<random snap name> 6) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 7)rbd snap rm <RBD image for src k8s volume>@<random snap name> ``` * Delete temporary clone image created as part of clone(delete if present) * Delete rbd image Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-07-07 12:14:19 +00:00
}
defer cs.OperationLocks.ReleaseCloneLock(parentVol.VolID)
rbd: Add support for smart cloning Added support for RBD PVC to PVC cloning, below commands are executed to create a PVC-PVC clone from RBD side. * Check the depth(n) of the cloned image if n>=(hard limit -2) or ((soft limit-2) Add a task to flatten the image and return about (to avoid image leak) **Note** will try to flatten the temp clone image in the chain if available * Reserve the key and values in omap (this will help us to avoid the leak as it's not reserved earlier as we have returned ABORT (the request may not come back)) * Create a snapshot of rbd image * Clone the snapshot (temp clone) * Delete the snapshot * Snapshot the temp clone * Clone the snapshot (final clone) * Delete the snapshot ```bash 1) check the image depth of the parent image if flatten required add a task to flatten image and return ABORT to avoid leak (hardlimit-2 and softlimit-2 check will be done) 2) Reserve omap keys 2) rbd snap create <RBD image for src k8s volume>@<random snap name> 3) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 4) rbd snap rm <RBD image for src k8s volume>@<random snap name> 5) rbd snap create <cloned RBD image created in snapshot process>@<random snap name> 6) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 7)rbd snap rm <RBD image for src k8s volume>@<random snap name> ``` * Delete temporary clone image created as part of clone(delete if present) * Delete rbd image Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-07-07 12:14:19 +00:00
return rbdVol.createCloneFromImage(ctx, parentVol)
default:
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
err = createImage(ctx, rbdVol, cr)
if err != nil {
log.ErrorLog(ctx, "failed to create volume: %v", err)
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
return status.Error(codes.Internal, err.Error())
}
}
log.DebugLog(ctx, "created image %s backed for request name %s", rbdVol, rbdVol.RequestName)
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
defer func() {
if err != nil {
if !errors.Is(err, ErrFlattenInProgress) {
if deleteErr := rbdVol.deleteImage(ctx); deleteErr != nil {
log.ErrorLog(ctx, "failed to delete rbd image: %s with error: %v", rbdVol, deleteErr)
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
}
}
}
}()
err = rbdVol.storeImageID(ctx, j)
if err != nil {
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
return status.Error(codes.Internal, err.Error())
}
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
if rbdSnap != nil {
err = rbdVol.flattenRbdImage(ctx, false, rbdHardMaxCloneDepth, rbdSoftMaxCloneDepth)
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
if err != nil {
log.ErrorLog(ctx, "failed to flatten image %s: %v", rbdVol, err)
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
return err
}
}
return nil
}
func checkContentSource(
ctx context.Context,
req *csi.CreateVolumeRequest,
cr *util.Credentials) (*rbdVolume, *rbdSnapshot, error) {
if req.VolumeContentSource == nil {
rbd: Add support for smart cloning Added support for RBD PVC to PVC cloning, below commands are executed to create a PVC-PVC clone from RBD side. * Check the depth(n) of the cloned image if n>=(hard limit -2) or ((soft limit-2) Add a task to flatten the image and return about (to avoid image leak) **Note** will try to flatten the temp clone image in the chain if available * Reserve the key and values in omap (this will help us to avoid the leak as it's not reserved earlier as we have returned ABORT (the request may not come back)) * Create a snapshot of rbd image * Clone the snapshot (temp clone) * Delete the snapshot * Snapshot the temp clone * Clone the snapshot (final clone) * Delete the snapshot ```bash 1) check the image depth of the parent image if flatten required add a task to flatten image and return ABORT to avoid leak (hardlimit-2 and softlimit-2 check will be done) 2) Reserve omap keys 2) rbd snap create <RBD image for src k8s volume>@<random snap name> 3) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 4) rbd snap rm <RBD image for src k8s volume>@<random snap name> 5) rbd snap create <cloned RBD image created in snapshot process>@<random snap name> 6) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 7)rbd snap rm <RBD image for src k8s volume>@<random snap name> ``` * Delete temporary clone image created as part of clone(delete if present) * Delete rbd image Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-07-07 12:14:19 +00:00
return nil, nil, nil
}
rbd: Add support for smart cloning Added support for RBD PVC to PVC cloning, below commands are executed to create a PVC-PVC clone from RBD side. * Check the depth(n) of the cloned image if n>=(hard limit -2) or ((soft limit-2) Add a task to flatten the image and return about (to avoid image leak) **Note** will try to flatten the temp clone image in the chain if available * Reserve the key and values in omap (this will help us to avoid the leak as it's not reserved earlier as we have returned ABORT (the request may not come back)) * Create a snapshot of rbd image * Clone the snapshot (temp clone) * Delete the snapshot * Snapshot the temp clone * Clone the snapshot (final clone) * Delete the snapshot ```bash 1) check the image depth of the parent image if flatten required add a task to flatten image and return ABORT to avoid leak (hardlimit-2 and softlimit-2 check will be done) 2) Reserve omap keys 2) rbd snap create <RBD image for src k8s volume>@<random snap name> 3) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 4) rbd snap rm <RBD image for src k8s volume>@<random snap name> 5) rbd snap create <cloned RBD image created in snapshot process>@<random snap name> 6) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 7)rbd snap rm <RBD image for src k8s volume>@<random snap name> ``` * Delete temporary clone image created as part of clone(delete if present) * Delete rbd image Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-07-07 12:14:19 +00:00
volumeSource := req.VolumeContentSource
switch volumeSource.Type.(type) {
case *csi.VolumeContentSource_Snapshot:
snapshot := req.VolumeContentSource.GetSnapshot()
if snapshot == nil {
return nil, nil, status.Error(codes.NotFound, "volume Snapshot cannot be empty")
}
rbd: Add support for smart cloning Added support for RBD PVC to PVC cloning, below commands are executed to create a PVC-PVC clone from RBD side. * Check the depth(n) of the cloned image if n>=(hard limit -2) or ((soft limit-2) Add a task to flatten the image and return about (to avoid image leak) **Note** will try to flatten the temp clone image in the chain if available * Reserve the key and values in omap (this will help us to avoid the leak as it's not reserved earlier as we have returned ABORT (the request may not come back)) * Create a snapshot of rbd image * Clone the snapshot (temp clone) * Delete the snapshot * Snapshot the temp clone * Clone the snapshot (final clone) * Delete the snapshot ```bash 1) check the image depth of the parent image if flatten required add a task to flatten image and return ABORT to avoid leak (hardlimit-2 and softlimit-2 check will be done) 2) Reserve omap keys 2) rbd snap create <RBD image for src k8s volume>@<random snap name> 3) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 4) rbd snap rm <RBD image for src k8s volume>@<random snap name> 5) rbd snap create <cloned RBD image created in snapshot process>@<random snap name> 6) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 7)rbd snap rm <RBD image for src k8s volume>@<random snap name> ``` * Delete temporary clone image created as part of clone(delete if present) * Delete rbd image Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-07-07 12:14:19 +00:00
snapshotID := snapshot.GetSnapshotId()
if snapshotID == "" {
return nil, nil, status.Errorf(codes.NotFound, "volume Snapshot ID cannot be empty")
}
rbdSnap := &rbdSnapshot{}
if err := genSnapFromSnapID(ctx, rbdSnap, snapshotID, cr, req.GetSecrets()); err != nil {
log.ErrorLog(ctx, "failed to get backend snapshot for %s: %v", snapshotID, err)
if !errors.Is(err, ErrSnapNotFound) {
rbd: Add support for smart cloning Added support for RBD PVC to PVC cloning, below commands are executed to create a PVC-PVC clone from RBD side. * Check the depth(n) of the cloned image if n>=(hard limit -2) or ((soft limit-2) Add a task to flatten the image and return about (to avoid image leak) **Note** will try to flatten the temp clone image in the chain if available * Reserve the key and values in omap (this will help us to avoid the leak as it's not reserved earlier as we have returned ABORT (the request may not come back)) * Create a snapshot of rbd image * Clone the snapshot (temp clone) * Delete the snapshot * Snapshot the temp clone * Clone the snapshot (final clone) * Delete the snapshot ```bash 1) check the image depth of the parent image if flatten required add a task to flatten image and return ABORT to avoid leak (hardlimit-2 and softlimit-2 check will be done) 2) Reserve omap keys 2) rbd snap create <RBD image for src k8s volume>@<random snap name> 3) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 4) rbd snap rm <RBD image for src k8s volume>@<random snap name> 5) rbd snap create <cloned RBD image created in snapshot process>@<random snap name> 6) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 7)rbd snap rm <RBD image for src k8s volume>@<random snap name> ``` * Delete temporary clone image created as part of clone(delete if present) * Delete rbd image Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-07-07 12:14:19 +00:00
return nil, nil, status.Error(codes.Internal, err.Error())
}
return nil, nil, status.Errorf(codes.NotFound, "%s snapshot does not exist", snapshotID)
}
rbd: Add support for smart cloning Added support for RBD PVC to PVC cloning, below commands are executed to create a PVC-PVC clone from RBD side. * Check the depth(n) of the cloned image if n>=(hard limit -2) or ((soft limit-2) Add a task to flatten the image and return about (to avoid image leak) **Note** will try to flatten the temp clone image in the chain if available * Reserve the key and values in omap (this will help us to avoid the leak as it's not reserved earlier as we have returned ABORT (the request may not come back)) * Create a snapshot of rbd image * Clone the snapshot (temp clone) * Delete the snapshot * Snapshot the temp clone * Clone the snapshot (final clone) * Delete the snapshot ```bash 1) check the image depth of the parent image if flatten required add a task to flatten image and return ABORT to avoid leak (hardlimit-2 and softlimit-2 check will be done) 2) Reserve omap keys 2) rbd snap create <RBD image for src k8s volume>@<random snap name> 3) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 4) rbd snap rm <RBD image for src k8s volume>@<random snap name> 5) rbd snap create <cloned RBD image created in snapshot process>@<random snap name> 6) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 7)rbd snap rm <RBD image for src k8s volume>@<random snap name> ``` * Delete temporary clone image created as part of clone(delete if present) * Delete rbd image Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-07-07 12:14:19 +00:00
return nil, rbdSnap, nil
case *csi.VolumeContentSource_Volume:
vol := req.VolumeContentSource.GetVolume()
if vol == nil {
return nil, nil, status.Error(codes.NotFound, "volume cannot be empty")
}
volID := vol.GetVolumeId()
if volID == "" {
return nil, nil, status.Errorf(codes.NotFound, "volume ID cannot be empty")
}
rbdvol, err := GenVolFromVolID(ctx, volID, cr, req.GetSecrets())
rbd: Add support for smart cloning Added support for RBD PVC to PVC cloning, below commands are executed to create a PVC-PVC clone from RBD side. * Check the depth(n) of the cloned image if n>=(hard limit -2) or ((soft limit-2) Add a task to flatten the image and return about (to avoid image leak) **Note** will try to flatten the temp clone image in the chain if available * Reserve the key and values in omap (this will help us to avoid the leak as it's not reserved earlier as we have returned ABORT (the request may not come back)) * Create a snapshot of rbd image * Clone the snapshot (temp clone) * Delete the snapshot * Snapshot the temp clone * Clone the snapshot (final clone) * Delete the snapshot ```bash 1) check the image depth of the parent image if flatten required add a task to flatten image and return ABORT to avoid leak (hardlimit-2 and softlimit-2 check will be done) 2) Reserve omap keys 2) rbd snap create <RBD image for src k8s volume>@<random snap name> 3) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 4) rbd snap rm <RBD image for src k8s volume>@<random snap name> 5) rbd snap create <cloned RBD image created in snapshot process>@<random snap name> 6) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 7)rbd snap rm <RBD image for src k8s volume>@<random snap name> ``` * Delete temporary clone image created as part of clone(delete if present) * Delete rbd image Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-07-07 12:14:19 +00:00
if err != nil {
log.ErrorLog(ctx, "failed to get backend image for %s: %v", volID, err)
if !errors.Is(err, ErrImageNotFound) {
rbd: Add support for smart cloning Added support for RBD PVC to PVC cloning, below commands are executed to create a PVC-PVC clone from RBD side. * Check the depth(n) of the cloned image if n>=(hard limit -2) or ((soft limit-2) Add a task to flatten the image and return about (to avoid image leak) **Note** will try to flatten the temp clone image in the chain if available * Reserve the key and values in omap (this will help us to avoid the leak as it's not reserved earlier as we have returned ABORT (the request may not come back)) * Create a snapshot of rbd image * Clone the snapshot (temp clone) * Delete the snapshot * Snapshot the temp clone * Clone the snapshot (final clone) * Delete the snapshot ```bash 1) check the image depth of the parent image if flatten required add a task to flatten image and return ABORT to avoid leak (hardlimit-2 and softlimit-2 check will be done) 2) Reserve omap keys 2) rbd snap create <RBD image for src k8s volume>@<random snap name> 3) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 4) rbd snap rm <RBD image for src k8s volume>@<random snap name> 5) rbd snap create <cloned RBD image created in snapshot process>@<random snap name> 6) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 7)rbd snap rm <RBD image for src k8s volume>@<random snap name> ``` * Delete temporary clone image created as part of clone(delete if present) * Delete rbd image Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-07-07 12:14:19 +00:00
return nil, nil, status.Error(codes.Internal, err.Error())
}
return nil, nil, status.Errorf(codes.NotFound, "%s image does not exist", volID)
rbd: Add support for smart cloning Added support for RBD PVC to PVC cloning, below commands are executed to create a PVC-PVC clone from RBD side. * Check the depth(n) of the cloned image if n>=(hard limit -2) or ((soft limit-2) Add a task to flatten the image and return about (to avoid image leak) **Note** will try to flatten the temp clone image in the chain if available * Reserve the key and values in omap (this will help us to avoid the leak as it's not reserved earlier as we have returned ABORT (the request may not come back)) * Create a snapshot of rbd image * Clone the snapshot (temp clone) * Delete the snapshot * Snapshot the temp clone * Clone the snapshot (final clone) * Delete the snapshot ```bash 1) check the image depth of the parent image if flatten required add a task to flatten image and return ABORT to avoid leak (hardlimit-2 and softlimit-2 check will be done) 2) Reserve omap keys 2) rbd snap create <RBD image for src k8s volume>@<random snap name> 3) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 4) rbd snap rm <RBD image for src k8s volume>@<random snap name> 5) rbd snap create <cloned RBD image created in snapshot process>@<random snap name> 6) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 7)rbd snap rm <RBD image for src k8s volume>@<random snap name> ``` * Delete temporary clone image created as part of clone(delete if present) * Delete rbd image Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-07-07 12:14:19 +00:00
}
rbd: Add support for smart cloning Added support for RBD PVC to PVC cloning, below commands are executed to create a PVC-PVC clone from RBD side. * Check the depth(n) of the cloned image if n>=(hard limit -2) or ((soft limit-2) Add a task to flatten the image and return about (to avoid image leak) **Note** will try to flatten the temp clone image in the chain if available * Reserve the key and values in omap (this will help us to avoid the leak as it's not reserved earlier as we have returned ABORT (the request may not come back)) * Create a snapshot of rbd image * Clone the snapshot (temp clone) * Delete the snapshot * Snapshot the temp clone * Clone the snapshot (final clone) * Delete the snapshot ```bash 1) check the image depth of the parent image if flatten required add a task to flatten image and return ABORT to avoid leak (hardlimit-2 and softlimit-2 check will be done) 2) Reserve omap keys 2) rbd snap create <RBD image for src k8s volume>@<random snap name> 3) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 4) rbd snap rm <RBD image for src k8s volume>@<random snap name> 5) rbd snap create <cloned RBD image created in snapshot process>@<random snap name> 6) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 7)rbd snap rm <RBD image for src k8s volume>@<random snap name> ``` * Delete temporary clone image created as part of clone(delete if present) * Delete rbd image Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-07-07 12:14:19 +00:00
return rbdvol, nil, nil
}
rbd: Add support for smart cloning Added support for RBD PVC to PVC cloning, below commands are executed to create a PVC-PVC clone from RBD side. * Check the depth(n) of the cloned image if n>=(hard limit -2) or ((soft limit-2) Add a task to flatten the image and return about (to avoid image leak) **Note** will try to flatten the temp clone image in the chain if available * Reserve the key and values in omap (this will help us to avoid the leak as it's not reserved earlier as we have returned ABORT (the request may not come back)) * Create a snapshot of rbd image * Clone the snapshot (temp clone) * Delete the snapshot * Snapshot the temp clone * Clone the snapshot (final clone) * Delete the snapshot ```bash 1) check the image depth of the parent image if flatten required add a task to flatten image and return ABORT to avoid leak (hardlimit-2 and softlimit-2 check will be done) 2) Reserve omap keys 2) rbd snap create <RBD image for src k8s volume>@<random snap name> 3) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 4) rbd snap rm <RBD image for src k8s volume>@<random snap name> 5) rbd snap create <cloned RBD image created in snapshot process>@<random snap name> 6) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 7)rbd snap rm <RBD image for src k8s volume>@<random snap name> ``` * Delete temporary clone image created as part of clone(delete if present) * Delete rbd image Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-07-07 12:14:19 +00:00
return nil, nil, status.Errorf(codes.InvalidArgument, "not a proper volume source")
}
// checkErrAndUndoReserve work on error from GenVolFromVolID() and undo omap reserve.
// Even-though volumeID is part of rbdVolume struct we take it as an arg here, the main reason
// being, the volume id is getting filled from `GenVolFromVolID->generateVolumeFromVolumeID` call path,
// and this function is operating on the error case/scenario of above call chain, so we can not rely
// on the 'rbdvol->rbdimage->voldID' field.
func (cs *ControllerServer) checkErrAndUndoReserve(
ctx context.Context,
err error,
volumeID string,
rbdVol *rbdVolume, cr *util.Credentials) (*csi.DeleteVolumeResponse, error) {
if errors.Is(err, util.ErrPoolNotFound) {
log.WarningLog(ctx, "failed to get backend volume for %s: %v", volumeID, err)
return &csi.DeleteVolumeResponse{}, nil
}
// if error is ErrKeyNotFound, then a previous attempt at deletion was complete
// or partially complete (image and imageOMap are garbage collected already), hence return
// success as deletion is complete
if errors.Is(err, util.ErrKeyNotFound) {
log.WarningLog(ctx, "failed to volume options for %s: %v", volumeID, err)
return &csi.DeleteVolumeResponse{}, nil
}
if errors.Is(err, ErrImageNotFound) {
err = rbdVol.ensureImageCleanup(ctx)
if err != nil {
return nil, status.Error(codes.Internal, err.Error())
}
} else {
// All errors other than ErrImageNotFound should return an error back to the caller
return nil, status.Error(codes.Internal, err.Error())
}
// If error is ErrImageNotFound then we failed to find the image, but found the imageOMap
// to lead us to the image, hence the imageOMap needs to be garbage collected, by calling
// unreserve for the same
if acquired := cs.VolumeLocks.TryAcquire(rbdVol.RequestName); !acquired {
log.ErrorLog(ctx, util.VolumeOperationAlreadyExistsFmt, rbdVol.RequestName)
return nil, status.Errorf(codes.Aborted, util.VolumeOperationAlreadyExistsFmt, rbdVol.RequestName)
}
defer cs.VolumeLocks.Release(rbdVol.RequestName)
if err = undoVolReservation(ctx, rbdVol, cr); err != nil {
return nil, status.Error(codes.Internal, err.Error())
}
return &csi.DeleteVolumeResponse{}, nil
}
// DeleteVolume deletes the volume in backend and removes the volume metadata
// from store.
func (cs *ControllerServer) DeleteVolume(
ctx context.Context,
req *csi.DeleteVolumeRequest) (*csi.DeleteVolumeResponse, error) {
var err error
if err = cs.Driver.ValidateControllerServiceRequest(
csi.ControllerServiceCapability_RPC_CREATE_DELETE_VOLUME); err != nil {
log.ErrorLog(ctx, "invalid delete volume req: %v", protosanitizer.StripSecrets(req))
2018-01-09 18:59:50 +00:00
return nil, err
}
2018-01-09 18:59:50 +00:00
// For now the image get unconditionally deleted, but here retention policy can be checked
volumeID := req.GetVolumeId()
if volumeID == "" {
return nil, status.Error(codes.InvalidArgument, "empty volume ID in request")
}
cr, err := util.NewUserCredentialsWithMigration(req.GetSecrets())
if err != nil {
return nil, status.Error(codes.InvalidArgument, err.Error())
}
defer cr.DeleteCredentials()
if acquired := cs.VolumeLocks.TryAcquire(volumeID); !acquired {
log.ErrorLog(ctx, util.VolumeOperationAlreadyExistsFmt, volumeID)
return nil, status.Errorf(codes.Aborted, util.VolumeOperationAlreadyExistsFmt, volumeID)
}
defer cs.VolumeLocks.Release(volumeID)
// lock out volumeID for clone and expand operation
if err = cs.OperationLocks.GetDeleteLock(volumeID); err != nil {
log.ErrorLog(ctx, err.Error())
return nil, status.Error(codes.Aborted, err.Error())
}
defer cs.OperationLocks.ReleaseDeleteLock(volumeID)
// if this is a migration request volID, delete the volume in backend
if isMigrationVolID(volumeID) {
pmVolID, pErr := parseMigrationVolID(volumeID)
if pErr != nil {
return nil, status.Error(codes.InvalidArgument, pErr.Error())
}
pErr = deleteMigratedVolume(ctx, pmVolID, cr)
if pErr != nil && !errors.Is(pErr, ErrImageNotFound) {
return nil, status.Error(codes.Internal, pErr.Error())
}
return &csi.DeleteVolumeResponse{}, nil
}
rbdVol, err := GenVolFromVolID(ctx, volumeID, cr, req.GetSecrets())
defer rbdVol.Destroy()
if err != nil {
return cs.checkErrAndUndoReserve(ctx, err, volumeID, rbdVol, cr)
}
// lock out parallel create requests against the same volume name as we
// clean up the image and associated omaps for the same
if acquired := cs.VolumeLocks.TryAcquire(rbdVol.RequestName); !acquired {
log.ErrorLog(ctx, util.VolumeOperationAlreadyExistsFmt, rbdVol.RequestName)
return nil, status.Errorf(codes.Aborted, util.VolumeOperationAlreadyExistsFmt, rbdVol.RequestName)
}
defer cs.VolumeLocks.Release(rbdVol.RequestName)
return cleanupRBDImage(ctx, rbdVol, cr)
}
// cleanupRBDImage removes the rbd image and OMAP metadata associated with it.
func cleanupRBDImage(ctx context.Context,
rbdVol *rbdVolume, cr *util.Credentials) (*csi.DeleteVolumeResponse, error) {
mirroringInfo, err := rbdVol.getImageMirroringInfo()
if err != nil {
log.ErrorLog(ctx, err.Error())
return nil, status.Error(codes.Internal, err.Error())
}
// Cleanup only omap data if the following condition is met
// Mirroring is enabled on the image
// Local image is secondary
// Local image is in up+replaying state
if mirroringInfo.State == librbd.MirrorImageEnabled && !mirroringInfo.Primary {
// If the image is in a secondary state and its up+replaying means its
// an healthy secondary and the image is primary somewhere in the
// remote cluster and the local image is getting replayed. Delete the
// OMAP data generated as we cannot delete the secondary image. When
// the image on the primary cluster gets deleted/mirroring disabled,
// the image on all the remote (secondary) clusters will get
// auto-deleted. This helps in garbage collecting the OMAP, PVC and PV
// objects after failback operation.
localStatus, rErr := rbdVol.getLocalState()
if rErr != nil {
return nil, status.Error(codes.Internal, rErr.Error())
}
if localStatus.Up && localStatus.State == librbd.MirrorImageStatusStateReplaying {
if err = undoVolReservation(ctx, rbdVol, cr); err != nil {
log.ErrorLog(ctx, "failed to remove reservation for volume (%s) with backing image (%s) (%s)",
rbdVol.RequestName, rbdVol.RbdImageName, err)
return nil, status.Error(codes.Internal, err.Error())
}
return &csi.DeleteVolumeResponse{}, nil
}
log.ErrorLog(ctx,
"secondary image status is up=%t and state=%s",
localStatus.Up,
localStatus.State)
}
inUse, err := rbdVol.isInUse()
if err != nil {
log.ErrorLog(ctx, "failed getting information for image (%s): (%s)", rbdVol, err)
return nil, status.Error(codes.Internal, err.Error())
}
if inUse {
log.ErrorLog(ctx, "rbd %s is still being used", rbdVol)
return nil, status.Errorf(codes.Internal, "rbd %s is still being used", rbdVol.RbdImageName)
}
rbd: Add support for smart cloning Added support for RBD PVC to PVC cloning, below commands are executed to create a PVC-PVC clone from RBD side. * Check the depth(n) of the cloned image if n>=(hard limit -2) or ((soft limit-2) Add a task to flatten the image and return about (to avoid image leak) **Note** will try to flatten the temp clone image in the chain if available * Reserve the key and values in omap (this will help us to avoid the leak as it's not reserved earlier as we have returned ABORT (the request may not come back)) * Create a snapshot of rbd image * Clone the snapshot (temp clone) * Delete the snapshot * Snapshot the temp clone * Clone the snapshot (final clone) * Delete the snapshot ```bash 1) check the image depth of the parent image if flatten required add a task to flatten image and return ABORT to avoid leak (hardlimit-2 and softlimit-2 check will be done) 2) Reserve omap keys 2) rbd snap create <RBD image for src k8s volume>@<random snap name> 3) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 4) rbd snap rm <RBD image for src k8s volume>@<random snap name> 5) rbd snap create <cloned RBD image created in snapshot process>@<random snap name> 6) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 7)rbd snap rm <RBD image for src k8s volume>@<random snap name> ``` * Delete temporary clone image created as part of clone(delete if present) * Delete rbd image Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-07-07 12:14:19 +00:00
// delete the temporary rbd image created as part of volume clone during
// create volume
tempClone := rbdVol.generateTempClone()
err = tempClone.deleteImage(ctx)
rbd: Add support for smart cloning Added support for RBD PVC to PVC cloning, below commands are executed to create a PVC-PVC clone from RBD side. * Check the depth(n) of the cloned image if n>=(hard limit -2) or ((soft limit-2) Add a task to flatten the image and return about (to avoid image leak) **Note** will try to flatten the temp clone image in the chain if available * Reserve the key and values in omap (this will help us to avoid the leak as it's not reserved earlier as we have returned ABORT (the request may not come back)) * Create a snapshot of rbd image * Clone the snapshot (temp clone) * Delete the snapshot * Snapshot the temp clone * Clone the snapshot (final clone) * Delete the snapshot ```bash 1) check the image depth of the parent image if flatten required add a task to flatten image and return ABORT to avoid leak (hardlimit-2 and softlimit-2 check will be done) 2) Reserve omap keys 2) rbd snap create <RBD image for src k8s volume>@<random snap name> 3) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 4) rbd snap rm <RBD image for src k8s volume>@<random snap name> 5) rbd snap create <cloned RBD image created in snapshot process>@<random snap name> 6) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 7)rbd snap rm <RBD image for src k8s volume>@<random snap name> ``` * Delete temporary clone image created as part of clone(delete if present) * Delete rbd image Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-07-07 12:14:19 +00:00
if err != nil {
if errors.Is(err, ErrImageNotFound) {
err = tempClone.ensureImageCleanup(ctx)
if err != nil {
return nil, status.Error(codes.Internal, err.Error())
}
} else {
// return error if it is not ErrImageNotFound
log.ErrorLog(ctx, "failed to delete rbd image: %s with error: %v",
rbd: Add support for smart cloning Added support for RBD PVC to PVC cloning, below commands are executed to create a PVC-PVC clone from RBD side. * Check the depth(n) of the cloned image if n>=(hard limit -2) or ((soft limit-2) Add a task to flatten the image and return about (to avoid image leak) **Note** will try to flatten the temp clone image in the chain if available * Reserve the key and values in omap (this will help us to avoid the leak as it's not reserved earlier as we have returned ABORT (the request may not come back)) * Create a snapshot of rbd image * Clone the snapshot (temp clone) * Delete the snapshot * Snapshot the temp clone * Clone the snapshot (final clone) * Delete the snapshot ```bash 1) check the image depth of the parent image if flatten required add a task to flatten image and return ABORT to avoid leak (hardlimit-2 and softlimit-2 check will be done) 2) Reserve omap keys 2) rbd snap create <RBD image for src k8s volume>@<random snap name> 3) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 4) rbd snap rm <RBD image for src k8s volume>@<random snap name> 5) rbd snap create <cloned RBD image created in snapshot process>@<random snap name> 6) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 7)rbd snap rm <RBD image for src k8s volume>@<random snap name> ``` * Delete temporary clone image created as part of clone(delete if present) * Delete rbd image Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-07-07 12:14:19 +00:00
tempClone, err)
rbd: Add support for smart cloning Added support for RBD PVC to PVC cloning, below commands are executed to create a PVC-PVC clone from RBD side. * Check the depth(n) of the cloned image if n>=(hard limit -2) or ((soft limit-2) Add a task to flatten the image and return about (to avoid image leak) **Note** will try to flatten the temp clone image in the chain if available * Reserve the key and values in omap (this will help us to avoid the leak as it's not reserved earlier as we have returned ABORT (the request may not come back)) * Create a snapshot of rbd image * Clone the snapshot (temp clone) * Delete the snapshot * Snapshot the temp clone * Clone the snapshot (final clone) * Delete the snapshot ```bash 1) check the image depth of the parent image if flatten required add a task to flatten image and return ABORT to avoid leak (hardlimit-2 and softlimit-2 check will be done) 2) Reserve omap keys 2) rbd snap create <RBD image for src k8s volume>@<random snap name> 3) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 4) rbd snap rm <RBD image for src k8s volume>@<random snap name> 5) rbd snap create <cloned RBD image created in snapshot process>@<random snap name> 6) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 7)rbd snap rm <RBD image for src k8s volume>@<random snap name> ``` * Delete temporary clone image created as part of clone(delete if present) * Delete rbd image Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-07-07 12:14:19 +00:00
return nil, status.Error(codes.Internal, err.Error())
}
}
// Deleting rbd image
log.DebugLog(ctx, "deleting image %s", rbdVol.RbdImageName)
if err = rbdVol.deleteImage(ctx); err != nil {
log.ErrorLog(ctx, "failed to delete rbd image: %s with error: %v",
rbdVol, err)
return nil, status.Error(codes.Internal, err.Error())
}
if err = undoVolReservation(ctx, rbdVol, cr); err != nil {
log.ErrorLog(ctx, "failed to remove reservation for volume (%s) with backing image (%s) (%s)",
rbdVol.RequestName, rbdVol.RbdImageName, err)
return nil, status.Error(codes.Internal, err.Error())
}
return &csi.DeleteVolumeResponse{}, nil
}
// ValidateVolumeCapabilities checks whether the volume capabilities requested
// are supported.
func (cs *ControllerServer) ValidateVolumeCapabilities(
ctx context.Context,
req *csi.ValidateVolumeCapabilitiesRequest) (*csi.ValidateVolumeCapabilitiesResponse, error) {
if req.GetVolumeId() == "" {
return nil, status.Error(codes.InvalidArgument, "empty volume ID in request")
}
if len(req.VolumeCapabilities) == 0 {
return nil, status.Error(codes.InvalidArgument, "empty volume capabilities in request")
}
for _, capability := range req.VolumeCapabilities {
if capability.GetAccessMode().GetMode() != csi.VolumeCapability_AccessMode_SINGLE_NODE_WRITER {
return &csi.ValidateVolumeCapabilitiesResponse{Message: ""}, nil
}
}
return &csi.ValidateVolumeCapabilitiesResponse{
Confirmed: &csi.ValidateVolumeCapabilitiesResponse_Confirmed{
VolumeCapabilities: req.VolumeCapabilities,
},
}, nil
}
// CreateSnapshot creates the snapshot in backend and stores metadata in store.
func (cs *ControllerServer) CreateSnapshot(
ctx context.Context,
req *csi.CreateSnapshotRequest) (*csi.CreateSnapshotResponse, error) {
if err := cs.validateSnapshotReq(ctx, req); err != nil {
return nil, err
2018-08-08 05:42:17 +00:00
}
cr, err := util.NewUserCredentials(req.GetSecrets())
if err != nil {
return nil, status.Error(codes.Internal, err.Error())
}
defer cr.DeleteCredentials()
// Fetch source volume information
rbdVol, err := GenVolFromVolID(ctx, req.GetSourceVolumeId(), cr, req.GetSecrets())
defer rbdVol.Destroy()
if err != nil {
switch {
case errors.Is(err, ErrImageNotFound):
err = status.Errorf(codes.NotFound, "source Volume ID %s not found", req.GetSourceVolumeId())
case errors.Is(err, util.ErrPoolNotFound):
log.ErrorLog(ctx, "failed to get backend volume for %s: %v", req.GetSourceVolumeId(), err)
err = status.Errorf(codes.NotFound, err.Error())
default:
err = status.Errorf(codes.Internal, err.Error())
}
return nil, err
2018-08-08 05:42:17 +00:00
}
// Check if source volume was created with required image features for snaps
if !rbdVol.hasSnapshotFeature() {
return nil, status.Errorf(
codes.InvalidArgument,
"volume(%s) has not snapshot feature(layering)",
req.GetSourceVolumeId())
2018-08-08 05:42:17 +00:00
}
rbdSnap, err := genSnapFromOptions(ctx, rbdVol, req.GetParameters())
if err != nil {
return nil, status.Error(codes.Internal, err.Error())
}
rbdSnap.RbdImageName = rbdVol.RbdImageName
rbdSnap.VolSize = rbdVol.VolSize
rbdSnap.SourceVolumeID = req.GetSourceVolumeId()
rbdSnap.RequestName = req.GetName()
if acquired := cs.SnapshotLocks.TryAcquire(req.GetName()); !acquired {
log.ErrorLog(ctx, util.SnapshotOperationAlreadyExistsFmt, req.GetName())
return nil, status.Errorf(codes.Aborted, util.VolumeOperationAlreadyExistsFmt, req.GetName())
}
defer cs.SnapshotLocks.Release(req.GetName())
// Take lock on parent rbd image
if err = cs.OperationLocks.GetSnapshotCreateLock(rbdSnap.SourceVolumeID); err != nil {
log.ErrorLog(ctx, err.Error())
return nil, status.Error(codes.Aborted, err.Error())
}
defer cs.OperationLocks.ReleaseSnapshotCreateLock(rbdSnap.SourceVolumeID)
// Need to check for already existing snapshot name, and if found
// check for the requested source volume id and already allocated source volume id
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
found, err := checkSnapCloneExists(ctx, rbdVol, rbdSnap, cr)
2018-08-08 05:42:17 +00:00
if err != nil {
if errors.Is(err, util.ErrSnapNameConflict) {
return nil, status.Error(codes.AlreadyExists, err.Error())
}
return nil, status.Errorf(codes.Internal, err.Error())
2018-08-08 05:42:17 +00:00
}
if found {
return cloneFromSnapshot(ctx, rbdVol, rbdSnap, cr)
2018-08-09 13:07:13 +00:00
}
err = flattenTemporaryClonedImages(ctx, rbdVol, cr)
if err != nil {
return nil, err
}
2018-08-09 13:07:13 +00:00
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
err = reserveSnap(ctx, rbdSnap, rbdVol, cr)
if err != nil {
return nil, status.Error(codes.Internal, err.Error())
}
defer func() {
if err != nil && !errors.Is(err, ErrFlattenInProgress) {
errDefer := undoSnapReservation(ctx, rbdSnap, cr)
if errDefer != nil {
log.WarningLog(ctx, "failed undoing reservation of snapshot: %s %v", req.GetName(), errDefer)
}
}
}()
vol, err := cs.doSnapshotClone(ctx, rbdVol, rbdSnap, cr)
if err != nil {
return nil, status.Error(codes.Internal, err.Error())
}
return &csi.CreateSnapshotResponse{
Snapshot: &csi.Snapshot{
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
SizeBytes: vol.VolSize,
SnapshotId: vol.VolID,
SourceVolumeId: req.GetSourceVolumeId(),
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
CreationTime: vol.CreatedAt,
ReadyToUse: true,
},
}, nil
}
// cloneFromSnapshot is a helper for CreateSnapshot that continues creating an
// RBD image from an RBD snapshot if the process was interrupted at one point.
func cloneFromSnapshot(
ctx context.Context,
rbdVol *rbdVolume,
rbdSnap *rbdSnapshot,
cr *util.Credentials) (*csi.CreateSnapshotResponse, error) {
vol := generateVolFromSnap(rbdSnap)
err := vol.Connect(cr)
if err != nil {
uErr := undoSnapshotCloning(ctx, rbdVol, rbdSnap, vol, cr)
if uErr != nil {
log.WarningLog(ctx, "failed undoing reservation of snapshot: %s %v", rbdSnap.RequestName, uErr)
}
return nil, status.Errorf(codes.Internal, err.Error())
}
defer vol.Destroy()
if rbdVol.isEncrypted() {
err = rbdVol.copyEncryptionConfig(&vol.rbdImage, false)
if err != nil {
return nil, status.Error(codes.Internal, err.Error())
}
}
err = vol.flattenRbdImage(ctx, false, rbdHardMaxCloneDepth, rbdSoftMaxCloneDepth)
if errors.Is(err, ErrFlattenInProgress) {
// if flattening is in progress, return error and do not cleanup
return nil, status.Errorf(codes.Internal, err.Error())
} else if err != nil {
uErr := undoSnapshotCloning(ctx, rbdVol, rbdSnap, vol, cr)
if uErr != nil {
log.WarningLog(ctx, "failed undoing reservation of snapshot: %s %v", rbdSnap.RequestName, uErr)
}
return nil, status.Errorf(codes.Internal, err.Error())
}
return &csi.CreateSnapshotResponse{
Snapshot: &csi.Snapshot{
SizeBytes: rbdSnap.VolSize,
SnapshotId: rbdSnap.VolID,
SourceVolumeId: rbdSnap.SourceVolumeID,
CreationTime: rbdSnap.CreatedAt,
ReadyToUse: true,
},
}, nil
}
func (cs *ControllerServer) validateSnapshotReq(ctx context.Context, req *csi.CreateSnapshotRequest) error {
if err := cs.Driver.ValidateControllerServiceRequest(
csi.ControllerServiceCapability_RPC_CREATE_DELETE_SNAPSHOT); err != nil {
log.ErrorLog(ctx, "invalid create snapshot req: %v", protosanitizer.StripSecrets(req))
return err
}
// Check sanity of request Snapshot Name, Source Volume Id
if req.Name == "" {
return status.Error(codes.InvalidArgument, "snapshot Name cannot be empty")
}
if req.SourceVolumeId == "" {
return status.Error(codes.InvalidArgument, "source Volume ID cannot be empty")
}
options := req.GetParameters()
if value, ok := options["snapshotNamePrefix"]; ok && value == "" {
return status.Error(codes.InvalidArgument, "empty snapshot name prefix to provision snapshot from")
}
if value, ok := options["pool"]; ok && value == "" {
return status.Error(codes.InvalidArgument, "empty pool name in which rbd image will be created")
}
return nil
}
func (cs *ControllerServer) doSnapshotClone(
ctx context.Context,
parentVol *rbdVolume,
rbdSnap *rbdSnapshot,
cr *util.Credentials) (*rbdVolume, error) {
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
// generate cloned volume details from snapshot
cloneRbd := generateVolFromSnap(rbdSnap)
defer cloneRbd.Destroy()
// add image feature for cloneRbd
f := []string{librbd.FeatureNameLayering, librbd.FeatureNameDeepFlatten}
cloneRbd.ImageFeatureSet = librbd.FeatureSetFromNames(f)
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
err := cloneRbd.Connect(cr)
if err != nil {
return cloneRbd, err
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
}
err = createRBDClone(ctx, parentVol, cloneRbd, rbdSnap)
2018-08-08 05:42:17 +00:00
if err != nil {
log.ErrorLog(ctx, "failed to create snapshot: %v", err)
return cloneRbd, err
}
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
defer func() {
if err != nil {
if !errors.Is(err, ErrFlattenInProgress) {
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
// cleanup clone and snapshot
errCleanUp := cleanUpSnapshot(ctx, cloneRbd, rbdSnap, cloneRbd)
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
if errCleanUp != nil {
log.ErrorLog(ctx, "failed to cleanup snapshot and clone: %v", errCleanUp)
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
}
2018-08-08 05:42:17 +00:00
}
}
}()
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
if parentVol.isEncrypted() {
cryptErr := parentVol.copyEncryptionConfig(&cloneRbd.rbdImage, false)
if cryptErr != nil {
log.WarningLog(ctx, "failed copy encryption "+
"config for %q: %v", cloneRbd, cryptErr)
return nil, err
}
}
err = cloneRbd.createSnapshot(ctx, rbdSnap)
if err != nil {
// update rbd image name for logging
rbdSnap.RbdImageName = cloneRbd.RbdImageName
log.ErrorLog(ctx, "failed to create snapshot %s: %v", rbdSnap, err)
return cloneRbd, err
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
}
err = cloneRbd.getImageID()
if err != nil {
log.ErrorLog(ctx, "failed to get image id: %v", err)
return cloneRbd, err
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
}
// save image ID
j, err := snapJournal.Connect(rbdSnap.Monitors, rbdSnap.RadosNamespace, cr)
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
if err != nil {
log.ErrorLog(ctx, "failed to connect to cluster: %v", err)
return cloneRbd, err
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
}
defer j.Destroy()
err = j.StoreImageID(ctx, rbdSnap.JournalPool, rbdSnap.ReservedID, cloneRbd.ImageID)
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
if err != nil {
log.ErrorLog(ctx, "failed to reserve volume id: %v", err)
return cloneRbd, err
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
}
err = cloneRbd.flattenRbdImage(ctx, false, rbdHardMaxCloneDepth, rbdSoftMaxCloneDepth)
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
if err != nil {
return cloneRbd, err
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
}
return cloneRbd, nil
2018-08-08 05:42:17 +00:00
}
// DeleteSnapshot deletes the snapshot in backend and removes the
// snapshot metadata from store.
func (cs *ControllerServer) DeleteSnapshot(
ctx context.Context,
req *csi.DeleteSnapshotRequest) (*csi.DeleteSnapshotResponse, error) {
if err := cs.Driver.ValidateControllerServiceRequest(
csi.ControllerServiceCapability_RPC_CREATE_DELETE_SNAPSHOT); err != nil {
log.ErrorLog(ctx, "invalid delete snapshot req: %v", protosanitizer.StripSecrets(req))
2018-08-08 05:42:17 +00:00
return nil, err
}
cr, err := util.NewUserCredentials(req.GetSecrets())
if err != nil {
return nil, status.Error(codes.Internal, err.Error())
}
defer cr.DeleteCredentials()
2018-08-08 05:42:17 +00:00
snapshotID := req.GetSnapshotId()
if snapshotID == "" {
return nil, status.Error(codes.InvalidArgument, "snapshot ID cannot be empty")
2018-08-08 05:42:17 +00:00
}
if acquired := cs.SnapshotLocks.TryAcquire(snapshotID); !acquired {
log.ErrorLog(ctx, util.SnapshotOperationAlreadyExistsFmt, snapshotID)
return nil, status.Errorf(codes.Aborted, util.VolumeOperationAlreadyExistsFmt, snapshotID)
}
defer cs.SnapshotLocks.Release(snapshotID)
// lock out snapshotID for restore operation
if err = cs.OperationLocks.GetDeleteLock(snapshotID); err != nil {
log.ErrorLog(ctx, err.Error())
return nil, status.Error(codes.Aborted, err.Error())
}
defer cs.OperationLocks.ReleaseDeleteLock(snapshotID)
2018-08-08 05:42:17 +00:00
rbdSnap := &rbdSnapshot{}
if err = genSnapFromSnapID(ctx, rbdSnap, snapshotID, cr, req.GetSecrets()); err != nil {
// if error is ErrPoolNotFound, the pool is already deleted we don't
// need to worry about deleting snapshot or omap data, return success
if errors.Is(err, util.ErrPoolNotFound) {
log.WarningLog(ctx, "failed to get backend snapshot for %s: %v", snapshotID, err)
return &csi.DeleteSnapshotResponse{}, nil
}
// if error is ErrKeyNotFound, then a previous attempt at deletion was complete
// or partially complete (snap and snapOMap are garbage collected already), hence return
// success as deletion is complete
if errors.Is(err, util.ErrKeyNotFound) {
return &csi.DeleteSnapshotResponse{}, nil
}
// if the error is ErrImageNotFound, We need to cleanup the image from
// trash and remove the metadata in OMAP.
if errors.Is(err, ErrImageNotFound) {
err = cleanUpImageAndSnapReservation(ctx, rbdSnap, cr)
if err != nil {
return nil, status.Error(codes.Internal, err.Error())
}
return &csi.DeleteSnapshotResponse{}, nil
}
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
return nil, status.Error(codes.Internal, err.Error())
2018-08-08 05:42:17 +00:00
}
// safeguard against parallel create or delete requests against the same
// name
if acquired := cs.SnapshotLocks.TryAcquire(rbdSnap.RequestName); !acquired {
log.ErrorLog(ctx, util.SnapshotOperationAlreadyExistsFmt, rbdSnap.RequestName)
return nil, status.Errorf(codes.Aborted, util.VolumeOperationAlreadyExistsFmt, rbdSnap.RequestName)
}
defer cs.SnapshotLocks.Release(rbdSnap.RequestName)
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
// Deleting snapshot and cloned volume
log.DebugLog(ctx, "deleting cloned rbd volume %s", rbdSnap.RbdSnapName)
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
rbdVol := generateVolFromSnap(rbdSnap)
err = rbdVol.Connect(cr)
if err != nil {
return nil, status.Error(codes.Internal, err.Error())
}
defer rbdVol.Destroy()
rbdVol.ImageID = rbdSnap.ImageID
// update parent name to delete the snapshot
rbdSnap.RbdImageName = rbdVol.RbdImageName
err = cleanUpSnapshot(ctx, rbdVol, rbdSnap, rbdVol)
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
if err != nil {
log.ErrorLog(ctx, "failed to delete image: %v", err)
return nil, status.Error(codes.Internal, err.Error())
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
}
err = undoSnapReservation(ctx, rbdSnap, cr)
if err != nil {
log.ErrorLog(ctx, "failed to remove reservation for snapname (%s) with backing snap (%s) on image (%s) (%s)",
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
rbdSnap.RequestName, rbdSnap.RbdSnapName, rbdSnap.RbdImageName, err)
rbd: Implement snapshot and clone from snapshot This Adds a support for create,delete snapshot and creating a new rbd image from the snapshot. * Create a snapshot * Create a temporary snapshot from the parent volume * Clone a new image from a temporary snapshot with options --rbd-default-clone-format 2 --image-feature layering,deep-flatten * Delete temporary snapshot created * Create a new snapshot from cloned image * Check the image chain depth, if the Softlimit is reached Add a task Flatten the cloned image and return success. if the depth is reached hard limit Add a task Flatten the cloned image and return snapshot status ready as false ```bash 1) rbd snap create <RBD image for src k8s volume>@<random snap name> 2) rbd clone --rbd-default-clone-format 2 --image-feature layering,deep-flatten <RBD image for src k8s volume>@<random snap> <RBD image for temporary snap image> 3) rbd snap rm <RBD image for src k8s volume>@<random snap name> 4) rbd snap rm <RBD image for temporary snap image>@<random snap name> 5) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return snapshot status ready as false if the depth is greater than soft limit add a task to flatten the image and return success ``` * Create a clone from snapshot * Clone a new image from the snapshot with user-provided options * Check the depth(n) of the cloned image if n>=(hard limit) Add task to flatten the image and return ABORT (to avoid image leak) ```bash 1) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config> <RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol> 2) check the depth, if the depth is greater than configured hard limit add a task to flatten the cloned image return ABORT error if the depth is greater than soft limit add a task to flatten the image and return success ``` * Delete snapshot or pvc * Move the temporary cloned image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <cloned image> 2) ceph rbd task trash remove <cloned image> ``` With earlier implementation to delete the image, we used to add a task to remove the image with new changes this cannot be done as the image may contain snapshots or linking.so we will be doing below steps to delete an image(this will be applicable for both normal image and cloned image) * Move the rbd image to the trash * Add task to remove the image from the trash ```bash 1) rbd trash mv <image> 2) ceph rbd task trash remove <image> ``` Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-06-24 07:43:24 +00:00
return nil, status.Error(codes.Internal, err.Error())
2018-08-08 05:42:17 +00:00
}
return &csi.DeleteSnapshotResponse{}, nil
}
// cleanUpImageAndSnapReservation cleans up the image from the trash and
// snapshot reservation in rados OMAP.
func cleanUpImageAndSnapReservation(ctx context.Context, rbdSnap *rbdSnapshot, cr *util.Credentials) error {
rbdVol := generateVolFromSnap(rbdSnap)
err := rbdVol.Connect(cr)
if err != nil {
return status.Error(codes.Internal, err.Error())
}
defer rbdVol.Destroy()
err = rbdVol.openIoctx()
if err != nil {
return status.Error(codes.Internal, err.Error())
}
// cleanup the image from trash if the error is image not found.
err = rbdVol.ensureImageCleanup(ctx)
if err != nil {
log.ErrorLog(ctx, "failed to delete rbd image: %q with error: %v", rbdVol.Pool, rbdVol.VolName, err)
return status.Error(codes.Internal, err.Error())
}
err = undoSnapReservation(ctx, rbdSnap, cr)
if err != nil {
log.ErrorLog(ctx, "failed to remove reservation for snapname (%s) with backing snap %q",
rbdSnap.RequestName, rbdSnap, err)
return status.Error(codes.Internal, err.Error())
}
return nil
}
// ControllerExpandVolume expand RBD Volumes on demand based on resizer request.
func (cs *ControllerServer) ControllerExpandVolume(
ctx context.Context,
req *csi.ControllerExpandVolumeRequest) (*csi.ControllerExpandVolumeResponse, error) {
err := cs.Driver.ValidateControllerServiceRequest(csi.ControllerServiceCapability_RPC_EXPAND_VOLUME)
if err != nil {
log.ErrorLog(ctx, "invalid expand volume req: %v", protosanitizer.StripSecrets(req))
return nil, err
}
volID := req.GetVolumeId()
if volID == "" {
return nil, status.Error(codes.InvalidArgument, "volume ID cannot be empty")
}
capRange := req.GetCapacityRange()
if capRange == nil {
return nil, status.Error(codes.InvalidArgument, "capacityRange cannot be empty")
}
// lock out parallel requests against the same volume ID
if acquired := cs.VolumeLocks.TryAcquire(volID); !acquired {
log.ErrorLog(ctx, util.VolumeOperationAlreadyExistsFmt, volID)
return nil, status.Errorf(codes.Aborted, util.VolumeOperationAlreadyExistsFmt, volID)
}
defer cs.VolumeLocks.Release(volID)
cr, err := util.NewUserCredentialsWithMigration(req.GetSecrets())
if err != nil {
return nil, status.Error(codes.InvalidArgument, err.Error())
}
defer cr.DeleteCredentials()
rbdVol, err := genVolFromVolIDWithMigration(ctx, volID, cr, req.GetSecrets())
if err != nil {
switch {
case errors.Is(err, ErrImageNotFound):
err = status.Errorf(codes.NotFound, "volume ID %s not found", volID)
case errors.Is(err, util.ErrPoolNotFound):
log.ErrorLog(ctx, "failed to get backend volume for %s: %v", volID, err)
err = status.Errorf(codes.NotFound, err.Error())
default:
err = status.Errorf(codes.Internal, err.Error())
}
return nil, err
}
defer rbdVol.Destroy()
// NodeExpansion is needed for PersistentVolumes with,
// 1. Filesystem VolumeMode with & without Encryption and
// 2. Block VolumeMode with Encryption
// Hence set nodeExpansion flag based on VolumeMode and Encryption status
nodeExpansion := true
if req.GetVolumeCapability().GetBlock() != nil && !rbdVol.isEncrypted() {
nodeExpansion = false
}
// lock out volumeID for clone and delete operation
if err = cs.OperationLocks.GetExpandLock(volID); err != nil {
log.ErrorLog(ctx, err.Error())
return nil, status.Error(codes.Aborted, err.Error())
}
defer cs.OperationLocks.ReleaseExpandLock(volID)
// always round up the request size in bytes to the nearest MiB/GiB
volSize := util.RoundOffBytes(req.GetCapacityRange().GetRequiredBytes())
// resize volume if required
if rbdVol.VolSize < volSize {
log.DebugLog(ctx, "rbd volume %s size is %v,resizing to %v", rbdVol, rbdVol.VolSize, volSize)
err = rbdVol.resize(volSize)
if err != nil {
log.ErrorLog(ctx, "failed to resize rbd image: %s with error: %v", rbdVol, err)
return nil, status.Error(codes.Internal, err.Error())
}
}
return &csi.ControllerExpandVolumeResponse{
CapacityBytes: rbdVol.VolSize,
NodeExpansionRequired: nodeExpansion,
}, nil
}