vendor update for E2E framework

Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>

vendor/k8s.io/client-go/tools/remotecommand/doc.go

@@ -0,0 +1,20 @@
+/*
+Copyright 2015 The Kubernetes Authors.
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+*/
+
+// Package remotecommand adds support for executing commands in containers,
+// with support for separate stdin, stdout, and stderr streams, as well as
+// TTY.
+package remotecommand // import "k8s.io/client-go/tools/remotecommand"

vendor/k8s.io/client-go/tools/remotecommand/errorstream.go

@@ -0,0 +1,55 @@
+/*
+Copyright 2016 The Kubernetes Authors.
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+*/
+
+package remotecommand
+
+import (
+	"fmt"
+	"io"
+	"io/ioutil"
+
+	"k8s.io/apimachinery/pkg/util/runtime"
+)
+
+// errorStreamDecoder interprets the data on the error channel and creates a go error object from it.
+type errorStreamDecoder interface {
+	decode(message []byte) error
+}
+
+// watchErrorStream watches the errorStream for remote command error data,
+// decodes it with the given errorStreamDecoder, sends the decoded error (or nil if the remote
+// command exited successfully) to the returned error channel, and closes it.
+// This function returns immediately.
+func watchErrorStream(errorStream io.Reader, d errorStreamDecoder) chan error {
+	errorChan := make(chan error)
+
+	go func() {
+		defer runtime.HandleCrash()
+
+		message, err := ioutil.ReadAll(errorStream)
+		switch {
+		case err != nil && err != io.EOF:
+			errorChan <- fmt.Errorf("error reading from error stream: %s", err)
+		case len(message) > 0:
+			errorChan <- d.decode(message)
+		default:
+			errorChan <- nil
+		}
+		close(errorChan)
+	}()
+
+	return errorChan
+}

vendor/k8s.io/client-go/tools/remotecommand/reader.go

@@ -0,0 +1,41 @@
+/*
+Copyright 2018 The Kubernetes Authors.
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+*/
+
+package remotecommand
+
+import (
+	"io"
+)
+
+// readerWrapper delegates to an io.Reader so that only the io.Reader interface is implemented,
+// to keep io.Copy from doing things we don't want when copying from the reader to the data stream.
+//
+// If the Stdin io.Reader provided to remotecommand implements a WriteTo function (like bytes.Buffer does[1]),
+// io.Copy calls that method[2] to attempt to write the entire buffer to the stream in one call.
+// That results in an oversized call to spdystream.Stream#Write [3],
+// which results in a single oversized data frame[4] that is too large.
+//
+// [1] https://golang.org/pkg/bytes/#Buffer.WriteTo
+// [2] https://golang.org/pkg/io/#Copy
+// [3] https://github.com/kubernetes/kubernetes/blob/90295640ef87db9daa0144c5617afe889e7992b2/vendor/github.com/docker/spdystream/stream.go#L66-L73
+// [4] https://github.com/kubernetes/kubernetes/blob/90295640ef87db9daa0144c5617afe889e7992b2/vendor/github.com/docker/spdystream/spdy/write.go#L302-L304
+type readerWrapper struct {
+	reader io.Reader
+}
+
+func (r readerWrapper) Read(p []byte) (int, error) {
+	return r.reader.Read(p)
+}

vendor/k8s.io/client-go/tools/remotecommand/remotecommand.go

@@ -0,0 +1,142 @@
+/*
+Copyright 2015 The Kubernetes Authors.
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+*/
+
+package remotecommand
+
+import (
+	"fmt"
+	"io"
+	"net/http"
+	"net/url"
+
+	"k8s.io/klog"
+
+	"k8s.io/apimachinery/pkg/util/httpstream"
+	"k8s.io/apimachinery/pkg/util/remotecommand"
+	restclient "k8s.io/client-go/rest"
+	spdy "k8s.io/client-go/transport/spdy"
+)
+
+// StreamOptions holds information pertaining to the current streaming session:
+// input/output streams, if the client is requesting a TTY, and a terminal size queue to
+// support terminal resizing.
+type StreamOptions struct {
+	Stdin             io.Reader
+	Stdout            io.Writer
+	Stderr            io.Writer
+	Tty               bool
+	TerminalSizeQueue TerminalSizeQueue
+}
+
+// Executor is an interface for transporting shell-style streams.
+type Executor interface {
+	// Stream initiates the transport of the standard shell streams. It will transport any
+	// non-nil stream to a remote system, and return an error if a problem occurs. If tty
+	// is set, the stderr stream is not used (raw TTY manages stdout and stderr over the
+	// stdout stream).
+	Stream(options StreamOptions) error
+}
+
+type streamCreator interface {
+	CreateStream(headers http.Header) (httpstream.Stream, error)
+}
+
+type streamProtocolHandler interface {
+	stream(conn streamCreator) error
+}
+
+// streamExecutor handles transporting standard shell streams over an httpstream connection.
+type streamExecutor struct {
+	upgrader  spdy.Upgrader
+	transport http.RoundTripper
+
+	method    string
+	url       *url.URL
+	protocols []string
+}
+
+// NewSPDYExecutor connects to the provided server and upgrades the connection to
+// multiplexed bidirectional streams.
+func NewSPDYExecutor(config *restclient.Config, method string, url *url.URL) (Executor, error) {
+	wrapper, upgradeRoundTripper, err := spdy.RoundTripperFor(config)
+	if err != nil {
+		return nil, err
+	}
+	return NewSPDYExecutorForTransports(wrapper, upgradeRoundTripper, method, url)
+}
+
+// NewSPDYExecutorForTransports connects to the provided server using the given transport,
+// upgrades the response using the given upgrader to multiplexed bidirectional streams.
+func NewSPDYExecutorForTransports(transport http.RoundTripper, upgrader spdy.Upgrader, method string, url *url.URL) (Executor, error) {
+	return NewSPDYExecutorForProtocols(
+		transport, upgrader, method, url,
+		remotecommand.StreamProtocolV4Name,
+		remotecommand.StreamProtocolV3Name,
+		remotecommand.StreamProtocolV2Name,
+		remotecommand.StreamProtocolV1Name,
+	)
+}
+
+// NewSPDYExecutorForProtocols connects to the provided server and upgrades the connection to
+// multiplexed bidirectional streams using only the provided protocols. Exposed for testing, most
+// callers should use NewSPDYExecutor or NewSPDYExecutorForTransports.
+func NewSPDYExecutorForProtocols(transport http.RoundTripper, upgrader spdy.Upgrader, method string, url *url.URL, protocols ...string) (Executor, error) {
+	return &streamExecutor{
+		upgrader:  upgrader,
+		transport: transport,
+		method:    method,
+		url:       url,
+		protocols: protocols,
+	}, nil
+}
+
+// Stream opens a protocol streamer to the server and streams until a client closes
+// the connection or the server disconnects.
+func (e *streamExecutor) Stream(options StreamOptions) error {
+	req, err := http.NewRequest(e.method, e.url.String(), nil)
+	if err != nil {
+		return fmt.Errorf("error creating request: %v", err)
+	}
+
+	conn, protocol, err := spdy.Negotiate(
+		e.upgrader,
+		&http.Client{Transport: e.transport},
+		req,
+		e.protocols...,
+	)
+	if err != nil {
+		return err
+	}
+	defer conn.Close()
+
+	var streamer streamProtocolHandler
+
+	switch protocol {
+	case remotecommand.StreamProtocolV4Name:
+		streamer = newStreamProtocolV4(options)
+	case remotecommand.StreamProtocolV3Name:
+		streamer = newStreamProtocolV3(options)
+	case remotecommand.StreamProtocolV2Name:
+		streamer = newStreamProtocolV2(options)
+	case "":
+		klog.V(4).Infof("The server did not negotiate a streaming protocol version. Falling back to %s", remotecommand.StreamProtocolV1Name)
+		fallthrough
+	case remotecommand.StreamProtocolV1Name:
+		streamer = newStreamProtocolV1(options)
+	}
+
+	return streamer.stream(conn)
+}

vendor/k8s.io/client-go/tools/remotecommand/resize.go

@@ -0,0 +1,33 @@
+/*
+Copyright 2017 The Kubernetes Authors.
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+*/
+
+package remotecommand
+
+// TerminalSize and TerminalSizeQueue was a part of k8s.io/kubernetes/pkg/util/term
+// and were moved in order to decouple client from other term dependencies
+
+// TerminalSize represents the width and height of a terminal.
+type TerminalSize struct {
+	Width  uint16
+	Height uint16
+}
+
+// TerminalSizeQueue is capable of returning terminal resize events as they occur.
+type TerminalSizeQueue interface {
+	// Next returns the new terminal size after the terminal has been resized. It returns nil when
+	// monitoring has been stopped.
+	Next() *TerminalSize
+}

vendor/k8s.io/client-go/tools/remotecommand/v1.go

@@ -0,0 +1,160 @@
+/*
+Copyright 2015 The Kubernetes Authors.
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+*/
+
+package remotecommand
+
+import (
+	"fmt"
+	"io"
+	"io/ioutil"
+	"net/http"
+
+	"k8s.io/api/core/v1"
+	"k8s.io/apimachinery/pkg/util/httpstream"
+	"k8s.io/klog"
+)
+
+// streamProtocolV1 implements the first version of the streaming exec & attach
+// protocol. This version has some bugs, such as not being able to detect when
+// non-interactive stdin data has ended. See http://issues.k8s.io/13394 and
+// http://issues.k8s.io/13395 for more details.
+type streamProtocolV1 struct {
+	StreamOptions
+
+	errorStream  httpstream.Stream
+	remoteStdin  httpstream.Stream
+	remoteStdout httpstream.Stream
+	remoteStderr httpstream.Stream
+}
+
+var _ streamProtocolHandler = &streamProtocolV1{}
+
+func newStreamProtocolV1(options StreamOptions) streamProtocolHandler {
+	return &streamProtocolV1{
+		StreamOptions: options,
+	}
+}
+
+func (p *streamProtocolV1) stream(conn streamCreator) error {
+	doneChan := make(chan struct{}, 2)
+	errorChan := make(chan error)
+
+	cp := func(s string, dst io.Writer, src io.Reader) {
+		klog.V(6).Infof("Copying %s", s)
+		defer klog.V(6).Infof("Done copying %s", s)
+		if _, err := io.Copy(dst, src); err != nil && err != io.EOF {
+			klog.Errorf("Error copying %s: %v", s, err)
+		}
+		if s == v1.StreamTypeStdout || s == v1.StreamTypeStderr {
+			doneChan <- struct{}{}
+		}
+	}
+
+	// set up all the streams first
+	var err error
+	headers := http.Header{}
+	headers.Set(v1.StreamType, v1.StreamTypeError)
+	p.errorStream, err = conn.CreateStream(headers)
+	if err != nil {
+		return err
+	}
+	defer p.errorStream.Reset()
+
+	// Create all the streams first, then start the copy goroutines. The server doesn't start its copy
+	// goroutines until it's received all of the streams. If the client creates the stdin stream and
+	// immediately begins copying stdin data to the server, it's possible to overwhelm and wedge the
+	// spdy frame handler in the server so that it is full of unprocessed frames. The frames aren't
+	// getting processed because the server hasn't started its copying, and it won't do that until it
+	// gets all the streams. By creating all the streams first, we ensure that the server is ready to
+	// process data before the client starts sending any. See https://issues.k8s.io/16373 for more info.
+	if p.Stdin != nil {
+		headers.Set(v1.StreamType, v1.StreamTypeStdin)
+		p.remoteStdin, err = conn.CreateStream(headers)
+		if err != nil {
+			return err
+		}
+		defer p.remoteStdin.Reset()
+	}
+
+	if p.Stdout != nil {
+		headers.Set(v1.StreamType, v1.StreamTypeStdout)
+		p.remoteStdout, err = conn.CreateStream(headers)
+		if err != nil {
+			return err
+		}
+		defer p.remoteStdout.Reset()
+	}
+
+	if p.Stderr != nil && !p.Tty {
+		headers.Set(v1.StreamType, v1.StreamTypeStderr)
+		p.remoteStderr, err = conn.CreateStream(headers)
+		if err != nil {
+			return err
+		}
+		defer p.remoteStderr.Reset()
+	}
+
+	// now that all the streams have been created, proceed with reading & copying
+
+	// always read from errorStream
+	go func() {
+		message, err := ioutil.ReadAll(p.errorStream)
+		if err != nil && err != io.EOF {
+			errorChan <- fmt.Errorf("Error reading from error stream: %s", err)
+			return
+		}
+		if len(message) > 0 {
+			errorChan <- fmt.Errorf("Error executing remote command: %s", message)
+			return
+		}
+	}()
+
+	if p.Stdin != nil {
+		// TODO this goroutine will never exit cleanly (the io.Copy never unblocks)
+		// because stdin is not closed until the process exits. If we try to call
+		// stdin.Close(), it returns no error but doesn't unblock the copy. It will
+		// exit when the process exits, instead.
+		go cp(v1.StreamTypeStdin, p.remoteStdin, readerWrapper{p.Stdin})
+	}
+
+	waitCount := 0
+	completedStreams := 0
+
+	if p.Stdout != nil {
+		waitCount++
+		go cp(v1.StreamTypeStdout, p.Stdout, p.remoteStdout)
+	}
+
+	if p.Stderr != nil && !p.Tty {
+		waitCount++
+		go cp(v1.StreamTypeStderr, p.Stderr, p.remoteStderr)
+	}
+
+Loop:
+	for {
+		select {
+		case <-doneChan:
+			completedStreams++
+			if completedStreams == waitCount {
+				break Loop
+			}
+		case err := <-errorChan:
+			return err
+		}
+	}
+
+	return nil
+}

vendor/k8s.io/client-go/tools/remotecommand/v2.go

@@ -0,0 +1,195 @@
+/*
+Copyright 2015 The Kubernetes Authors.
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+*/
+
+package remotecommand
+
+import (
+	"fmt"
+	"io"
+	"io/ioutil"
+	"net/http"
+	"sync"
+
+	"k8s.io/api/core/v1"
+	"k8s.io/apimachinery/pkg/util/runtime"
+)
+
+// streamProtocolV2 implements version 2 of the streaming protocol for attach
+// and exec. The original streaming protocol was metav1. As a result, this
+// version is referred to as version 2, even though it is the first actual
+// numbered version.
+type streamProtocolV2 struct {
+	StreamOptions
+
+	errorStream  io.Reader
+	remoteStdin  io.ReadWriteCloser
+	remoteStdout io.Reader
+	remoteStderr io.Reader
+}
+
+var _ streamProtocolHandler = &streamProtocolV2{}
+
+func newStreamProtocolV2(options StreamOptions) streamProtocolHandler {
+	return &streamProtocolV2{
+		StreamOptions: options,
+	}
+}
+
+func (p *streamProtocolV2) createStreams(conn streamCreator) error {
+	var err error
+	headers := http.Header{}
+
+	// set up error stream
+	headers.Set(v1.StreamType, v1.StreamTypeError)
+	p.errorStream, err = conn.CreateStream(headers)
+	if err != nil {
+		return err
+	}
+
+	// set up stdin stream
+	if p.Stdin != nil {
+		headers.Set(v1.StreamType, v1.StreamTypeStdin)
+		p.remoteStdin, err = conn.CreateStream(headers)
+		if err != nil {
+			return err
+		}
+	}
+
+	// set up stdout stream
+	if p.Stdout != nil {
+		headers.Set(v1.StreamType, v1.StreamTypeStdout)
+		p.remoteStdout, err = conn.CreateStream(headers)
+		if err != nil {
+			return err
+		}
+	}
+
+	// set up stderr stream
+	if p.Stderr != nil && !p.Tty {
+		headers.Set(v1.StreamType, v1.StreamTypeStderr)
+		p.remoteStderr, err = conn.CreateStream(headers)
+		if err != nil {
+			return err
+		}
+	}
+	return nil
+}
+
+func (p *streamProtocolV2) copyStdin() {
+	if p.Stdin != nil {
+		var once sync.Once
+
+		// copy from client's stdin to container's stdin
+		go func() {
+			defer runtime.HandleCrash()
+
+			// if p.stdin is noninteractive, p.g. `echo abc | kubectl exec -i <pod> -- cat`, make sure
+			// we close remoteStdin as soon as the copy from p.stdin to remoteStdin finishes. Otherwise
+			// the executed command will remain running.
+			defer once.Do(func() { p.remoteStdin.Close() })
+
+			if _, err := io.Copy(p.remoteStdin, readerWrapper{p.Stdin}); err != nil {
+				runtime.HandleError(err)
+			}
+		}()
+
+		// read from remoteStdin until the stream is closed. this is essential to
+		// be able to exit interactive sessions cleanly and not leak goroutines or
+		// hang the client's terminal.
+		//
+		// TODO we aren't using go-dockerclient any more; revisit this to determine if it's still
+		// required by engine-api.
+		//
+		// go-dockerclient's current hijack implementation
+		// (https://github.com/fsouza/go-dockerclient/blob/89f3d56d93788dfe85f864a44f85d9738fca0670/client.go#L564)
+		// waits for all three streams (stdin/stdout/stderr) to finish copying
+		// before returning. When hijack finishes copying stdout/stderr, it calls
+		// Close() on its side of remoteStdin, which allows this copy to complete.
+		// When that happens, we must Close() on our side of remoteStdin, to
+		// allow the copy in hijack to complete, and hijack to return.
+		go func() {
+			defer runtime.HandleCrash()
+			defer once.Do(func() { p.remoteStdin.Close() })
+
+			// this "copy" doesn't actually read anything - it's just here to wait for
+			// the server to close remoteStdin.
+			if _, err := io.Copy(ioutil.Discard, p.remoteStdin); err != nil {
+				runtime.HandleError(err)
+			}
+		}()
+	}
+}
+
+func (p *streamProtocolV2) copyStdout(wg *sync.WaitGroup) {
+	if p.Stdout == nil {
+		return
+	}
+
+	wg.Add(1)
+	go func() {
+		defer runtime.HandleCrash()
+		defer wg.Done()
+
+		if _, err := io.Copy(p.Stdout, p.remoteStdout); err != nil {
+			runtime.HandleError(err)
+		}
+	}()
+}
+
+func (p *streamProtocolV2) copyStderr(wg *sync.WaitGroup) {
+	if p.Stderr == nil || p.Tty {
+		return
+	}
+
+	wg.Add(1)
+	go func() {
+		defer runtime.HandleCrash()
+		defer wg.Done()
+
+		if _, err := io.Copy(p.Stderr, p.remoteStderr); err != nil {
+			runtime.HandleError(err)
+		}
+	}()
+}
+
+func (p *streamProtocolV2) stream(conn streamCreator) error {
+	if err := p.createStreams(conn); err != nil {
+		return err
+	}
+
+	// now that all the streams have been created, proceed with reading & copying
+
+	errorChan := watchErrorStream(p.errorStream, &errorDecoderV2{})
+
+	p.copyStdin()
+
+	var wg sync.WaitGroup
+	p.copyStdout(&wg)
+	p.copyStderr(&wg)
+
+	// we're waiting for stdout/stderr to finish copying
+	wg.Wait()
+
+	// waits for errorStream to finish reading with an error or nil
+	return <-errorChan
+}
+
+// errorDecoderV2 interprets the error channel data as plain text.
+type errorDecoderV2 struct{}
+
+func (d *errorDecoderV2) decode(message []byte) error {
+	return fmt.Errorf("error executing remote command: %s", message)
+}

vendor/k8s.io/client-go/tools/remotecommand/v3.go

@@ -0,0 +1,111 @@
+/*
+Copyright 2016 The Kubernetes Authors.
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+*/
+
+package remotecommand
+
+import (
+	"encoding/json"
+	"io"
+	"net/http"
+	"sync"
+
+	"k8s.io/api/core/v1"
+	"k8s.io/apimachinery/pkg/util/runtime"
+)
+
+// streamProtocolV3 implements version 3 of the streaming protocol for attach
+// and exec. This version adds support for resizing the container's terminal.
+type streamProtocolV3 struct {
+	*streamProtocolV2
+
+	resizeStream io.Writer
+}
+
+var _ streamProtocolHandler = &streamProtocolV3{}
+
+func newStreamProtocolV3(options StreamOptions) streamProtocolHandler {
+	return &streamProtocolV3{
+		streamProtocolV2: newStreamProtocolV2(options).(*streamProtocolV2),
+	}
+}
+
+func (p *streamProtocolV3) createStreams(conn streamCreator) error {
+	// set up the streams from v2
+	if err := p.streamProtocolV2.createStreams(conn); err != nil {
+		return err
+	}
+
+	// set up resize stream
+	if p.Tty {
+		headers := http.Header{}
+		headers.Set(v1.StreamType, v1.StreamTypeResize)
+		var err error
+		p.resizeStream, err = conn.CreateStream(headers)
+		if err != nil {
+			return err
+		}
+	}
+
+	return nil
+}
+
+func (p *streamProtocolV3) handleResizes() {
+	if p.resizeStream == nil || p.TerminalSizeQueue == nil {
+		return
+	}
+	go func() {
+		defer runtime.HandleCrash()
+
+		encoder := json.NewEncoder(p.resizeStream)
+		for {
+			size := p.TerminalSizeQueue.Next()
+			if size == nil {
+				return
+			}
+			if err := encoder.Encode(&size); err != nil {
+				runtime.HandleError(err)
+			}
+		}
+	}()
+}
+
+func (p *streamProtocolV3) stream(conn streamCreator) error {
+	if err := p.createStreams(conn); err != nil {
+		return err
+	}
+
+	// now that all the streams have been created, proceed with reading & copying
+
+	errorChan := watchErrorStream(p.errorStream, &errorDecoderV3{})
+
+	p.handleResizes()
+
+	p.copyStdin()
+
+	var wg sync.WaitGroup
+	p.copyStdout(&wg)
+	p.copyStderr(&wg)
+
+	// we're waiting for stdout/stderr to finish copying
+	wg.Wait()
+
+	// waits for errorStream to finish reading with an error or nil
+	return <-errorChan
+}
+
+type errorDecoderV3 struct {
+	errorDecoderV2
+}

vendor/k8s.io/client-go/tools/remotecommand/v4.go

@@ -0,0 +1,119 @@
+/*
+Copyright 2016 The Kubernetes Authors.
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+*/
+
+package remotecommand
+
+import (
+	"encoding/json"
+	"errors"
+	"fmt"
+	"strconv"
+	"sync"
+
+	metav1 "k8s.io/apimachinery/pkg/apis/meta/v1"
+	"k8s.io/apimachinery/pkg/util/remotecommand"
+	"k8s.io/client-go/util/exec"
+)
+
+// streamProtocolV4 implements version 4 of the streaming protocol for attach
+// and exec. This version adds support for exit codes on the error stream through
+// the use of metav1.Status instead of plain text messages.
+type streamProtocolV4 struct {
+	*streamProtocolV3
+}
+
+var _ streamProtocolHandler = &streamProtocolV4{}
+
+func newStreamProtocolV4(options StreamOptions) streamProtocolHandler {
+	return &streamProtocolV4{
+		streamProtocolV3: newStreamProtocolV3(options).(*streamProtocolV3),
+	}
+}
+
+func (p *streamProtocolV4) createStreams(conn streamCreator) error {
+	return p.streamProtocolV3.createStreams(conn)
+}
+
+func (p *streamProtocolV4) handleResizes() {
+	p.streamProtocolV3.handleResizes()
+}
+
+func (p *streamProtocolV4) stream(conn streamCreator) error {
+	if err := p.createStreams(conn); err != nil {
+		return err
+	}
+
+	// now that all the streams have been created, proceed with reading & copying
+
+	errorChan := watchErrorStream(p.errorStream, &errorDecoderV4{})
+
+	p.handleResizes()
+
+	p.copyStdin()
+
+	var wg sync.WaitGroup
+	p.copyStdout(&wg)
+	p.copyStderr(&wg)
+
+	// we're waiting for stdout/stderr to finish copying
+	wg.Wait()
+
+	// waits for errorStream to finish reading with an error or nil
+	return <-errorChan
+}
+
+// errorDecoderV4 interprets the json-marshaled metav1.Status on the error channel
+// and creates an exec.ExitError from it.
+type errorDecoderV4 struct{}
+
+func (d *errorDecoderV4) decode(message []byte) error {
+	status := metav1.Status{}
+	err := json.Unmarshal(message, &status)
+	if err != nil {
+		return fmt.Errorf("error stream protocol error: %v in %q", err, string(message))
+	}
+	switch status.Status {
+	case metav1.StatusSuccess:
+		return nil
+	case metav1.StatusFailure:
+		if status.Reason == remotecommand.NonZeroExitCodeReason {
+			if status.Details == nil {
+				return errors.New("error stream protocol error: details must be set")
+			}
+			for i := range status.Details.Causes {
+				c := &status.Details.Causes[i]
+				if c.Type != remotecommand.ExitCodeCauseType {
+					continue
+				}
+
+				rc, err := strconv.ParseUint(c.Message, 10, 8)
+				if err != nil {
+					return fmt.Errorf("error stream protocol error: invalid exit code value %q", c.Message)
+				}
+				return exec.CodeExitError{
+					Err:  fmt.Errorf("command terminated with exit code %d", rc),
+					Code: int(rc),
+				}
+			}
+
+			return fmt.Errorf("error stream protocol error: no %s cause given", remotecommand.ExitCodeCauseType)
+		}
+	default:
+		return errors.New("error stream protocol error: unknown error")
+	}
+
+	return fmt.Errorf(status.Message)
+}