Migrate from dep to go module

Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>

vendor/k8s.io/api/networking/v1beta1/generated.proto

@@ -0,0 +1,186 @@
+/*
+Copyright The Kubernetes Authors.
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+*/
+
+
+// This file was autogenerated by go-to-protobuf. Do not edit it manually!
+
+syntax = 'proto2';
+
+package k8s.io.api.networking.v1beta1;
+
+import "k8s.io/api/core/v1/generated.proto";
+import "k8s.io/apimachinery/pkg/apis/meta/v1/generated.proto";
+import "k8s.io/apimachinery/pkg/runtime/generated.proto";
+import "k8s.io/apimachinery/pkg/runtime/schema/generated.proto";
+import "k8s.io/apimachinery/pkg/util/intstr/generated.proto";
+
+// Package-wide variables from generator "generated".
+option go_package = "v1beta1";
+
+// HTTPIngressPath associates a path regex with a backend. Incoming urls matching
+// the path are forwarded to the backend.
+message HTTPIngressPath {
+  // Path is an extended POSIX regex as defined by IEEE Std 1003.1,
+  // (i.e this follows the egrep/unix syntax, not the perl syntax)
+  // matched against the path of an incoming request. Currently it can
+  // contain characters disallowed from the conventional "path"
+  // part of a URL as defined by RFC 3986. Paths must begin with
+  // a '/'. If unspecified, the path defaults to a catch all sending
+  // traffic to the backend.
+  // +optional
+  optional string path = 1;
+
+  // Backend defines the referenced service endpoint to which the traffic
+  // will be forwarded to.
+  optional IngressBackend backend = 2;
+}
+
+// HTTPIngressRuleValue is a list of http selectors pointing to backends.
+// In the example: http://<host>/<path>?<searchpart> -> backend where
+// where parts of the url correspond to RFC 3986, this resource will be used
+// to match against everything after the last '/' and before the first '?'
+// or '#'.
+message HTTPIngressRuleValue {
+  // A collection of paths that map requests to backends.
+  repeated HTTPIngressPath paths = 1;
+}
+
+// Ingress is a collection of rules that allow inbound connections to reach the
+// endpoints defined by a backend. An Ingress can be configured to give services
+// externally-reachable urls, load balance traffic, terminate SSL, offer name
+// based virtual hosting etc.
+message Ingress {
+  // Standard object's metadata.
+  // More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
+  // +optional
+  optional k8s.io.apimachinery.pkg.apis.meta.v1.ObjectMeta metadata = 1;
+
+  // Spec is the desired state of the Ingress.
+  // More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
+  // +optional
+  optional IngressSpec spec = 2;
+
+  // Status is the current state of the Ingress.
+  // More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
+  // +optional
+  optional IngressStatus status = 3;
+}
+
+// IngressBackend describes all endpoints for a given service and port.
+message IngressBackend {
+  // Specifies the name of the referenced service.
+  optional string serviceName = 1;
+
+  // Specifies the port of the referenced service.
+  optional k8s.io.apimachinery.pkg.util.intstr.IntOrString servicePort = 2;
+}
+
+// IngressList is a collection of Ingress.
+message IngressList {
+  // Standard object's metadata.
+  // More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
+  // +optional
+  optional k8s.io.apimachinery.pkg.apis.meta.v1.ListMeta metadata = 1;
+
+  // Items is the list of Ingress.
+  repeated Ingress items = 2;
+}
+
+// IngressRule represents the rules mapping the paths under a specified host to
+// the related backend services. Incoming requests are first evaluated for a host
+// match, then routed to the backend associated with the matching IngressRuleValue.
+message IngressRule {
+  // Host is the fully qualified domain name of a network host, as defined
+  // by RFC 3986. Note the following deviations from the "host" part of the
+  // URI as defined in the RFC:
+  // 1. IPs are not allowed. Currently an IngressRuleValue can only apply to the
+  // 	  IP in the Spec of the parent Ingress.
+  // 2. The `:` delimiter is not respected because ports are not allowed.
+  // 	  Currently the port of an Ingress is implicitly :80 for http and
+  // 	  :443 for https.
+  // Both these may change in the future.
+  // Incoming requests are matched against the host before the IngressRuleValue.
+  // If the host is unspecified, the Ingress routes all traffic based on the
+  // specified IngressRuleValue.
+  // +optional
+  optional string host = 1;
+
+  // IngressRuleValue represents a rule to route requests for this IngressRule.
+  // If unspecified, the rule defaults to a http catch-all. Whether that sends
+  // just traffic matching the host to the default backend or all traffic to the
+  // default backend, is left to the controller fulfilling the Ingress. Http is
+  // currently the only supported IngressRuleValue.
+  // +optional
+  optional IngressRuleValue ingressRuleValue = 2;
+}
+
+// IngressRuleValue represents a rule to apply against incoming requests. If the
+// rule is satisfied, the request is routed to the specified backend. Currently
+// mixing different types of rules in a single Ingress is disallowed, so exactly
+// one of the following must be set.
+message IngressRuleValue {
+  // +optional
+  optional HTTPIngressRuleValue http = 1;
+}
+
+// IngressSpec describes the Ingress the user wishes to exist.
+message IngressSpec {
+  // A default backend capable of servicing requests that don't match any
+  // rule. At least one of 'backend' or 'rules' must be specified. This field
+  // is optional to allow the loadbalancer controller or defaulting logic to
+  // specify a global default.
+  // +optional
+  optional IngressBackend backend = 1;
+
+  // TLS configuration. Currently the Ingress only supports a single TLS
+  // port, 443. If multiple members of this list specify different hosts, they
+  // will be multiplexed on the same port according to the hostname specified
+  // through the SNI TLS extension, if the ingress controller fulfilling the
+  // ingress supports SNI.
+  // +optional
+  repeated IngressTLS tls = 2;
+
+  // A list of host rules used to configure the Ingress. If unspecified, or
+  // no rule matches, all traffic is sent to the default backend.
+  // +optional
+  repeated IngressRule rules = 3;
+}
+
+// IngressStatus describe the current state of the Ingress.
+message IngressStatus {
+  // LoadBalancer contains the current status of the load-balancer.
+  // +optional
+  optional k8s.io.api.core.v1.LoadBalancerStatus loadBalancer = 1;
+}
+
+// IngressTLS describes the transport layer security associated with an Ingress.
+message IngressTLS {
+  // Hosts are a list of hosts included in the TLS certificate. The values in
+  // this list must match the name/s used in the tlsSecret. Defaults to the
+  // wildcard host setting for the loadbalancer controller fulfilling this
+  // Ingress, if left unspecified.
+  // +optional
+  repeated string hosts = 1;
+
+  // SecretName is the name of the secret used to terminate SSL traffic on 443.
+  // Field is left optional to allow SSL routing based on SNI hostname alone.
+  // If the SNI host in a listener conflicts with the "Host" header field used
+  // by an IngressRule, the SNI host is used for termination and value of the
+  // Host header is used for routing.
+  // +optional
+  optional string secretName = 2;
+}
+