blkdiscard cmd discards all data on the block device which
is not desired. Hence, return unimplemented code if the
volume access mode is block.
Signed-off-by: Rakshith R <rar@redhat.com>
(cherry picked from commit 3a64ee48c3)
At present we are node staging with worldwide permissions which is
not correct. We should allow the CO to take care of it and make
the decision. This commit also remove `fuseMountOptions` and
`KernelMountOptions` as they are no longer needed
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
(cherry picked from commit 8f6a7da538)
the omap is stored with the requested
snapshot name not with the subvolume
snapshotname. This fix uses the correct
snapshot request name to cleanup the omap
once the subvolume snapshot is deleted.
fixes: #2832
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
(cherry picked from commit 2943555904)
When a tenant configures `vaultNamespace` in their own ConfigMap, it is
not applied to the Vault configuration, unless `vaultAuthNamespace` is
set as well. This is unexpected, as the `vaultAuthNamespace` usually is
something configured globally, and not per tenant.
The `vaultAuthNamespace` is an advanced option, that is often not needed
to be configured. Only when tenants have to configure their own
`vaultNamespace`, it is possible that they need to use a different
`vaultAuthNamespace`. The default for the `vaultAuthNamespace` is now
the `vaultNamespace` value from the global configuration. Tenants can
still set it to something else in their own ConfigMap if needed.
Note that Hashicorp Vault Namespaces are only functional in the
Enterprise version of the product. Therefor this can not be tested in
the Ceph-CSI e2e with the Open Source version of Vault.
Fixes: https://bugzilla.redhat.com/2050056
Reported-by: Rachael George <rgeorge@redhat.com>
Signed-off-by: Niels de Vos <ndevos@redhat.com>
(cherry picked from commit f6894909d7)
As we are using optional additional auth data while wrapping
the DEK, we have to send the same additionally while unwrapping.
Error:
```
failed to unwrap the DEK: kp.Error: ..(INVALID_FIELD_ERR)',
reasons='[INVALID_FIELD_ERR: The field `ciphertext` must be: the
original base64 encoded ciphertext from the wrap operation
```
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
(cherry picked from commit 1c3baa0722)
To be consistent with other components and also to explictly
state it belong to `ibm keyprotect` service introducing this
change
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
(cherry picked from commit f822600689)
considering the pod has run as normal user, the fsgroup has also
set to the same.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
(cherry picked from commit 7ff048bf1e)
currently we are overriding the permission to `0o777` at time of node
stage which is not the correct action. That said, this permission
change causes an extra permission correction at time of nodestaging
by the CO while the FSGROUP change policy has been set to
`OnRootMismatch`.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
(cherry picked from commit bf4ba0ec84)
During CreateVolume from snapshot/volume,
its difficult to identify if the clone is
failed and a new clone is created. In case
of clone failure logging the error message
for better debugging.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
(cherry picked from commit 2daf2f9f0c)
Currently, as a workaround, we are calling
the resize volume on the cloned, restore volumes
to adjust the cloned, restored volumes.
With this fix, we are calling the resize volume
only if there is a size mismatch with requested
and the volume from which the new volume needs
to be created.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
SINGLE_NODE_WRITER capability ambiguity has been fixed in csi spec v1.5
which allows the SP drivers to declare more granular WRITE capability in form
of SINGLE_NODE_SINGLE_WRITER or SINGLE_NODE_MULTI_WRITER.
These are not really new capabilities rather capabilities introduced to
get the desired functionality from CO side based on the capabilities SP
driver support for various CSI operations, this new capabilities also help
to address new access mode RWOP (readwriteoncepod).
This commit adds a helper function which identity the request is of
multiwriter mode and also validates whether it is filesystem mode or
block mode. Based on the inspection it fails to allow multi write
requests for filesystem mode and only allow multi write request against
block mode.
This commit also adds unit tests for isMultiWriterBlock function which
validates various accesstypes and accessmodes.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
SINGLE_NODE_WRITER capability ambiguity has been fixed in csi spec v1.5
which allows the SP drivers to declare more granular WRITE capability.
These are not really new capabilities rather capabilities introduced to
get the desired functionality from CO side based on the capabilities SP
driver support for various CSI operations.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
This commit adds optional BaseURL and TokenURL configuration to
key protect/hpcs configuration and client connections, if not
provided default values are used.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
implement UnfenceClusterNetwork grpc call
which allows to unblock the access to a
CIDR block by removing it from network fence.
Signed-off-by: Yug Gupta <yuggupta27@gmail.com>
implement FenceClusterNetwork grpc call which
allows to blocks access to a CIDR block by
creating a network fence.
Signed-off-by: Yug Gupta <yuggupta27@gmail.com>
Convert the CIDR block into a range of IPs,
and then add network fencing via "ceph osd blocklist"
for each IP in that range.
Signed-off-by: Yug Gupta <yuggupta27@gmail.com>
This commit removes rbdVol.getTrashPath() function
since it is no longer being used due to introduction
of go-ceph rbd admin task api for deletion.
Signed-off-by: Rakshith R <rar@redhat.com>
With introduction of go-ceph rbd admin task api, credentials are
no longer required to be passed as cli cmd is not invoked.
Signed-off-by: Rakshith R <rar@redhat.com>
This commit removes `rv.Connect(cr)` since the rbdVolume should
have an active connection in this stage of the function call.
`rv.getCloneDepth(ctx)` will work after a connect to the cluster.
Signed-off-by: Rakshith R <rar@redhat.com>
This commit adds support to go-ceph rbd task api
`trash remove` and `flatten` instead of using cli
cmds.
Fixes: #2186
Signed-off-by: Rakshith R <rar@redhat.com>
considering IBM has different crypto services (ex: SKLM) in place, its
good to keep the configmap key names with below format
`IBM_KP_...` instead of `KP_..`
so that in future, if we add more crypto services from IBM we can keep
similar schema specific to that specific service from IBM.
Ex: `IBM_SKLM_...`
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
The CSI Controller (provisioner) can call `rbd sparsify` to reduce the
space consumption of the volume.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
use ExecCommandWithTimeout with timeout
of 1 minute for the promote operation.
If the command doesnot returns error/response
in 1 minute the process will be killed
and error will be returned to the user.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
added ExecCommandWithTimeout helper function
to execute the commands with the timeout option,
if the command does not return any response with
in the timeout time the process will be terminated
and error will be returned back to the user.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
after creating the rbd image log the image
details corresponding for the request along
with the request name.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
as getImageInfo is already called inside
cloneRbdImageFromSnapshot function right
after creating the clone. remove the extra
API call to get the details again.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
after creating the clone get the current
image details like size, creationTime,
imageFeatures etc from the ceph cluster.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
moved ParentName, ParentPool and ImageFeatureSet
fields to the rbdImage struct as these are the
first citizens on the rbdImage.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
If the volume with a bigger size is created
from a snapshot or from another volume we
need to exapand the filesystem also in the
csidriver as nodeExpand request is not triggered
for this one, During NodeStageVolume we can
expand the filesystem by checking filesystem
needs expansion or not.
If its a encrypted device, check the device
size of rbd device and the LUKS device if required
the device will be expanded before
expanding the filesystem.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
If the requested volume size is greater than
the snapshot size, resize the cloned volume
after creating a clone from a snapshot.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
If the requested volume size is greater than
the parent volume size, resize the cloned volume
after creating a final clone from a parent volume.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
added a check to consider ErrImageNotFound error
during DeleteSnapshot operation, if the error
is ErrImageNotFound we need to ensure that image
is removed from the trash and also the rados
OMAP data is removed.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
we need actual size of the rbdVolume
created for the snapshot, as we are not
storing the size of the snapshot in OMAP
we need to fetch the size from ceph cluster
and update the same on rbdSnapshot struct.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
as we are moving the VolSize to rbdImage struct
we should reuse the same instead of maintaining
one more field in rbdSnapshot struct.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
move the Volsize to the rbdImage struct
as size is more applicable for rbdImage
as rbdImage is used for both rbdVolume
and rbdSnapshot.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
as we are no longer supporting the v1.x
version of cephcsi. removing the json tag
used to store rbd volume details in configmap.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
when doing the internal operation to get the
latest details the rbd image size is also getting
updated and this will update the volume size also
without actual requested size we cannot do the
resize operation for bigger clones. This commit
adds a new field called RequestedVolSize to rbdVolume
struct to hold the user requested size.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
added a new helper function called cleanupThickClone
to cleanup the snapshot and clone if the thick
provisioning is not fully completed.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
