OIDC token file path has been modified from
`/var/run/secrets/token` to `/run/secrets/tokens`.
This has been done to ensure compliance with
FHS 3.0.
refer:
https://refspecs.linuxfoundation.org/FHS_3.0/fhs/ch05s13.html
Signed-off-by: Rakshith R <rar@redhat.com>
With Amazon STS and kubernetes cluster is configured with
OIDC identity provider, credentials to access Amazon KMS
can be fetched using oidc-token(serviceaccount token).
Each tenant/namespace needs to create a secret with aws region,
role and CMK ARN.
Ceph-CSI will assume the given role with oidc token and access
aws KMS, with given CMK to encrypt/decrypt DEK which will stored
in the image metdata.
Refer: https://docs.aws.amazon.com/STS/latest/APIReference/welcome.htmlResolves: #2879
Signed-off-by: Rakshith R <rar@redhat.com>
Mounts managed by ceph-fuse may get corrupted by e.g. the ceph-fuse process
exiting abruptly, or its parent container being terminated, taking down its
child processes with it.
This commit adds checks to NodeStageVolume and NodePublishVolume procedures
to detect whether a mountpoint in staging_target_path and/or target_path is
corrupted, and remount is performed if corruption is detected.
Signed-off-by: Robert Vasek <robert.vasek@cern.ch>
The CentOS 8 repository for Apache Arrow has been removed. This causes
container-image builds fail with the following error:
Errors during downloading metadata for repository 'apache-arrow-centos':
- Status code: 404 for https://apache.jfrog.io/artifactory/arrow/centos/8/x86_64/repodata/repomd.xml (IP: 54.190.66.70)
Error: Failed to download metadata for repo 'apache-arrow-centos': Cannot download repomd.xml: Cannot download repodata/repomd.xml: All mirrors were tried
The Ceph base image has `arrow/centos/8` configured, maybe Apache Arrow
offers a CentOS Stream 8 repository now? Once the Ceph container-image
has been updated, the repository can be enabled again.
Ceph-CSI does not depend on Apache Arrow, so there is no functional
change by disabling the repository.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
updating external resizer image version
from 1.3.0 to latest available release i.e
1.4.0
1.4.0 changelog link
https://github.com/kubernetes-csi/
external-resizer/blob/master/CHANGELOG/CHANGELOG-1.4.md
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
This commit updates sidecars to the latest available version
which is compatible with kubernetes 1.23 and csi spec 1.5
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
Deployments place all sockets for communicating with CSI components in
the shared `/csi` directory. The CSI-Addons socket was introduced
recently, but not configured to be in the same location (by default
placed in `/tmp`).
Signed-off-by: Niels de Vos <ndevos@redhat.com>
The generated files under the deploy/ directory contain an empty YAML
document that may cause confusion for some versions of kubectl. Dropping
the unneeded `---` start of the file for the header should make parsing
of the deployment artifacts a little less error prone.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
This initial version of yamlgen generates deploy/scc.yaml based on the
deployment artifact that is provided by the new api/deploy/ocp package.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
cephfs deployment doesnot need extra permission like
privileged,Capabilities and remove unwanted volumes.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
rbd deployment doesnot need extra permission like
privileged,Capabilities and remove unwanted volumes.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
we dont need securityContext for the rbd provisioner
pod as its not doing any special operations like map
,unmap selinux etc.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
we dont need securityContext for the cephfs provisioner
pod as its not doing any special operations like mounts,
selinux etc.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Problem:
--------
1. rbd-nbd by default logs to /var/log/ceph/ceph-client.admin.log,
Unfortunately, container doesn't have /var/log/ceph directory hence
rbd-nbd is not logging now.
2. Rbd-nbd logs are not persistent across nodeplugin restarts.
Solution:
--------
Provide a host path so that log directory is made available, and the
logs persist on the hostnode across container restarts.
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
- mount host's /etc/selinux in node plugins
- process mount options in all code paths for cephfs volume options
Signed-off-by: Alexandre Lossent <alexandre.lossent@cern.ch>
This change resolves a typo for installing the CSIDriver
resource in Kubernetes clusters before 1.18,
where the apiVersion is incorrect.
See also:
https://kubernetes-csi.github.io/docs/csi-driver-object.html
[ndevos: replace v1betav1 in examples with v1beta1]
Signed-off-by: Thomas Kooi <t.j.kooi@avisi.nl>
Problem:
-------
For rbd nbd userspace mounter backends, after a restart of the nodeplugin
all the mounts will start seeing IO errors. This is because, for rbd-nbd
backends there will be a userspace mount daemon running per volume, post
restart of the nodeplugin pod, there is no way to restore the daemons
back to life.
Solution:
--------
The volume healer is a one-time activity that is triggered at the startup
time of the rbd nodeplugin. It navigates through the list of volume
attachments on the node and acts accordingly.
For now, it is limited to nbd type storage only, but it is flexible and
can be extended in the future for other backend types as needed.
From a few feets above:
This solves a severe problem for nbd backed csi volumes. The healer while
going through the list of volume attachments on the node, if finds the
volume is in attached state and is of type nbd, then it will attempt to
fix the rbd-nbd volumes by sending a NodeStageVolume request with the
required volume attributes like secrets, device name, image attributes,
and etc.. which will finally help start the required rbd-nbd daemons in
the nodeplugin csi-rbdplugin container. This will allow reattaching the
backend images with the right nbd device, thus allowing the applications
to perform IO without any interruptions even after a nodeplugin restart.
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Nodeplugin needs below cluster roles:
persistentvolumes: get
volumeattachments: list, get
These additional permissions are needed by the volume healer. Volume healer
aims at fixing the volume health issues at the very startup time of the
nodeplugin. As part of its operations, volume healer has to run through
the list of volume attachments and understand details about each
persistentvolume.
The later commits will use these additional cluster roles.
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
The provisioner and node-plugin have the capability to connect to
Hashicorp Vault with a ServiceAccount from the Namespace where the PVC
is created. This requires permissions to read the contents of the
ServiceAccount from an other Namespace than where Ceph-CSI is deployed.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
csidriver object can be created on the kubernetes
for below reason.
If a CSI driver creates a CSIDriver object,
Kubernetes users can easily discover the CSI
Drivers installed on their cluster
(simply by issuing kubectl get CSIDriver)
Ref: https://kubernetes-csi.github.io/docs/csi-driver-object.html#what-is-the-csidriver-object
attachRequired is always required to be set to
true to avoid issue on RWO PVC.
more details about it at https://github.com/rook/rook/pull/4332
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
use the latest version of csi-snapshotter sidecar image at the
provisioner templates
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
set system-cluster-critical priorityclass on
provisioner pods. the system-cluster-critical is
having lowest priority compared to node-critical.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
set system-node-critical priority on the plugin
pods, as its the highest priority and this need to
be applied on plugin pods as its critical for
storage in cluster.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
as provisioner need to get the configmap from
different namespace to check tenant configuration.
added the clusterrole get access for the same.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Tenants can have their own ConfigMap that contains connection parameters
to the Vault Service where the PV encyption keys are located. It is
possible for a Tenant to use a different Vault Service than the one
configured by the Storage Admin who deployed Ceph-CSI.
For this, the node-plugin needs to be able to read the ConfigMap from
the Tenants namespace.
See-also: docs/design/proposals/encryption-with-vault-tokens.md
Signed-off-by: Niels de Vos <ndevos@redhat.com>
if the kms encryption configmap is not mounted
as a volume to the CSI pods, add the code to
read the configuration from the kubernetes. Later
the code to fetch the configmap will be moved to
the new sidecar which is will talk to respective
CO to fetch the encryption configurations.
The k8s configmap uses the standard vault spefic
names to add the configurations. this will be converted
back to the CSI configurations.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
In order to fetch the Kubernetes Secret with the Vault Token for a
Tenant, the ClusterRole needs to allow reading Secrets from all
Kubernetes Namespaces (each Tenant has their own Namespace).
Signed-off-by: Niels de Vos <ndevos@redhat.com>
This argument in csi-provisioner sidecar allows us to receive pv/pvc
name/namespace metadata in the createVolume() request.
For ex:
csi.storage.k8s.io/pvc/name
csi.storage.k8s.io/pvc/namespace
csi.storage.k8s.io/pv/name
This is a useful information which can be used depend on the use case we
have at our driver. The features like vault token enablement for multi
tenancy, RBD mirroring ..etc can consume this based on the need.
Refer: #1305
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
Signed-off-by: Niels de Vos <ndevos@redhat.com>
