Some parts of the Context() seem to get executed, even when BeforeEach()
did a Skip() for the test. By adding a return inside the Context(), the
tests should not get executed at all.
This was noticed in a failed test, where upgrade was running, eventhough
the job was executed as a nornal non-upgrade one.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
The current version of Mergify provides a `requeue` command in addition
to `refresh`. After a CI job failed, the PR needs to be re-added to the
queue, so the `requeue` command is more appropriate.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
This commit change the image registry URL for sidecars in the
deployment from `k8s.gcr.io` to `registry.k8s.io` as
the migration is happening from former to the latter. This commit
also correct the e2e readme for the change.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
This commit change the image registry URL for sidecars in the
NFS deployment from `k8s.gcr.io` to `registry.k8s.io` as
the migration is happening from former to the latter.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
This commit change the image registry URL for sidecars in the
RBD deployment from `k8s.gcr.io` to `registry.k8s.io` as
the migration is happening from former to the latter.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
This commit change the image registry URL for sidecars in the
CephFS deployment from `k8s.gcr.io` to `registry.k8s.io` as
the migration is happening from former to the latter.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
as same host directory is not shared between
the cephfs and the rbd plugin pod. we need
to keep the netNamespaceFilePath separately
for both cephfs and rbd. CephFS plugin will
use this path to execute mount -t commands.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
As radosNamespace is more specific to
RBD not the general ceph configuration. Now
we introduced a new RBD section for RBD specific
options, Moving the radosNamespace to RBD section
and keeping the radosNamespace still under the
global ceph level configration for backward
compatibility.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
As the netNamespaceFilePath can be separate for
both cephfs and rbd adding the netNamespaceFilePath
path for RBD, This will help us to keep RBD and
CephFS specific options separately.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
The NFS Controller returns a non-gRPC error in case the CreateVolume
call for the CephFS volume fails. It is better to return the gRPC-error
that the CephFS Controller passed along.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Kubernetes CSI now hosts the container-image for the NFS-nodeplugin in
the the k8s.gcr.io instead of the Microsoft registry.
See-also: kubernetes-csi/csi-driver-nfs@7b5b6f344
Signed-off-by: Niels de Vos <ndevos@redhat.com>
The NFS-Admin API has been added to go-ceph v0.15.0. As the API can not
be tested in the go-ceph CI, it requires build-tag `ceph_ci_untested`.
This additional build-tag has been added to the `Makefile` and should be
removed when the API does not require the build-tag anymore.
See-also: ceph/go-ceph#655
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Recent versions of Ceph allow calling the NFS-export management
functions over the go-ceph API.
This seems incompatible with older versions that have been tested with
the `ceph nfs` commands that this commit replaces.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
use leases for leader election instead
of the deprecated configmap based leader
election.
This PR is making leases as default leader election
refer https://github.com/kubernetes-sigs/
controller-runtime/pull/1773, default from configmap
to configmap leases was done with
https://github.com/kubernetes-sigs/
controller-runtime/pull/1144.
Release notes https://github.com/kubernetes-sigs/
controller-runtime/releases/tag/v0.7.0
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Instead of patching the PV to update
the persistentVolumeReclaimPolicy and
the claimRef before deleting the PVC.
Patch PV persistentVolumeReclaimPolicy to Retain
to retain the PV after deleting the PVC.
Remove the claimRef on the PV after deleting
the PVC so that claim can be attached to a new PVC.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
To consider the image is healthy during the Promote
operation currently we are checking only the image
state on the primary site. If the network is flaky
or the remote site is down the image health is
not as expected. To make sure the image is healthy
across the clusters check the state on both local
and the remote clusters.
some details:
https://bugzilla.redhat.com/show_bug.cgi?id=2014495
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
we no longer require the kubernetes validation for clone tests in
the e2e tests. This commit remove it for CephFS.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
we no longer require the kubernetes validation for clone tests in
the e2e tests. This commit remove it for RBD.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
On OpenShift it is not possible for the Rook toolbox to get the metrics
from Kubelet (without additional configuration). By passing
-is-openshift, the metrics are not checked, and the e2e suite does not
fail on that particular piece.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
A new -filesystem=... option has been added so that the e2e tests can
run against environments that do not have a "myfs" CephFS filesystem.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
In case the toolbox pod is not available, the error message lists that
no Pods are found, but there is no hint about the toolbox. By mentioning
the toolbox in the error message, it suggests a good place to start
troubleshooting the environment.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
This commit correct the release version of upgrade tests from
unsupported 3.3.1 to supported version.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
calling setRbdNbdToolFeatures inside an init
gets called in main.go for both cephfs and rbd
driver. instead of calling it in init function
calling this in rbd driver.go as this is specific
to rbd.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Considering snapshot controllers have been moved to GA since
kube version 1.20, we no longer need to have a mention of beta
version of the same in our deployment.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
This argument in csi-snapshotter sidecar allows us to receive
snapshot-name/snapshot-namespace/snapshotcontent-name metadata in the
CreateSnapshot() request.
For ex:
csi.storage.k8s.io/volumesnapshot/name
csi.storage.k8s.io/volumesnapshot/namespace
csi.storage.k8s.io/volumesnapshotcontent/name
This is a useful information which can be used depend on the use case we
have at our driver. The features like adding metadata to snapshot image
can consume this based on the need.
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Set snapshot-name/snapshot-namespace/snapshotcontent-name details
on RBD backend snapshot image as metadata on snapshot
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
* create a PVC and check PVC/PV metadata on RBD image
* create and delete a PVC, attach the old PV to a new PVC and check if
PVC metadata is updated on RBD image
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Make sure to set metadata when image exist, i.e. if the provisioner pod
is restarted while createVolume is in progress, say it created the image
but didn't yet set the metadata.
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Example if a PVC was delete by setting `persistentVolumeReclaimPolicy` as
`Retain` on PV, and PV is reattached to a new PVC, we make sure to update
PV/PVC image metadata on a PV reattach.
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
This helps Monitoring solutions without access to Kubernetes clusters to
display the details of the PV/PVC/NameSpace in their dashboard.
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Define and use PV and PVC metadata keys used by external provisioner.
The CSI external-provisioner (v1.6.0+) introduces the
--extra-create-metadata flag, which automatically sets map<string, string>
parameters in the CSI CreateVolumeRequest.
Add utility functions to set/Get PV/PVC/PVCNamespace metadata on image
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
add support to run rbd map and mount -t
commands with the nsenter.
complete design of pod/multus network
is added here https://github.com/rook/rook/
blob/master/design/ceph/multus-network.md#csi-pods
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
we already have generic rules to merge the PR's
in devel and release branches with `automatic merge`
rules. Removing the duplicate release-3.5 rule.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
