Commit Graph

27 Commits

Author SHA1 Message Date
Madhu Rajanna
f05c9a6a93 ci: fix psp issue in minikube latest version
With minikube versions greater than 1.6.2 and less than 1.11.1, the YAML files
minikube path will not be automatically applied to the cluster. we will get
errors during bootstrap of the cluster if the admission controller is enabled.

To use Pod Security Policies with these versions of minikube, first start a
cluster without the `PodSecurityPolicy` admission controller enabled.

Next, apply the psp yaml. and stop the cluster and then restart it
with the admission controller enabled.

```
minikube start
kubectl apply -f /path/to/psp.yaml
minikube stop
minikube start --extra-config=apiserver.enable-admission-plugins=PodSecurityPolicy
```

Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-07-10 09:47:21 +00:00
Niels de Vos
81b17c5157 ci: pass target filename of /etc/resolv.conf in case it is a symlink
In some Linux distributions the /etc/resolv.conf file is a symlink. This
file gets included in the Kubernetes containers and will be used for
resolving hostnames. By including the symlink, it is possible that that
target file is not available in the container(s). This will cause
problems when resolving hostnames, and Kubernetes will not get deployed.

The default minikube VM provides /run/systemd/resolve/resolv.conf, with
/etc/resolv.conf being a symlink. Therefor, it is needed to pass the
`--extra-config=kubelet.resolv-conf=..` parameter to `kubeadm`.

In case minikube is started with `--vm-driver=none` and
/run/systemd/resolve/resolv.conf does not exist, the local
/etc/resolv.conf will be used for inclusion in the Kubelet container. If
this is a symlink, the final destination should get passed with
`--extra-config=kubelet.resolv-conf=..` so that a working hostname
resolution configuration is available in the container.

Updates: #1121
Signed-off-by: Niels de Vos <ndevos@redhat.com>
2020-06-05 08:57:19 +00:00
Mehdy Khoshnoody
79cef18f8f ci: Use bionic dist for test environments
As bionic uses a newer version of linux we'd also be using
a newer version of krbd.

Signed-off-by: Mehdy Khoshnoody <mehdy.khoshnoody@gmail.com>
2020-05-29 10:08:24 +00:00
Niels de Vos
58c2a3f15f minikube: fix ShellCheck errors
Signed-off-by: Niels de Vos <ndevos@redhat.com>
2020-04-21 05:26:32 +00:00
ShyamsundarR
e73921f268 Add e2e tests for topology based provisioning
- This commit adds tests only for RBD, as CephFS still needs
an enhancement in CephFS subvolume commands to effectively use
topology based provisioning

Signed-off-by: ShyamsundarR <srangana@redhat.com>
2020-04-14 14:14:29 +00:00
Madhu Rajanna
58765e27a0 Resizer: Update resizer image version
Recently resizer 0.5.0 has been released.
This PR updated the resizer container from
v0.4.0 to v0.5.0

Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-04-06 12:06:54 +00:00
Wong Hoi Sing Edison
ebe5aa00cf Upgrade: csi-node-driver-registrar from v1.2.0 to v1.3.0
See https://github.com/kubernetes-csi/node-driver-registrar/releases/tag/v1.3.0
See https://github.com/kubernetes-csi/node-driver-registrar/blob/v1.3.0/CHANGELOG-1.3.md
2020-04-01 08:39:37 +00:00
Wong Hoi Sing Edison
d67ad47c45 Upgrade: csi-attacher from v2.1.0 to v2.1.1
This PR follow up the missing files from ceph-csi:v2.0.1, besides:

  - deploy/cephfs/kubernetes/csi-cephfsplugin-provisioner.yaml
  - deploy/rbd/kubernetes/csi-rbdplugin-provisioner.yaml

See https://github.com/kubernetes-csi/external-attacher/releases/tag/v2.1.1
See https://github.com/kubernetes-csi/external-attacher/blob/v2.1.1/CHANGELOG-2.1.md
2020-03-31 05:33:18 +00:00
Oguz Kilcan
aadce54b2f Added PodSecurityPolicy support 2020-01-22 08:19:42 +00:00
Madhu Rajanna
520ceb6dcb Fix allignment issue in shellscript
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2020-01-20 17:33:03 +05:30
wilmardo
f04af5742d refact: Remove Kubernetes 1.13.x support
Signed-off-by: wilmardo <info@wilmardenouden.nl>
2020-01-20 10:32:30 +00:00
sophal
327fcd1b1b Rook deploy script, Adding rbd_pool check and cephfilesystem check. 2020-01-14 08:51:27 +00:00
Yibo Cai
4b8b52e0de Support Arm64 image
Update CI merge job to build and push Arm64 image to
quay.io/cephcsi/cephcsi:version-arm64.

Add CI PR job running on Travis Arm64 nodes to make sure cephcsi
compiles successfully on Arm64.

No CI test job is availabe for Arm64 now due to below issues
- k8s-csi sidecar images for Arm64 are not available
- Travis Arm64 CI job runs inside unprivileged LXD which blocks
  launching minikube test environment

Signed-off-by: Yibo Cai <yibo.cai@arm.com>
2020-01-09 09:53:50 +00:00
Wong Hoi Sing Edison
543360ee00 Upgrade: csi-attacher from v1.2.0 to v2.1.0
See https://github.com/kubernetes-csi/external-attacher/releases/tag/v2.1.0
See https://github.com/kubernetes-csi/external-attacher/blob/v2.1.0/CHANGELOG-2.1.md
2020-01-07 14:27:29 +00:00
Wong Hoi Sing Edison
202a2a7200 Upgrade: csi-snapshotter from v1.2.1 to v1.2.2
See https://github.com/kubernetes-csi/external-snapshotter/releases/tag/v1.2.2
See https://github.com/kubernetes-csi/external-snapshotter/blob/v1.2.2/CHANGELOG-1.2.md
2020-01-06 12:36:44 +00:00
Wong Hoi Sing Edison
f37bdfdd44 Upgrade: csi-node-driver-registrar from v1.1.0 to v1.2.0
See https://github.com/kubernetes-csi/node-driver-registrar/releases/tag/v1.2.0
See https://github.com/kubernetes-csi/node-driver-registrar/blob/v1.2.0/CHANGELOG-1.2.md
2020-01-06 07:48:41 +00:00
Wong Hoi Sing Edison
74cb18bd28 Upgrade: csi-resizer from v0.3.0 to v0.4.0
See https://github.com/kubernetes-csi/external-resizer/releases/tag/v0.4.0
See https://github.com/kubernetes-csi/external-resizer/blob/v0.4.0/CHANGELOG-0.4.md
2020-01-05 07:21:12 +00:00
Wong Hoi Sing Edison
3e656769b7 Update csi-provisioner from v1.3.0 to v1.4.0
See https://github.com/kubernetes-csi/external-provisioner/releases/tag/v1.4.0
See https://github.com/kubernetes-csi/external-provisioner/blob/v1.4.0/CHANGELOG-1.4.md
2020-01-02 15:53:07 +00:00
Humble Chirammal
8e437244de Enable RBD resizer in travis
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
2019-12-13 12:40:12 +00:00
Woohyung Han
2c9d711463 Move rook-deploy code from e2e to ./scripts/minikube.sh
We have the e2e test with --deploy-rook=true that makes all test
environment. It works fine, but It does not seem to be the role of
e2e test. In addition, when developing the code we need to run full
test scenario with deploying rook every time, or we need to build
rook environment by hand. Move rook-deploy code to minikube.sh.
2019-12-05 12:32:59 +00:00
Humble Chirammal
671e2d814a Add volumesize roundoff for expandrequest
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
2019-11-27 14:00:47 +00:00
Humble Chirammal
ac09c5553c Add E2E for cephfs resize functionality
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
2019-11-27 14:00:47 +00:00
Humble Chirammal
0fc7f4513b Snashotter update
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
2019-08-19 05:06:42 +00:00
ShyamsundarR
c5762b6b5c Modify RBD plugin to use a single ID and move the id and key into the secret
RBD plugin needs only a single ID to manage images and operations against a
pool, mentioned in the storage class. The current scheme of 2 IDs is hence not
needed and removed in this commit.

Further, unlike CephFS plugin, the RBD plugin splits the user id and the key
into the storage class and the secret respectively. Also the parameter name
for the key in the secret is noted in the storageclass making it a variant and
hampers usability/comprehension. This is also fixed by moving the id and the key
to the secret and not retaining the same in the storage class, like CephFS.

Fixes #270

Testing done:
- Basic PVC creation and mounting

Signed-off-by: ShyamsundarR <srangana@redhat.com>
2019-06-24 13:46:14 +00:00
Madhu Rajanna
9bb23e4e32 code changes for E2E
update travis and makefile for functional test

skip docker pull if image is already present
on local machine.

if the image is not present locally  pull the
image from repo.

export kubeconfig in travis

build cephcsi image in travis job for
functional testing

Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2019-06-04 11:39:40 +05:30
Humble Chirammal
dcdee86c44 Update minikube to 1.14 and also update container images to latest
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
2019-06-04 05:44:40 +05:30
Madhu Rajanna
7599d42f1b Get TravisCI instance of Kube
installing Kube with a script will also
help developers to do local testing.

Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
2019-05-28 03:42:48 +00:00