This will help user to check whats
the actual error. if the config file
is having issue or the clusterid is
not valid.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Image deletion takes time proportional to the size of the
image. Hence, ceph manager is enhanced to support async
deletion of an image, or rather passing the task of
deleting an image to the ceph manager.
This commit leverages the ceph manager enhancement in the CSI code.
NOTE: This is tested against a ceph cluster that is running
Ceph master version of the code. Once other releases
catch up in terms of the feature, the optimization would be
available to the CSI driver as well.
Fixes: #523
Signed-off-by: ShyamsundarR <srangana@redhat.com>
The container runtime CRI-O limits the number of PIDs to 1024 by
default. When many PVCs are requested at the same time, it is possible
for the provisioner to start too many threads (or go routines) and
executing 'rbd' commands can start to fail. In case a go routine can not
get started, the process panics.
The PID limit can be changed by passing an argument to kubelet, but this
will affect all pids running on a host. Changing the parameters to
kubelet is also not a very elegant solution.
Instead, the provisioner pod can change the configuration itself. The
pod is running in privileged mode and can write to /sys/fs/cgroup where
the limit is configured.
With this change, the limit is configured to 'max', just as if there is
no limit at all. The logs of the csi-rbdplugin in the provisioner pod
will reflect the change it makes when starting the service:
$ oc -n rook-ceph logs -c csi-rbdplugin csi-rbdplugin-provisioner-0
..
I0726 13:59:19.737678 1 cephcsi.go:127] Initial PID limit is set to 1024
I0726 13:59:19.737746 1 cephcsi.go:136] Reconfigured PID limit to -1 (max)
..
It is possible to pass a different limit on the commandline of the
cephcsi executable. The following flag has been added:
--pidlimit=<int> the PID limit to configure through cgroups
This accepts special values -1 (max) and 0 (default, do not
reconfigure). Other integers will be the limit that gets configured in
cgroups.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
In unstage we now adhere to the transaction (or order of steps)
done in Stage. To enable this we stash the image meta data
into a local file on the staging path for use with unstage
request.
This helps in unmapping a stale map, in case the mount or
other steps in the transaction are complete.
Signed-off-by: ShyamsundarR <srangana@redhat.com>
This change also starts mapping nbd based access using ther rbd CLI
as, it is a prerequisite to get device listing for nbd as well.
Signed-off-by: ShyamsundarR <srangana@redhat.com>
This commit moves the mounting of a block volumes and filesystems
to a sub-file (already the case) or a sub-dir within the staging
path.
This enables using the staging path to store any additional data
regarding the mount. For example, this will be extended in the
future to store the fsid of the cluster, and maybe the pool name
to map unmap requests to the right image.
Also, this fixes the noted hack in the code, to determine in a
common manner if there is a mount on the passed in staging path.
Signed-off-by: ShyamsundarR <srangana@redhat.com>
once we map the rbd image on a node
we will get the device name its mapped
in the map output itself,no need to
check the devicepath post rbd mapping
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
It's CO responsibility to create the
stagingPath as per the CSI spec.
The CO SHALL ensure
// that the path is directory and that the process serving the
// request has `read` and `write` permission to that directory. The
// CO SHALL be responsible for creating the directory if it does not
// exist.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
... and not that of the FS subvolume group `csi`.
There is no reason for setting the mode of FS subvolume group `csi`
(a CephFS subdirectory) as 777. It's default mode is 755. It's
sufficient to set the mode of FS subvolumes within the subvolume group
to `777`.
Signed-off-by: Ramana Raja <rraja@redhat.com>
... instead of that of the `csi` subvolume group. The pool layout
specified via storage class's `pool` setting is a subvolume property
and not a subvolume group property. The `csi` subvolume group
may have subvolumes of different storage classes with different
pool layouts.
Fixes: #499
Signed-off-by: Ramana Raja <rraja@redhat.com>
if mapping of rbd device is passed and mounting
device to stagingpath fails or if chmod on targetpath fails
,which may leave up stale mapping if
unstage is called
this will be fixed by unmapping if somthing fails
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Every Ceph CLI that is invoked at present passes the key via the
--key option, and hence is exposed to key being displayed on
the host using a ps command or such means.
This commit addresses this issue by stashing the key in a tmp
file, which is again created on a tmpfs (or empty dir backed by
memory). Further using such tmp files as arguments to the --keyfile
option for every CLI that is invoked.
This prevents the key from being visible as part of the argument list
of the invoked program on the system.
Fixes: #318
Signed-off-by: ShyamsundarR <srangana@redhat.com>
Currently, provisioner creates user for every volume and nodeplugin
uses this user to mount that volume. But nodeplugin and provisioner
already have admin credentials, hence using the admin credentials
to mount the volume and getting rid of user creation for each volume.
Signed-off-by: Poornima G <pgurusid@redhat.com>
in NodeStage RPC call we have to map the
device to the node plugin and make sure the
the device will be mounted to the global path
in nodeUnstage request unmount the device from
global path and unmap the device
if the volume mode is block we will be creating
a file inside a stageTargetPath and it will be
considered as the global path
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
File descriptors in use to parse errors from a few command
invocations were incorrect. This led to inability to detect
certain errors cases and act accordingly.
One of the easiest noticeable issues was when an image is deleted
but its RADOS keys and maps are still intact. In such cases
the DeleteVolume call always errored out unable to find the
image rather than, proceed with cleaning up the RADOS objects
and returning a success.
The original method of using stdout was incorrect, as the command
was tested from within a shell script and the scripts STDIN/OUT/ERR
was redirected to understand behavior. This is now tested using just
the CLI in question, and also examining Ceph code, and further
testing a couple of edge conditions by deleting backing images
for PVs
Signed-off-by: ShyamsundarR <srangana@redhat.com>
update driver version and add git commit
to the image. This will help us to identify
what latest git commit image contains.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Currently CephFs provisioner mounts the ceph filesystem
and creates a subdirectory as a part of provisioning the
volume. Ceph now supports commands to provision fs subvolumes,
hance modify the provisioner to use ceph mgr commands to
(de)provision fs subvolumes.
Signed-off-by: Poornima G <pgurusid@redhat.com>
This commit adds support to mount and delete volumes provisioned by older
plugin versions (1.0.0) in order to support backward compatibility to 1.0.0
created volumes.
It adds back the ability to specify where older meta data was specified, using
the metadatastorage option to the plugin. Further, using the provided meta data
to mount and delete the older volumes.
It also supports a variety of ways in which monitor information may have been
specified (in the storage class, or in the secret), to keep the monitor
information current.
Testing done:
- Mount/Delete 1.0.0 plugin created volume with monitors in the StorageClass
- Mount/Delete 1.0.0 plugin created volume with monitors in the secret with
a key "monitors"
- Mount/Delete 1.0.0 plugin created volume with monitors in the secret with
a user specified key
- PVC creation and deletion with the current version (to ensure at the minimum
no broken functionality)
- Tested some negative cases, where monitor information is missing in secrets
or present with a different key name, to understand if failure scenarios work
as expected
Updates #378
Follow-up work:
- Documentation on how to upgrade to 1.1 plugin and retain above functionality
for older volumes
Signed-off-by: ShyamsundarR <srangana@redhat.com>
As detailed in issue #279, current lock scheme has hash
buckets that are count of CPUs. This causes a lot of contention
when parallel requests are made to the CSI plugin. To reduce
lock contention, this commit introduces granular locks per
identifier.
The commit also changes the timeout for gRPC requests to Create
and Delete volumes, as the current timeout is 10s (kubernetes
documentation says 15s but code defaults are 10s). A virtual
setup takes about 12-15s to complete a request at times, that leads
to unwanted retries of the same request, hence the increased
timeout to enable operation completion with minimal retries.
Tests to create PVCs before and after these changes look like so,
Before:
Default master code + sidecar provisioner --timeout option set
to 30 seconds
20 PVCs
Creation: 3 runs, 396/391/400 seconds
Deletion: 3 runs, 218/271/118 seconds
- Once was stalled for more than 8 minutes and cancelled the run
After:
Current commit + sidecar provisioner --timeout option set to 30 sec
20 PVCs
Creation: 3 runs, 42/59/65 seconds
Deletion: 3 runs, 32/32/31 seconds
Fixes: #279
Signed-off-by: ShyamsundarR <srangana@redhat.com>
Also reduced code duplication in fetching pool list from Ceph.
DeleteSnapshot like DeleteVolume, should return a success when it
detects that the snapshot keys are missing from the RADOS OMaps that
store the snapshot UUID to request name mapping.
This was missing in the code, and is now added.
Signed-off-by: ShyamsundarR <srangana@redhat.com>
RBD plugin needs only a single ID to manage images and operations against a
pool, mentioned in the storage class. The current scheme of 2 IDs is hence not
needed and removed in this commit.
Further, unlike CephFS plugin, the RBD plugin splits the user id and the key
into the storage class and the secret respectively. Also the parameter name
for the key in the secret is noted in the storageclass making it a variant and
hampers usability/comprehension. This is also fixed by moving the id and the key
to the secret and not retaining the same in the storage class, like CephFS.
Fixes#270
Testing done:
- Basic PVC creation and mounting
Signed-off-by: ShyamsundarR <srangana@redhat.com>
* Enable all static-checks in golangci-lint
* Update golangci-lint version
* Fix issue found in golangci-lint
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
The SnapshotClass for RBD requires a pool parameter. This is redundant
as a snapshot is not created on a different pool than the source image
of the snapshot (refer rbd man page).
Further, when a snapshot needs to be created its source CSI VolumeID
is passed to the creation call, and hence the source volumes pool
needs to be reused to create the snapshot.
Similarly to clone a snapshot, the create request would come in with a
SnapshotID to help identify the snapshot pool, and the same create
request parameters would contain the storage class based pool parameter
to create the clone into (as clones can be in different pools as
compared to their parent snapshots).
Thus, the parameter pool seems redundant in the snapshot class and
should be removed to improve ease of use.
Fixes#379
Signed-off-by: ShyamsundarR <srangana@redhat.com>
This is a part of the stateless set of commits for CephCSI.
This commit removes the dependency on config maps to store cephFS provisioned
volumes, and instead relies on RADOS based objects and keys, and required
CSI VolumeID encoding to detect the provisioned volumes.
Changes:
- Provide backward compatibility to provisioned volumes by older plugin versions (1.0.0 or older)
- Remove Create/Delete support for statically provisioned volumes (fixes#382)
- Added namespace support to RADOS OMaps and used the same to store RADOS CSI objects and keys in the CephFS metadata pool
- Added support to mention fsname for CephFS provisioning (fixes#359)
- Changed field name in CSI Identifier to 'location', to denote a pool or fscid
- Updated mounter cache to use new scheme
- Required Helm manifests are updated
- Required documentation and other manifests are updated
- Made driver option 'metadatastorage' as optional, as fresh installs do not need to specify the same
Testing done:
- Create/Mount/Delete PVC
- Create/Delete 5 PVCs
- Mount version 1.0.0 PVC
- Delete version 1.0.0 PV
- Mount Statically defined PV/PVC/Pod
- Mount Statically defined version 1.0.0 PV/PVC/Pod
- Delete Statically defined version 1.0.0 PV/PVC/Pod
- Node restart when mounted to test mountcache
- Use InstanceID other than 'default'
- RBD basic round of tests, as namespace is added to OMaps
- csitest against ceph-fs plugin
- NOTE: CephFS plugin still does not detect and address already created
volumes but of a different size
- Test not providing any value to the metadata storage parameter
Signed-off-by: ShyamsundarR <srangana@redhat.com>
Existing config maps are now replaced with rados omaps that help
store information regarding the requested volume names and the rbd
image names backing the same.
Further to detect cluster, pool and which image a volume ID refers
to, changes to volume ID encoding has been done as per provided
design specification in the stateless ceph-csi proposal.
Additional changes and updates,
- Updated documentation
- Updated manifests
- Updated Helm chart
- Addressed a few csi-test failures
Signed-off-by: ShyamsundarR <srangana@redhat.com>
Based on the review comments addressed the following,
- Moved away from having to update the pod with volumes
when a new Ceph cluster is added for provisioning via the
CSI driver
- The above now used k8s APIs to fetch secrets
- TBD: Need to add a watch mechanisim such that these
secrets can be cached and updated when changed
- Folded the Cephc configuration and ID/key config map
and secrets into a single secret
- Provided the ability to read the same config via mapped
or created files within the pod
Tests:
- Ran PV creation/deletion/attach/use using new scheme
StorageClass
- Ran PV creation/deletion/attach/use using older scheme
to ensure nothing is broken
- Did not execute snapshot related tests
Signed-off-by: ShyamsundarR <srangana@redhat.com>
This commit provides the option to pass in Ceph cluster-id instead
of a MON list from the storage class.
This helps in moving towards a stateless CSI implementation.
Tested the following,
- PV provisioning and staging using cluster-id in storage class
- PV provisioning and staging using MON list in storage class
Did not test,
- snapshot operations in either forms of the storage class
Signed-off-by: ShyamsundarR <srangana@redhat.com>
issue #217
Goal
we try to solve when csi exit unexpect, the pod use cephfs pv can not auto recovery because lost mount relation until pod be killed and reschedule to other node. i think this is may be a problem. may be csi plugin can do more thing to remount the old path so when pod may be auto recovery when pod exit and restart, the old mount path can use.
NoGoal
Pod should exit and restart when csi plugin pod exit and mount point lost. if pod not exit will get error of **transport endpoint is not connected**.
implment logic
csi-plugin start:
1. load all MountCachEntry from node local dir
2. check if volID exist in cluster, if no we ignore this entry, if yes continue
3. check if stagingPath exist, if yes we mount the path
4. check if all targetPath exist, if yes we binmount to staging path
NodeServer:
1. NodeStageVolume: add MountCachEntry on local dir include readonly attr and ceph secret
2. NodeStagePublishVolume: add pod bind mount path to MountCachEntry and persist local dir
3. NodeStageunPublishVolume: remove pod bind mount path From MountCachEntry and persist local dir
4. NodeStageunStageVolume: remove MountCachEntry from local dir
This commit reverts the initial implementation of the
multi-node-multi-writer feature:
commit: b5b8e46460
It replaces that implementation with a more restrictive version that
only allows multi-node-multi-writer for volumes of type `block`
With this change there are no volume parameters required in the stoarge
class, we also fail any attempt to create a file based device with
multi-node-multi-write being specified, this way a user doesn't have to
wait until they try and do the publish before realizing it doesn't work.
during volume creation we check volume size in
bytes, and even during listing of volumes and
snapshots we need to check size in bytes
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
This change adds the ability to define a `multiNodeWritable` option in
the Storage Class.
This change does a number of things:
1. Allow multi-node-multi-writer access modes if the SC options is
enabled
2. Bypass the watcher checks for MultiNodeMultiWriter Volumes
3. Maintains existing watcher checks for SingleNodeWriter access modes
regardless of the StorageClass option.
fix lint-errors
looping over a map is not guaranteet
to be ordered.
we need to sort the volume ID's for
ListVolume rpc for rbd plugin.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
currently all the created volumes are
stored in the metadata store, so we
can use this information to support
list volumes.
Signed-off-by: Madhu Rajanna <mrajanna@redhat.com>
