made pool as a argument of listRBDImages to support
listing of rbd images in different pools.
Co-authored-by: Madhu Rajanna <madhupr007@gmail.com>
Signed-off-by: Yug <yuggupta27@gmail.com>
In the function validatePVCSnapshot(...), we don't need
validateEncryption variable as we are passing kms value
which can help us check the value of validateEncryption.
Hence, we can avoid using that.
Signed-off-by: Yati Padia <ypadia@redhat.com>
Test if metrics are available at all. The actual values are a little
difficult to validate.
BlockMode volumes support metrics since Kubernetes 1.22.
See-also: kubernetes/kubernetes#97972
Signed-off-by: Niels de Vos <ndevos@redhat.com>
when a Snapshot is encrypted during a CreateSnapshot
operation, the encryption key gets created in the KMS
when we delete the Snapshot the key from the KMS
should also gets deleted.
When we create a volume from snapshot we are copying
required information but we missed to copy the
encryption information, This commit adds the missing
information to delete the encryption key.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
The default number for cloning and snapshot/restore is 10 volumes. This
adds to the time the test suite runs. There is no need to validate 10
copies of the encrypted volume, a single copy is sufficient.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
This moves validatePVCSnapshot() into its own function, so that it
follows the same format as validatePVCClone() does already.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Key existence and removal is only checked for the VaultKMS provider. It
should also be done for the VaultTokensKMS provider.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Currently, in rbd snapshot restore and volume clone E2E we
are not checking any data consistency after doing snapshot
restore or volume clone. Hence, this PR writes the data in
the PVC and checks the checksum of the file and verify it with
the snapshot or cloned PVC.
Signed-off-by: Yati Padia <ypadia@redhat.com>
The e2e tests create a Secret for using with the RBD StorageClass.
However this Secret was not used, instead the Rook generated Secret was
linked in the StorageClass.
By using our own Secret from the examples, Rook should not touch it when
we make modifications. In addition, no modifications are needed for
encryption anymore, as these are included in the example.
Updates: #1795
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Once the Vault API removed a secret, the contents will have been wiped.
The key is still available, until it gets destroyed. This causes the e2e
test to detect an empty secret, and assume that it has not been deleted
yet.
By requesting the `data` field from the secret, an error is thrown in
case the secret has been wiped. This makes it possible for the e2e test
to detect that the secret has been removed and scheduled for destroying.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
This commits adds an E2E testing
to verify the metadata created by controller,
We are not checking the generated omap data,
but we will be verify PVC resize and binding
pvc to application.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Reduce the number of images that get pulled from Docker Hub. Use the
official CentOS container registry instead.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
There are several go-routines where Failf() is called, which will cause
a Golang panic inside the Ginko test framework. Instead of aborting the
go-routine, capture the error and check for failures once all
go-routines have finished.
The CephFS tests have been updated already, this changs only affects the
validatePVCClone() utility function.
Updates: #1359
Signed-off-by: Niels de Vos <ndevos@redhat.com>
If loadPVC() fails, it return error and we expect the PVC object
to be nil too. In many places we check on the error and exit.
However in few places we are looking at PVC object.
This commit make the condition check on `err` instead of `PVC`
object for consistency.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
The added anti-affinity rules prevent provisioner operators from scheduling on
the same nodes. The kubernetes scheduler will spread the pods across nodes to
improve availability during node failures.
Signed-off-by: Nico Berlee <nico.berlee@on2it.net>
These test cases are will be executed against a rados namespace.
- Create a PVC and bind it to an app.
- Resize block PVC and check device size.
- Create a PVC clone and bind it to an app.
Signed-off-by: Mehdy Khoshnoody <mehdy.khoshnoody@gmail.com>
writeDataInPod() write data to the attached PVC using `dd` command
It leave the pod and pvc state as it is.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
In Go 1.13, the fmt.Errorf function supports a new %w verb.
When this verb is present, the error returned by fmt.Errorf
will have an Unwrap method returning the argument of %w,
which must be an error. In all other ways, %w is identical to %v.
Updates: #1227
Signed-off-by: Yug <yuggupta27@gmail.com>
Added two new parameters for e2e test to skip
rbd and cephfs tests. This will help us to
run more test in Travis CI.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
With the current code base, the subvolumegroup will
be created once, and even for a different cluster,
subvolumegroup creation is not allowed again.
Added support multiple subvolumegroups creation by
validating one subvolumegroup creation per cluster.
Fixes: #1123
Signed-off-by: Yug Gupta <ygupta@redhat.com>
Go 1.13 contains support for error wrapping. To support wrapping,
fmt.Errorf now has a %w verb for creating wrapped errors, and three
new functions in the errors package ( errors.Unwrap, errors.Is and
errors.As) simplify unwrapping and inspecting wrapped errors.
With this change, If we currently compare errors using ==, we have to
use errors.Is instead. Example:
if err == io.ErrUnexpectedEOF
becomes
if errors.Is(err, io.ErrUnexpectedEOF)
https://tip.golang.org/doc/go1.13#error_wrapping
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
the static check is failing as the replicapool
is used in 3 or more places, we need to define
a variable and use it.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
The name of the CephFS SubvolumeGroup for the CSI volumes was hardcoded to "csi". To make permission management in multi tenancy environments easier, this commit makes it possible to configure the CSI SubvolumeGroup.
related to #798 and #931
IneffAssign warns about the two following statements:
Line 1342: warning: ineffectual assignment to rFound (ineffassign)
Line 1350: warning: ineffectual assignment to zFound (ineffassign)
rFound and zFound should be set before entering the loop, otherwise the
initial value will overwrite the updated value on each iteration.
Reported-by: https://goreportcard.com/report/github.com/ceph/ceph-csi
Updates: #975
Signed-off-by: Niels de Vos <ndevos@redhat.com>
This commit adds support to mention dataPool parameter for the
topology constrained pools in the StorageClass, that can be
leveraged to mention erasure coded pool names to use for RBD
data instead of the replica pools.
Signed-off-by: ShyamsundarR <srangana@redhat.com>
- This commit adds tests only for RBD, as CephFS still needs
an enhancement in CephFS subvolume commands to effectively use
topology based provisioning
Signed-off-by: ShyamsundarR <srangana@redhat.com>
With client-go v1.18.0 there is a change where Signatures on methods
in generated clientsets, dynamic, metadata, and scale clients have been
modified to accept context.Context as a first argument.
Signatures of Create, Update, and Patch methods have been updated to accept
CreateOptions, UpdateOptions and PatchOptions respectively.
Signatures of Delete and DeleteCollection methods now accept DeleteOptions
by value instead of by reference
The framework.RunkubectlInput now accepts namespace as the first parameter
which is also accommodated with this PR.
Signed-off-by: Humble Chirammal hchiramm@redhat.com
Updated E2E to use a normal user other than admin user,
who is having access to create and mount cephfs PVC and
create and map rbd PVC
we will use the user created by rook who is having above
access.
Signed-off-by: Madhu Rajanna madhupr007@gmail.com
This PR adds a test case for #904
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
