Issue:
The RoundOffCephFSVolSize() function omits the fractional
part when calculating the size for cephfs volumes, leading
to the created volume capacity to be lesser than the requested
volume capacity.
Fix:
Consider the fractional part during the size calculation so the
rounded off volume size will be greater than or equal to the
requested volume size.
Signed-off-by: karthik-us <ksubrahm@redhat.com>
Fixes: #4179
By default, `cryptsetup luksFormat` uses Argon2i as Password-Based Key
Derivation Function (PBKDF), which not only has a CPU cost, but also a memory
cost (to make brute-force attacks harder).
The memory cost is based on the available system memory by default, which in
the context of Ceph CSI can be a problem for two reasons:
1. Pods can have a memory limit (much lower that the memory available on the
node, usually) which isn't taken into account by `cryptsetup`, so it can get
OOM-killed when formating a new volume;
2. The amount of memory that was used during `cryptsetup luksFormat` will then
be needed for `cryptsetup luksOpen`, so if the volume was formated on a node
with a lot of memory, but then needs to be opened on a different node with
less memory, `cryptsetup` will get OOM-killed.
This commit sets the PBKDF memory limit to a fixed value to ensure consistent
memory usage regardless of the specifications of the nodes where the volume
happens to be formatted in the first place.
The limit is set to a relatively low value (32 MiB) so that the `csi-rbdplugin`
container in the `nodeplugin` pod doesn't require an extravagantly high memory
limit in order to format/open volumes (particularly with operations happening
in parallel), while at the same time not being so low as to render it
completely pointless.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
This commit makes use of crush location labels from node
labels to supply `crush_location` and `read_from_replica=localize`
options during rbd map cmd. Using these options, ceph
will be able to redirect reads to the closest OSD,
improving performance.
Signed-off-by: Rakshith R <rar@redhat.com>
Call Mount.Setup with SingleUserWritable constant instead of 0o755,
which is silently ignored and causes the /.fscrypt/{policy,protector}/
directories to have mode 000.
Signed-off-by: Marcel Lauhoff <marcel.lauhoff@suse.com>
Revert once our google/fscrypt dependency is upgraded to a version
that includes https://github.com/google/fscrypt/pull/359 gets accepted
Signed-off-by: Marcel Lauhoff <marcel.lauhoff@suse.com>
Use constant protector name 'ceph-csi' instead of constant prefix
concatenated with the volume ID. When cloning volumes the ID changes
and fscrypt protected directories become inunlockable due to the
protector name change
Signed-off-by: Marcel Lauhoff <marcel.lauhoff@suse.com>
NewContextFrom{Mountpoint,Path} functions use cached
`/proc/self/mountinfo` to find mounted file systems by device ID.
Since we run fscrypt as a library in a long-lived process the cached
information is likely to be stale. Stale entries may map device IDs to
mount points of already destroyed RBDs and fail context creation.
Updating the cache beforehand prevents this.
Signed-off-by: Marcel Lauhoff <marcel.lauhoff@suse.com>
Currently fscrypt supports policies version 1 and 2. 2 is the best
choice and was the only choice prior to this commit. This adds support
for kernels < 5.4, by selecting policy version 1 there.
Signed-off-by: Marcel Lauhoff <marcel.lauhoff@suse.com>
Fetch password when keyFn is invoked, not when it is created. This
allows creation of the keyFn before actually creating the passphrase.
Signed-off-by: Marcel Lauhoff <marcel.lauhoff@suse.com>
Fetch keys from KMS before doing anything else. This will catch KMS
errors before setting up any fscrypt metadata.
Signed-off-by: Marcel Lauhoff <marcel.lauhoff@suse.com>
Integrate google/fscrypt into Ceph CSI KMS and encryption setup. Adds
dependencies to google/fscrypt and pkg/xattr. Be as generic as
possible to support integration with both RBD and Ceph FS.
Add the following public functions:
InitializeNode: per-node initialization steps. Must be called
before Unlock at least once.
Unlock: All steps necessary to unlock an encrypted directory including
setting it up initially.
IsDirectoryUnlocked: Test if directory is really encrypted
Signed-off-by: Marcel Lauhoff <marcel.lauhoff@suse.com>
Fetch encryption type from vol options. Make fallback type
configurable to support RBD (default block) and Ceph FS (default file)
Signed-off-by: Marcel Lauhoff <marcel.lauhoff@suse.com>
fscrypt support requires keys longer than 20 bytes. As a preparation,
make the new passphrase length configurable, but default to 20 bytes.
Signed-off-by: Marcel Lauhoff <marcel.lauhoff@suse.com>
This commit cleans up for loop to use index to access
value instead of copying value into a new variable
while iterating.
```
internal/util/csiconfig.go:103:2: rangeValCopy: each \
iteration copies 136 bytes (consider pointers or indexing) \
(gocritic)
for _, cluster := range config {
```
Signed-off-by: Rakshith R <rar@redhat.com>
This commit adds nfs nodeserver capable of
mounting nfs volumes, even with pod networking
using NSenter design similar to rbd and cephfs.
NodePublish, NodeUnpublish, NodeGetVolumeStats
and NodeGetCapabilities have been implemented.
The nodeserver implementation has been inspired
from https://github.com/kubernetes-csi/csi-driver-nfs,
which was previously used for mounted cephcsi exported
nfs volumes. The current implementation is also
backward compatible for the previously created
PVCs.
Signed-off-by: Rakshith R <rar@redhat.com>
Recently the k8s.io/mount-utils package added more runtime dectection.
When creating a new Mounter, the detect is run every time. This is
unfortunate, as it logs a message like the following:
```
mount_linux.go:283] Detected umount with safe 'not mounted' behavior
```
This message might be useful, so it probably good to keep it.
In Ceph-CSI there are various locations where Mounter instances are
created. Moving that to the DefaultNodeServer type reduces it to a
single place. Some utility functions need to accept the additional
parameter too, so that has been modified as well.
See-also: kubernetes/kubernetes#109676
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Due to the bug in the df stat we need to round off
the subvolume size to align with 4Mib.
Note:- Minimum supported size in cephcsi is 1Mib,
we dont need to take care of Kib.
fixes#3240
More details at https://github.com/ceph/ceph/pull/46905
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
There are regular reports that identify a non-error as the cause of
failures. The Kubernetes mount-utils package has detection for systemd
based environments, and if systemd is unavailable, the following error
is logged:
Cannot run systemd-run, assuming non-systemd OS
systemd-run output: System has not been booted with systemd as init
system (PID 1). Can't operate.
Failed to create bus connection: Host is down, failed with: exit status 1
Because of the `failed` and `exit status 1` error message, users might
assume that the mounting failed. This does not need to be the case. The
container-images that the Ceph-CSI projects provides, do not use
systemd, so the error will get logged with each mount attempt.
By using the newer MountSensitiveWithoutSystemd() function from the
mount-utils package where we can, the number of confusing logs get
reduced.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
As we added support to set the metadata on the rbd images created for
the PVC and volume snapshot, by default metadata is set on all the images.
As we have seen we are hitting issues#2327 a lot of times with this,
we start to leave a lot of stale images. Currently, we rely on
`--extra-create-metadata=true` to decide to set the metadata or not,
we cannot set this option to false to disable setting metadata because we
use this for encryption too.
This changes is to provide an option to disable setting the image
metadata when starting cephcsi.
Fixes: #3009
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
create the token if kubernetes version in
1.24+ and use it for vault sa.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Signed-off-by: Rakshith R <rar@redhat.com>
This change helps read the cluster name from the cmdline args,
the provisioner will set the same on the RBD images.
Fixes: #2973
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
With cgroup v2, the location of the pids.max file changed and so did the
/proc/self/cgroup file
new /proc/self/cgroup file
`
0::/user.slice/user-500.slice/session-14.scope
`
old file:
`
11:pids:/user.slice/user-500.slice/session-2.scope
10:blkio:/user.slice
9:net_cls,net_prio:/
8:perf_event:/
...
`
There is no directory per subsystem (e.g. /sys/fs/cgroup/pids) any more, all
files are now in one directory.
fixes: https://github.com/ceph/ceph-csi/issues/3085
Signed-off-by: Marcus Röder <m.roeder@yieldlab.de>
as same host directory is not shared between
the cephfs and the rbd plugin pod. we need
to keep the netNamespaceFilePath separately
for both cephfs and rbd. CephFS plugin will
use this path to execute mount -t commands.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
As radosNamespace is more specific to
RBD not the general ceph configuration. Now
we introduced a new RBD section for RBD specific
options, Moving the radosNamespace to RBD section
and keeping the radosNamespace still under the
global ceph level configration for backward
compatibility.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
As the netNamespaceFilePath can be separate for
both cephfs and rbd adding the netNamespaceFilePath
path for RBD, This will help us to keep RBD and
CephFS specific options separately.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Recent versions of Ceph allow calling the NFS-export management
functions over the go-ceph API.
This seems incompatible with older versions that have been tested with
the `ceph nfs` commands that this commit replaces.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Set snapshot-name/snapshot-namespace/snapshotcontent-name details
on RBD backend snapshot image as metadata on snapshot
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Example if a PVC was delete by setting `persistentVolumeReclaimPolicy` as
`Retain` on PV, and PV is reattached to a new PVC, we make sure to update
PV/PVC image metadata on a PV reattach.
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Define and use PV and PVC metadata keys used by external provisioner.
The CSI external-provisioner (v1.6.0+) introduces the
--extra-create-metadata flag, which automatically sets map<string, string>
parameters in the CSI CreateVolumeRequest.
Add utility functions to set/Get PV/PVC/PVCNamespace metadata on image
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
add support to run rbd map and mount -t
commands with the nsenter.
complete design of pod/multus network
is added here https://github.com/rook/rook/
blob/master/design/ceph/multus-network.md#csi-pods
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Restoring a snapshot with a new PVC results with a wrong
dataPoolName in case of initial volume linked
to a storageClass with topology constraints and erasure coding.
Signed-off-by: Thibaut Blanchard <thibaut.blanchard@gmail.com>
RT, reference tracker, is key-based implementation of a reference counter.
Unlike an integer-based counter, RT counts references by tracking unique
keys. This allows accounting in situations where idempotency must be
preserved. It guarantees there will be no duplicit increments or decrements
of the counter.
Signed-off-by: Robert Vasek <robert.vasek@cern.ch>
added helper function to strip the kubernetes
specific parameters from the volumeContext as
volumeContext is storaged in the PV volumeAttributes
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
