Considering kubelet make sure the stage and publish operations
are serialized, we dont need any extra locking in nodePublish
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
Considering kubelet make sure the unstage and unpublish operations
are serialized, we dont need any extra locking in nodeUnpublish
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
This commit resolves godot linter issue
which says "Comment should end in a period (godot)".
Updates: #1586
Signed-off-by: Yati Padia <ypadia@redhat.com>
Updated kubernetes packages to latest release.
resizefs package has been included into k8s.io/mount-utils
package. updated code to use the same.
Updates: #1968
Signed-off-by: Rakshith R <rar@redhat.com>
We have many declarations and invocations..etc with long lines which are
very difficult to follow while doing code reading. This address the issues
in 'internal/rbd/*server.go' and 'internal/rbd/driver.go' files to restrict
the line length to 120 chars.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
Added helper func isNotMountPoint to check mountPoint,
validate error and reduce complexity of NodeStageVolume.
Signed-off-by: Rakshith R <rar@redhat.com>
This commit adds checks for missing `imageFeatures` parameter
in createvolumerequest and nodestagerequest(only for static PVs).
Missing `imageFeatures` parameter is ignored in case of non-static
PVs to ensure backwards compatibility with older versions which
did not have `imageFeatures` as required parameter.
Signed-off-by: Rakshith R <rar@redhat.com>
Thick-provisioned images are independent, cloned images or snapshots are
deep-flattened during creation. There is no need to try and flatten them
again.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
This commit addresses the following issue:
'nolint:gocyclo // complexity needs to be reduced.'
is unused for linter "gocyclo" (nolintlint)
Updates:#2025
Signed-off-by: Yati Padia <ypadia@redhat.com>
The NodeGetVolumeStats procedure can now be used to fetch the capacity
of the RBD block-device. By default this is a thin-provisioned device,
which means that the capacity is not reserved in the Ceph cluster. This
makes it possible to over-provision the cluster.
In order to detect the amount of storage used by the RBD block-device
(when thin-provisioned), it is required to connect to the Ceph cluster.
Unfortunately, the NodeGetVolumeStats CSI procedure does not provide
enough parameters to connect to the Ceph cluster and fetch more details
about the RBD image.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
flatten the image if the deep-flatten feature
is present on the images in the chain or if the
images in chain is not zero, as we cannot check
the deep-flatten feature the images which are
in trash.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
The new gosec 2.7.0 complains like:
G304 (CWE-22): Potential file inclusion via variable (Confidence: HIGH, Severity: MEDIUM)
Updates: #2025
Signed-off-by: Niels de Vos <ndevos@redhat.com>
It seems that newer versions of some tools/libraries identify encrypted
filesystems with `crypto_LUKS` instead of `crypt`.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Prepare for grouping encryption related functions together. The main
rbdVolume object should not be cluttered with KMS or DEK procedures.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
For NodeUnstageVolume its a two step process,
first unmount the volume and than unmap the volume.
Currently, we are logging only after rbd unmapping is done.
sometimes it becomes difficult to debug with above logging
whether more time is spent in unmount or unmap.
This commits adds one more debug log after unmount is done.
with this we can identify where exactly more time is spent
by looking at the logs.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
When a volume was provisioned by an old Ceph-CSI provisioner, the
metadata of the RBD image will contain `requiresEncryption` to indicate
a passphrase needs to be created. New Ceph-CSI provisioners create the
passphrase in the CreateVolume request, and set `encryptionPrepared`
instead.
When a new node-plugin detects that `requiresEncryption` is set in the
RBD image metadata, it will fallback to the old behaviour.
In case `encryptionPrepared` is read from the RBD image metadata, the
passphrase is used to cryptsetup/format the image.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Have the provisioner create the passphrase for the volume, instead of
doign it lazily at the time the volume is used for the 1st time. This
prevents potential races where pods on different nodes try to store
different passphrases at the (almost) same time.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
mount packges is moved from
k8s.io/utils/mount to a new repository
k8s.io/mount-utils. updated code to use
the same.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
volJournal.Connect() got the error on err2 variable, however
the return was on variable err which hold the error return of
DecomposeCSIID() which is wrong. This cause the error return wrongly
parsed and pushed from the caller. From now on, we are reusing the
err variable to hold and revert the error of volJournal.Connect().
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
Form kubernetes v1.19 onwards NodeRequest is getting volume path
in StagingTargetPath instead of VolumePath, cephcsi should also
use the same.
Signed-off-by: Mudit Agarwal <muagarwa@redhat.com>
At CSI spec < 1.2.0, there was no volumecapability in the
expand request. However its available from v1.2+ which allows
us to declare the node operations based on the volume mode.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
Make sure to operate within the namespace if any given
when dealing with rbd images and snapshots and their journals.
Signed-off-by: Mehdy Khoshnoody <mehdy.khoshnoody@gmail.com>
Current versions of the mkfs.xfs binary enable reflink support by
default. This causes problems on systems where the kernel does not
support this feature. When the kernel the feature does not support, but
the filesystem has it enabled, the following error is logged in `dmesg`:
XFS: Superblock has unknown read-only compatible features (0x4) enabled
Introduce a check to see if mkfs.xfs supports the `-m reflink=` option.
In case it does, pass `-m reflink=0` while creating the filesystem.
The check is executed once during the first XFS filesystem creation. The
result of the check is cached until the nodeserver restarts.
Fixes: #966
Signed-off-by: Niels de Vos <ndevos@redhat.com>
This change replaces the sentinel errors in rbd module with
standard errors created with errors.New().
Related: #1203
Signed-off-by: Sven Anderson <sven@redhat.com>
Direct usage of numbers should be avoided.
Issue reported:
mnd: Magic number: X, in <argument> detected (gomnd)
Signed-off-by: Yug <yuggupta27@gmail.com>
Add explanation to nolint directives.
Issue reported:
whyNoLint: include an explanation for nolint directive (gocritic)
Signed-off-by: Yug <yuggupta27@gmail.com>
as v1.0.0 is deprecated we need to remove the support
for it in the Next coming (v3.0.0) release. This PR
removes the support for the same.
closes#882
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Added support for RBD PVC to PVC cloning, below
commands are executed to create a PVC-PVC clone from
RBD side.
* Check the depth(n) of the cloned image if n>=(hard limit -2)
or ((soft limit-2) Add a task to flatten the image and return
about (to avoid image leak) **Note** will try to flatten the
temp clone image in the chain if available
* Reserve the key and values in omap (this will help us to
avoid the leak as it's not reserved earlier as we have returned
ABORT (the request may not come back))
* Create a snapshot of rbd image
* Clone the snapshot (temp clone)
* Delete the snapshot
* Snapshot the temp clone
* Clone the snapshot (final clone)
* Delete the snapshot
```bash
1) check the image depth of the parent image if flatten required
add a task to flatten image and return ABORT to avoid leak
(hardlimit-2 and softlimit-2 check will be done)
2) Reserve omap keys
2) rbd snap create <RBD image for src k8s volume>@<random snap name>
3) rbd clone --rbd-default-clone-format 2 --image-feature
layering,deep-flatten <RBD image for src k8s volume>@<random snap>
<RBD image for temporary snap image>
4) rbd snap rm <RBD image for src k8s volume>@<random snap name>
5) rbd snap create <cloned RBD image created in snapshot process>@<random snap name>
6) rbd clone --rbd-default-clone-format 2 --image-feature <k8s dst vol config>
<RBD image for temporary snap image>@<random snap name> <RBD image for k8s dst vol>
7)rbd snap rm <RBD image for src k8s volume>@<random snap name>
```
* Delete temporary clone image created as part of clone(delete if present)
* Delete rbd image
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
as RHEL 8.2 supports the deep-flatten
feature, added it to the list to map
the rbd images on the node without flattening.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
as v5.1.0 supports the deep-flatten feature,lowering
the required version to map rbd images which
are having deep-flatten feature
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
added skipForceFlatten flag to skip
the image deptha and skip image flattening.
This will be very useful if the kernel is
not listed in cephcsi which supports deep
flatten fauture.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
if the PVC access mode is ReadOnlyMany
or single node readonly, mounting the rbd
device path to the staging path as readonly
to avoid the write operation.
If the PVC acccess mode is readonly, mapping
rbd images as readonly.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
There is a bug in current code where the devicePath
is always empty and the rbd image unmap never
happens if nodeplugin fails to mount the rbd image
to the stagingpath.
This is a fix to unmap the rbd image if some issue
occurs after rbd image is mapped.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
When mounting fails, the node-plugin should give a suggestion to check the
kernel logs so that users can report problems better.
Edited the existing log to include the message in both rbd and cephfs.
Fixes: https://github.com/ceph/ceph-csi/issues/1006
Signed-off-by: Mudit Agarwal <muagarwa@redhat.com>
