During PVC snapshot/clone both kms config and passphrase needs to copied,
while for PVC restore only passphrase needs to be copied to dest rbdvol
since destination storageclass may have another kms config.
Signed-off-by: Rakshith R <rar@redhat.com>
(cherry picked from commit 59b7a26175)
This commit adds capability to genVolFromVolumeOptions() to fetch
mapped clusted-id & mon ips for mirrored PVC on secondary cluster
which may have different cluster-id.
This is required for NodeStageVolume().
We also don't need to check for mapping during volume create requests,
so it can be disabled by passing a bool checkClusterIDMapping as false.
GetMonsAndClusterID() is modified to accept bool checkClusterIDMapping
based on which clustermapping is checked to fetch mapped cluster-id and
mon-ips.
Signed-off-by: Rakshith R <rar@redhat.com>
(cherry picked from commit 9d1e98ca60)
If the image is in a secondary state and its
up+replaying means its an healthy secondary
and the image is primary somewhere in the remote cluster
and the local image is getting replayed. Delete the
OMAP data generated as we cannot delete the
secondary image. When the image on the primary
cluster gets deleted/mirroring disabled, the image on
all the remote (secondary) clusters will get
auto-deleted. This helps in garbage collecting
the OMAP, PVC and PV objects after failback operation.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
(cherry picked from commit 5562e46d0f)
This commit fixes snapshot id idempotency issue by
always returning an error when flattening is in progress
and not using `readyToUse:false` response.
Signed-off-by: Rakshith R <rar@redhat.com>
(cherry picked from commit 825211730c)
Volume generated from snap using genrateVolFromSnap
already copies volume ID correctly, therefore removing
`vol.VolID = rbdVol.VolID` which wrongly copies parent
Volume ID instead leading to error from copyEncryption()
on parent and clone volume ID being equal.
Signed-off-by: Rakshith R <rar@redhat.com>
(cherry picked from commit 08728b631b)
Previously in ControllerExpandVolume() we had a check for encrypted
volumes and we use to fail for all expand requests on an encrypted
volume. Also for Block VolumeMode PVCs NodeExpandVolume used to be
ignored/skipped.
With these changes, we add support for the expansion of encrypted volumes.
Also for raw Block VolumeMode PVCs with Encryption we call NodeExpandVolume.
That said,
With LUKS1, cryptsetup utility doesn't prompt for a passphrase on resizing
the crypto mapper device. This is because LUKS1 devices don't use kernel
keyring for volume keys.
Whereas, LUKS2 devices use kernel keyring for volume key by default, i.e.
cryptsetup utility asks for a passphrase if it detects volume key was
previously passed to dm-crypt via kernel keyring service, we are overriding
the default by --disable-keyring option during cryptsetup open command.
So that at the time of crypto mapper device resize we will not be
prompted for any passphrase.
Fixes: #1469
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
nlreturn linter requires a new line before return
and branch statements except when the return is alone
inside a statement group (such as an if statement) to
increase code clarity. This commit addresses such issues.
Updates: #1586
Signed-off-by: Rakshith R <rar@redhat.com>
We have many declarations and invocations..etc with long lines which are
very difficult to follow while doing code reading. This address the issues
in 'internal/rbd/*server.go' and 'internal/rbd/driver.go' files to restrict
the line length to 120 chars.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
This commit adds checks for missing `imageFeatures` parameter
in createvolumerequest and nodestagerequest(only for static PVs).
Missing `imageFeatures` parameter is ignored in case of non-static
PVs to ensure backwards compatibility with older versions which
did not have `imageFeatures` as required parameter.
Signed-off-by: Rakshith R <rar@redhat.com>
When cloning a volume from a (CSI) snapshot, we use DeepCopy() and do
not need an RBD snapshot as source.
Suggested-by: Madhu Rajanna <madhupr007@gmail.com>
Signed-off-by: Niels de Vos <ndevos@redhat.com>
In case restoring a snapshot of a thick-PVC failed during DeepCopy(),
the image will exist, but have partial contents. Only when the image has
the thick-provisioned metadata set, it has completed DeepCopy().
When the metadata is missing, the image is deleted, and an error is
returned to the caller. Kubernetes will automatically retry provisioning
on the ABORTED error, and the restoring will get restarted from the
beginning.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
the parent volume(CreateVolume) and the clone volume
(CreateSnapshot) are both indepedent and parent volume
can be deleted anytime. To check the thick provision
during Snapshot restore(CreateVolume from snapshot)
we need the thick provision metadata so for the same
reason setting the thick provision metadata on the
clone image we are creating at the CreateSnapshot time.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
added validation to allow only Restore of Thick PVC
snapshot to a thick clone and creation of thick clone
from thick PVC.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
In case cloning a thick-PVC failed during DeepCopy(), the image will
exist, but have partial contents. Only when the image has the
thick-provisioned metadata set, it has completed DeepCopy().
When the metadata is missing, the image is deleted, and an error is
returned to the caller. Kubernetes will automatically retry provisioning
on the ABORTED error, and the cloning will get restarted from the
beginning.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Thick-provisioned images are independent, cloned images or snapshots are
deep-flattened during creation. There is no need to try and flatten them
again.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
This commit addresses the following issue:
'nolint:gocyclo // complexity needs to be reduced.'
is unused for linter "gocyclo" (nolintlint)
Updates:#2025
Signed-off-by: Yati Padia <ypadia@redhat.com>
Validate Snapshot request to check if the
passed pool name is not empty.
Co-authored-by: Madhu Rajanna <madhupr007@gmail.com>
Signed-off-by: Yug <yuggupta27@gmail.com>
as we are supporting the creation of clone to a new
pool we need to pass the correct parent volume
to cleanup the snapshot on parent volume.
Co-authored-by: Madhu Rajanna <madhupr007@gmail.com>
Signed-off-by: Yug <yuggupta27@gmail.com>
added support to create image in different pool.
if the snapshot/rbd image exists in one pool we
can create a clone the clone of the rbd image to
a different pool.
Co-authored-by: Madhu Rajanna <madhupr007@gmail.com>
Signed-off-by: Yug <yuggupta27@gmail.com>
CreateVolume will fail in below cases
* If the snapshot is encrypted and requested volume
is not encrypted
* If the snapshot is not encrypted and requested
volume is encrypted
* If the parent volume is encrypted and requested volume
is not encrypted
* If the parent volume is not encrypted and requested
volume is encrypted
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Move the repairing of a volume/snapshot from CreateVolume to its own
function. This reduces the complexity of the code, and makes the
procedure easier to understand. Further enhancements to repairing an
exsiting volume can be done in the new function.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
This commit removes calling of .String() when logging
since `%s`,`%v` or `%q` will call an existing .String() function
automatically.
Fixes: #2051
Signed-off-by: Rakshith R <rar@redhat.com>
At present we return the volume connect error if the clone
from snapshot fails when rbdvolume is encrypted, which is incorrect.
This patch correctly return the failed copy encryption error to the
caller
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
It is possible that when a provisioner restarts after a snapshot was
cloned, but before the newly restored image had its encryption metadata
set, the new image is not marked as encrypted. This will prevent
attaching/mounting the image, as the encryption key will not be fetched,
or is not available in the DEKStore.
By actively repairing the encryption configuration when needed, this
problem should be addressed.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
buildCreateVolumeResponse() exists exactly for the need to create a
csi.CreateVolumeResponse based on an rbdVolume. Calling this helper
reduces the code duplication in CreateVolume().
Signed-off-by: Niels de Vos <ndevos@redhat.com>
The rbdVolume that needs its encryption configured is constructed in the
Exists() method. It is suitable to move the copyEncryptionConfig() call
there as well, so that the object is completely constructed in a single
place.
Golang-ci:gocyclo complained about the increased complexity of the
Exists() function. Moving the repairing of the ImageID into its own
helper function makes the code a little easier to understand.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Introduce helper function cloneFromSnapshot() that takes care of the
procedures that are needed when an existing snapshot has been found.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Without this, the rbdVolume can not connect to the Ceph cluster and
configure the (optional) encryption.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
The ControllerServer should not need to care about support for
encryption, ideally it is transparantly handled by the rbdVolume type
and its internal API.
Deleting the DEK was one of the last remainders that was explicitly done
inside the ControllerServer.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
added ReplicationServer struct for the replication related
operation it also embed the ControllerServer which
already implements the helper functions like locking/unlocking etc.
removed getVolumeFromID and cleanup functions for better
code readability and easy maintaince.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
The rbdSnapshot and rbdVolume structs have many common attributes. In
order to combine these into an rbdImage struct that implements shared
functionality, having the same attribute for the ID makes things much
easier.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Use DEKStore API for Fetching and Storing passphrases.
Drop the fallback for the old KMS interface that is now provided as
DEKStore. The original implementation has been re-used for the DEKStore
interface.
This also moves GetCryptoPassphrase/StoreNewCryptoPassphrase functions
to methods of VolumeEncryption.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Prepare for grouping encryption related functions together. The main
rbdVolume object should not be cluttered with KMS or DEK procedures.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Add an option to the StorageClass to support creating fully allocated
(thick provisioned) RBD images
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Signed-off-by: Niels de Vos <ndevos@redhat.com>
This adds internal/rbd/encryption.go which will be used to include other
encryption functionality to support additional KMS related functions. It
will work together with the shared API from internal/util/kms.go.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Have the provisioner create the passphrase for the volume, instead of
doign it lazily at the time the volume is used for the 1st time. This
prevents potential races where pods on different nodes try to store
different passphrases at the (almost) same time.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
