Previously in ControllerExpandVolume() we had a check for encrypted
volumes and we use to fail for all expand requests on an encrypted
volume. Also for Block VolumeMode PVCs NodeExpandVolume used to be
ignored/skipped.
With these changes, we add support for the expansion of encrypted volumes.
Also for raw Block VolumeMode PVCs with Encryption we call NodeExpandVolume.
That said,
With LUKS1, cryptsetup utility doesn't prompt for a passphrase on resizing
the crypto mapper device. This is because LUKS1 devices don't use kernel
keyring for volume keys.
Whereas, LUKS2 devices use kernel keyring for volume key by default, i.e.
cryptsetup utility asks for a passphrase if it detects volume key was
previously passed to dm-crypt via kernel keyring service, we are overriding
the default by --disable-keyring option during cryptsetup open command.
So that at the time of crypto mapper device resize we will not be
prompted for any passphrase.
Fixes: #1469
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
With Luks1 device:
$ cryptsetup status /dev/mapper/crypto-rbd0
/dev/mapper/crypto-rbd0 is active and is in use.
type: LUKS1
cipher: aes-xts-plain64
keysize: 512 bits
key location: dm-crypt
device: /dev/rbd0
sector size: 512
offset: 4096 sectors
size: 4190208 sectors
mode: read/write
With Luks2 device:
$ cryptsetup status /dev/mapper/crypto-rbd0
/dev/mapper/crypto-rbd0 is active and is in use.
type: LUKS2
cipher: aes-xts-plain64
keysize: 512 bits
key location: dm-crypt
device: /dev/rbd0
sector size: 512
offset: 32768 sectors
size: 4161536 sectors
mode: read/write
This could lead to failures with unmap in the NodeUnstageVolume path
for the encrypted volumes.
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
This commit modifies the error of godot, cyclop,
paralleltest linter caused due to merged PRs.
Updates: #1586
Signed-off-by: Yati Padia <ypadia@redhat.com>
This commit disables the forbidigo linter as
this linter forbids the use of fmt.Printf
but we need to use it in various part of
our codebase.
Updates: #1586
Signed-off-by: Yati Padia <ypadia@redhat.com>
This commit disables the exhaustivestruct linter
as it is meant to be used only for special cases.
We don't need to enable this for our project.
Fixes: #2224
Signed-off-by: Yati Padia <ypadia@redhat.com>
This PR updates the static check tools to
the latest version.
Further needs to resolve all the errors after
updating the version.
Updates: #1586
Signed-off-by: Yati Padia <ypadia@redhat.com>
At present while acquiring the deleteLock on the volume, we check
for ongoing clone and snapshot creation operations on the same.
Considering snapshot and clone controllers does not allow parent
volume deletion on subjected operations, we can be free from this
extra check.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
It seems that the version of the key/value engine can not always be
detected for Hashicorp Vault. In certain cases, it is required to
configure the `VAULT_BACKEND` (or `vaultBackend`) option so that a
successful connection to the service can be made.
The `kv-v2` is the current default for development deployments of
Hashicorp Vault (what we use for automated testing). Production
deployments default to version 1 for now.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
This change resolves a typo for installing the CSIDriver
resource in Kubernetes clusters before 1.18,
where the apiVersion is incorrect.
See also:
https://kubernetes-csi.github.io/docs/csi-driver-object.html
[ndevos: replace v1betav1 in examples with v1beta1]
Signed-off-by: Thomas Kooi <t.j.kooi@avisi.nl>
nlreturn linter requires a new line before return
and branch statements except when the return is alone
inside a statement group (such as an if statement) to
increase code clarity. This commit addresses such issues.
Updates: #1586
Signed-off-by: Rakshith R <rar@redhat.com>
Sometimes there are failures in the e2e suite when connecting to the
etcdserver fails. The following error was caught:
INFO: Error getting pvc "rbd-pvc" in namespace "rbd-1318": Get "https://192.168.39.222:8443/api/v1/namespaces/rbd-1318/persistentvolumeclaims/rbd-pvc": dial tcp 192.168.39.222:8443: connect: connection refused
FAIL: failed to create PVC with error failed to get pvc: Get "https://192.168.39.222:8443/api/v1/namespaces/rbd-1318/persistentvolumeclaims/rbd-pvc": dial tcp 192.168.39.222:8443: connect: connection refused
If etcdserver was only briefly unavailable, one or more retries might be
sufficient to have the test pass.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Since kubernetes 1.16 clone ( create a new volume from exisiing volume)
functionality is at Beta state and kubernetes v1.18, the snapshot functionality
has been lifted to GA. Ceph CSI drivers have been supporting this feature
for last few releases and users are heavily using this feature since then.
We also have good amount of e2e test case which cover volume creation
from PVC backend or iow, PVC as a datasource. With that, this PR
proposes of lifting this feature support to Beta with v3.4.0 version.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
Since kubernetes 1.17 snapshot functionality is at Beta state
and external snapshotter 3.0.3. Since v4.0.0 of snapshotter controller
and kubernetes v1.20, the snapshot functionality has been lifted to GA.
Ceph CSI drivers have been supporting this feature for last few releases
and users are heavily using this feature since then.
We also have good amount of e2e test case which cover volume creation
from snapshot backend or iow, snapshot as a datasource. With that, this PR
proposes of lifting this feature support to Beta with v3.4.0 version.
Updates# https://github.com/ceph/ceph-csi/issues/2199
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
Since kubernetes 1.17 snapshot functionality is at Beta state
and external snapshotter 3.0.3. Since v4.0.0 of snapshotter controller
and kubernetes v1.20, the snapshot functionality has been lifted to GA.
Ceph CSI drivers have been supporting this feature for last few releases
and users are heavily using this feature since then.
We also have good amount of e2e test case which cover volume creation
from snapshot backend or iow, snapshot as a datasource. With that, this PR
proposes of lifting this feature support to Beta with v3.4.0 version.
Updates# https://github.com/ceph/ceph-csi/issues/2199
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
we have volume PV metrics support available in our driver along
with the grpc metrics support (EnableGRPCMetrics) we added in between
for csi operations. The latter is getting deprecated and the current
mention in the support matrix on metrics support confuse many.
This PR explictly mention this support in the docs to volume/PV metrics
This PR also add a seperate row for block mode PV metrics
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
In addition to the single ServiceAccount KMS support for Hashicorp
Vault, Ceph-CSI can now use a ServiceAccount per Tenant as well. This
adds the user-documentation with references to the example deployment
files.
Closes: #2222
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Sometimes it happens that the deployment of Hashicorp Vault fails.
Deployment is one of the 1st steps that are done when starting the e2e
suite, and the Kubernetes cluster may still be a little overloaded while
it is settling down. It should be possible to retry and succeed after a
while.
Fixes: #2288
Signed-off-by: Niels de Vos <ndevos@redhat.com>
This commit resolves errorlint issues
which checks for the code that will cause
problems with the error wrapping scheme.
Updates: #1586
Signed-off-by: Yati Padia <ypadia@redhat.com>
revive linter checks for var-declaration
format.
For example:
"e2e/rbd_helper.go:441:36: var-declaration:
should drop = nil from declaration of
var noPVCValidation; it is the zero value (revive)
var noPVCValidation validateFunc = nil"
Updates: #1586
Signed-off-by: Yati Padia <ypadia@redhat.com>
snapshot controller make sure the pvc which is the source for the
snapshot request wont get deleted while snapshot is getting created,
so we dont need to check for any ongoing delete operation here on the
volume.
Subjected code path in snapshot controller:
```
pvc, err := ctrl.getClaimFromVolumeSnapshot(snapshot)
.
..
pvcClone.ObjectMeta.Finalizers = append(pvcClone.ObjectMeta.Finalizers, utils.PVCFinalizer)
_, err = ctrl.client.CoreV1().PersistentVolumeClaims(pvcClone.Namespace).Update(..)
```
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
warnings from golangci-lint:
e2e/pod.go:207:122: directive `//nolint:unparam,lll // cn can be used
with different inputs later` is unused for linter unparam (nolintlint)
func execCommandInContainer(f *framework.Framework, c, ns, cn string,
opt *metav1.ListOptions) (string, string, error) { //nolint:unparam,lll
// cn can be used with different inputs later
e2e/pod.go:307:70: directive `//nolint:unparam // skipNotFound can be
used with different inputs later` is unused for linter unparam (nolintlint)
func deletePodWithLabel(label, ns string, skipNotFound bool) error {
//nolint:unparam // skipNotFound can be used with different inputs later
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Now that the healer functionaity for mounter processes is available,
lets start, using it.
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Problem:
-------
For rbd nbd userspace mounter backends, after a restart of the nodeplugin
all the mounts will start seeing IO errors. This is because, for rbd-nbd
backends there will be a userspace mount daemon running per volume, post
restart of the nodeplugin pod, there is no way to restore the daemons
back to life.
Solution:
--------
The volume healer is a one-time activity that is triggered at the startup
time of the rbd nodeplugin. It navigates through the list of volume
attachments on the node and acts accordingly.
For now, it is limited to nbd type storage only, but it is flexible and
can be extended in the future for other backend types as needed.
From a few feets above:
This solves a severe problem for nbd backed csi volumes. The healer while
going through the list of volume attachments on the node, if finds the
volume is in attached state and is of type nbd, then it will attempt to
fix the rbd-nbd volumes by sending a NodeStageVolume request with the
required volume attributes like secrets, device name, image attributes,
and etc.. which will finally help start the required rbd-nbd daemons in
the nodeplugin csi-rbdplugin container. This will allow reattaching the
backend images with the right nbd device, thus allowing the applications
to perform IO without any interruptions even after a nodeplugin restart.
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Nodeplugin needs below cluster roles:
persistentvolumes: get
volumeattachments: list, get
These additional permissions are needed by the volume healer. Volume healer
aims at fixing the volume health issues at the very startup time of the
nodeplugin. As part of its operations, volume healer has to run through
the list of volume attachments and understand details about each
persistentvolume.
The later commits will use these additional cluster roles.
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
As part of stage transaction if the mounter is of type nbd, then capture
device path after a successful rbd-nbd map.
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
clone controller make sure there is no delete operation happens
on the source PVC which has been referred as the datasource of
clone PVC, we are safe to operate without looking at delete
operation lock in this case.
Subjected code in the controller:
...
if claim.Spec.DataSource != nil && rc.clone {
err = p.setCloneFinalizer(ctx, claim)
...
}
if !checkFinalizer(claim, pvcCloneFinalizer) {
claim.Finalizers = append(claim.Finalizers, pvcCloneFinalizer)
_, err := p.client.CoreV1().PersistentVolumeClaims(claim.Namespace).Update(..claim..)
}
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
Considering kubelet make sure the stage and publish operations
are serialized, we dont need any extra locking in nodePublish
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
Considering kubelet make sure the stage and publish operations
are serialized, we dont need any extra locking in nodePublish
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
Considering kubelet make sure the unstage and unpublish operations
are serialized, we dont need any extra locking in nodeUnpublish
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
Considering kubelet make sure the unstage and unpublish operations
are serialized, we dont need any extra locking in nodeUnpublish
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
Minikube has bumped it's support for latest Kubernetes version to
1.22.0-beta.0. This might improve our CI jobs with Kubernetes 1.22 too.
See-also: https://github.com/kubernetes/minikube/releases/tag/v1.22.0
Signed-off-by: Niels de Vos <ndevos@redhat.com>
When an error occurs, the pvc object is overwritten in the
PollImmediate() loop. Re-using the pvc.Namespace results in error
messages like
Error getting pvc in namespace: '': an empty namespace may not be set when a resource name is provided
and prevents the retry by PollImmediate() to never succeed. Storing the
namespace in a local variable prevents this from happening.
Reported-by: Rakshith R <rar@redhat.com>
Signed-off-by: Niels de Vos <ndevos@redhat.com>
