This PR makes the changes in csi templates and
upgrade documentation required for updating
csi sidecar images.
Signed-off-by: Mudit Agarwal <muagarwa@redhat.com>
Just like deploy-rook and teardown-rook, this patch will add
install snapshotter and cleanup snapshotter option to minikube
script.
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Instead of using the Docker command to push the image to to minikube VM,
read the image from stdin over ssh and load it with the Docker command
that is available inside the VM.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Allow passing:
$ CONTAINER_CMD="sudo docker" ./scripts/minikube.sh cephcsi
or
$ CONTAINER_CMD="sudo podman" ./scripts/minikube.sh cephcsi
Because the container images could list in '# sudo docker images' or
'# sudo podman images' incase if the Makefile target image-cephcsi is
run with sudo
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Add a way to supply local CONTAINER_CMD option of choice via
env variable to minikube.sh
Note: we still use docker daemon env at minikube box, in the future
we can switch to podman service env '# minikube podman-env' if needed
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Problem:
-------
$ minikube version
minikube version: v1.12.2
commit: be7c19d391302656d27f1f213657d925c4e1cfc2-dirty
$ ./scripts/minikube.sh up
installed minikube version v1.12.2 is not matching requested version latest
Here v1.12.2 is the latest version of minikube, but the script simply bails out.
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
In this script we defined all the functions at the top and then started
with executable commands (entry points to script start).
Only this function is odd in the script unlike the rest of them, defined
in between the execution sequence taking away the readability.
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
By default minikube uses 2 CPUs, which might be too little for some of
the tests. When not passing a CPUS environment variable, use all CPUs
available on the system (detected with 'nproc').
Signed-off-by: Niels de Vos <ndevos@redhat.com>
minikube has /sbin/losetup from Busybox, and that does not work with
raw-block PVCs. Use the losetup executable from the host in the VM
instead.
See-also: kubernetes/minikube#8284
Signed-off-by: Niels de Vos <ndevos@redhat.com>
While testing with tehj default 3000 MB RAM in the minikube VM, creating
a encrypted RBD volume fails because 'cryptsetup' gets killed:
[ 766.072585] Out of memory: Kill process 18497 (cryptsetup) score 1182 or sacrifice child
[ 766.072589] Killed process 18497 (cryptsetup) total-vm:863136kB, anon-rss:510336kB, file-rss:10788kB, shmem-rss:0kB
[ 766.072688] oom_reaper: reaped process 18497 (cryptsetup), now anon-rss:510336kB, file-rss:10780kB, shmem-rss:0kB
Using 4 GB RAM should prevent this from occuring.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
In case kubectl did not get installed (VM_DRIVER != none),
scripts/minikube.sh can fail when kubectl is not in the path. By running
the "kubectl cluster-info" command through minikube, the script will
succeed.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
In case there is a minikube executable in the $PATH already, use that
for all commands. If there is none, install_minikube() will place a
newly downloaded executable in /usr/local/bin which will be used by the
full pathname, so that commands as root without /usr/local/bin in the
$PATH will work.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
The command fails when PWD=/. It is unclear what the command tries to
achieve. The next command does something more useful, although it can
maybe be removed as well.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
When starting minikube as root with --driver=kvm2, minikube complains
that this is not the right thing to do. However, in the CentOS CI we
really want to run as root, as that makes the scripts simpler.
Add the --force option while starting, so that minikube does not abort
anymore.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Storage providers and the default storage class is not needed for
Ceph-CSI testing. In order to reduce resources and potential conflicts
between storage plugins, disable them.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
With minikube versions greater than 1.6.2 and less than 1.11.1, the YAML files
minikube path will not be automatically applied to the cluster. we will get
errors during bootstrap of the cluster if the admission controller is enabled.
To use Pod Security Policies with these versions of minikube, first start a
cluster without the `PodSecurityPolicy` admission controller enabled.
Next, apply the psp yaml. and stop the cluster and then restart it
with the admission controller enabled.
```
minikube start
kubectl apply -f /path/to/psp.yaml
minikube stop
minikube start --extra-config=apiserver.enable-admission-plugins=PodSecurityPolicy
```
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
In some Linux distributions the /etc/resolv.conf file is a symlink. This
file gets included in the Kubernetes containers and will be used for
resolving hostnames. By including the symlink, it is possible that that
target file is not available in the container(s). This will cause
problems when resolving hostnames, and Kubernetes will not get deployed.
The default minikube VM provides /run/systemd/resolve/resolv.conf, with
/etc/resolv.conf being a symlink. Therefor, it is needed to pass the
`--extra-config=kubelet.resolv-conf=..` parameter to `kubeadm`.
In case minikube is started with `--vm-driver=none` and
/run/systemd/resolve/resolv.conf does not exist, the local
/etc/resolv.conf will be used for inclusion in the Kubelet container. If
this is a symlink, the final destination should get passed with
`--extra-config=kubelet.resolv-conf=..` so that a working hostname
resolution configuration is available in the container.
Updates: #1121
Signed-off-by: Niels de Vos <ndevos@redhat.com>
- This commit adds tests only for RBD, as CephFS still needs
an enhancement in CephFS subvolume commands to effectively use
topology based provisioning
Signed-off-by: ShyamsundarR <srangana@redhat.com>
Recently resizer 0.5.0 has been released.
This PR updated the resizer container from
v0.4.0 to v0.5.0
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Update CI merge job to build and push Arm64 image to
quay.io/cephcsi/cephcsi:version-arm64.
Add CI PR job running on Travis Arm64 nodes to make sure cephcsi
compiles successfully on Arm64.
No CI test job is availabe for Arm64 now due to below issues
- k8s-csi sidecar images for Arm64 are not available
- Travis Arm64 CI job runs inside unprivileged LXD which blocks
launching minikube test environment
Signed-off-by: Yibo Cai <yibo.cai@arm.com>
We have the e2e test with --deploy-rook=true that makes all test
environment. It works fine, but It does not seem to be the role of
e2e test. In addition, when developing the code we need to run full
test scenario with deploying rook every time, or we need to build
rook environment by hand. Move rook-deploy code to minikube.sh.
RBD plugin needs only a single ID to manage images and operations against a
pool, mentioned in the storage class. The current scheme of 2 IDs is hence not
needed and removed in this commit.
Further, unlike CephFS plugin, the RBD plugin splits the user id and the key
into the storage class and the secret respectively. Also the parameter name
for the key in the secret is noted in the storageclass making it a variant and
hampers usability/comprehension. This is also fixed by moving the id and the key
to the secret and not retaining the same in the storage class, like CephFS.
Fixes#270
Testing done:
- Basic PVC creation and mounting
Signed-off-by: ShyamsundarR <srangana@redhat.com>
update travis and makefile for functional test
skip docker pull if image is already present
on local machine.
if the image is not present locally pull the
image from repo.
export kubeconfig in travis
build cephcsi image in travis job for
functional testing
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
