The kmsConfig type in the e2e suite has been enhanced with two functions
that make it possible to validate the destruction of deleted keys.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
By using retryKubectl helper function,
a retry will be done, and the known error
messages will be skipped.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
this provides caller ability to pass the arguments
like ignore-not-found=true etc when executing
the kubectl commands.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
added isAlreadyExistsCLIError to check for known error.
if error is already exists we are considering it
as a success.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
expandPVCSize() uses the namespace of the PVC that was checked. In case
the .Get() call fails, the PVC will not have its namespace set, and
subsequent tries will fail with errors like:
Error getting pvc in namespace: '': etcdserver: request timed out
waiting for PVC (9 seconds elapsed)
Error getting pvc in namespace: '': an empty namespace may not be set when a resource name is provided
By using the original namespace of the PVC stored in a separate variable
as is done with the name of the PVC, this problem should not occur
anymore.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
In case listing the Kubernetes Services fails, the following error is
returned immediately:
failed to create configmap with error failed to list services: etcdserver: request timed out
Wrapping the listing of the Services in a PollImmediate() routine, adds
a retry in case of common temporary issues.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
registry.centos.org is not officially maintained by the CentOS
infrastructure team. The container images on quay.io are the official
once and we should use those instead.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Until we have a real fix, just to avoid occasionally file system entering
into read-only on nodeplugin restart, lets sync data from the application
pod.
Updates: #2204
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
There are reports where CephFS deploying failed with etcdserver
timeouts:
INFO: Running '/usr/bin/kubectl --server=https://192.168.39.187:8443 --kubeconfig=/root/.kube/config --namespace=cephcsi-e2e-ea434921 create --namespace=cephcsi-e2e-ea434921 -f -'
INFO: rc: 1
FAIL: failed to create CephFS provisioner rbac with error error running /usr/bin/kubectl --server=https://192.168.39.187:8443 --kubeconfig=/root/.kube/config --namespace=cephcsi-e2e-ea434921 create --namespace=cephcsi-e2e-ea434921 -f -:
Command stdout:
role.rbac.authorization.k8s.io/cephfs-external-provisioner-cfg created
rolebinding.rbac.authorization.k8s.io/cephfs-csi-provisioner-role-cfg created
stderr:
Error from server: error when creating "STDIN": etcdserver: request timed out
Error from server: error when creating "STDIN": etcdserver: request timed out
Error from server: error when creating "STDIN": etcdserver: request timed out
error:
exit status 1
By using retryKubectlInput() helper function, a retry will be done, and
the failure should not be fatal any longer.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
RBD image metadata keys that start with '.rbd' are expected to be
internal to RBD itself and are not mirrored to remote sites. Renaming
the keys (dropping the '.' prefix) and using the new MigrateMetadata()
function now makes the keys available on remote sites too.
Closes: #2219
Signed-off-by: Niels de Vos <ndevos@redhat.com>
framework.RunKubectl() returns an error that does not end with
"etcdserver: request timed out", but contains the text somewhere in the
middle:
error running /usr/bin/kubectl --server=https://192.168.39.57:8443 --kubeconfig=/root/.kube/config --namespace=cephcsi-e2e-a44ec4b4 create -f -:
Command stdout:
stderr:
Error from server: error when creating "STDIN": etcdserver: request timed out
error:
exit status 1
isRetryableAPIError() should return `true` for this case as well, so
instead of using HasSuffix(), we'll use Contains().
Signed-off-by: Niels de Vos <ndevos@redhat.com>
This commit modifies the error of godot, cyclop,
paralleltest linter caused due to merged PRs.
Updates: #1586
Signed-off-by: Yati Padia <ypadia@redhat.com>
nlreturn linter requires a new line before return
and branch statements except when the return is alone
inside a statement group (such as an if statement) to
increase code clarity. This commit addresses such issues.
Updates: #1586
Signed-off-by: Rakshith R <rar@redhat.com>
Sometimes there are failures in the e2e suite when connecting to the
etcdserver fails. The following error was caught:
INFO: Error getting pvc "rbd-pvc" in namespace "rbd-1318": Get "https://192.168.39.222:8443/api/v1/namespaces/rbd-1318/persistentvolumeclaims/rbd-pvc": dial tcp 192.168.39.222:8443: connect: connection refused
FAIL: failed to create PVC with error failed to get pvc: Get "https://192.168.39.222:8443/api/v1/namespaces/rbd-1318/persistentvolumeclaims/rbd-pvc": dial tcp 192.168.39.222:8443: connect: connection refused
If etcdserver was only briefly unavailable, one or more retries might be
sufficient to have the test pass.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Sometimes it happens that the deployment of Hashicorp Vault fails.
Deployment is one of the 1st steps that are done when starting the e2e
suite, and the Kubernetes cluster may still be a little overloaded while
it is settling down. It should be possible to retry and succeed after a
while.
Fixes: #2288
Signed-off-by: Niels de Vos <ndevos@redhat.com>
This commit resolves errorlint issues
which checks for the code that will cause
problems with the error wrapping scheme.
Updates: #1586
Signed-off-by: Yati Padia <ypadia@redhat.com>
revive linter checks for var-declaration
format.
For example:
"e2e/rbd_helper.go:441:36: var-declaration:
should drop = nil from declaration of
var noPVCValidation; it is the zero value (revive)
var noPVCValidation validateFunc = nil"
Updates: #1586
Signed-off-by: Yati Padia <ypadia@redhat.com>
warnings from golangci-lint:
e2e/pod.go:207:122: directive `//nolint:unparam,lll // cn can be used
with different inputs later` is unused for linter unparam (nolintlint)
func execCommandInContainer(f *framework.Framework, c, ns, cn string,
opt *metav1.ListOptions) (string, string, error) { //nolint:unparam,lll
// cn can be used with different inputs later
e2e/pod.go:307:70: directive `//nolint:unparam // skipNotFound can be
used with different inputs later` is unused for linter unparam (nolintlint)
func deletePodWithLabel(label, ns string, skipNotFound bool) error {
//nolint:unparam // skipNotFound can be used with different inputs later
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Now that the healer functionaity for mounter processes is available,
lets start, using it.
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
When an error occurs, the pvc object is overwritten in the
PollImmediate() loop. Re-using the pvc.Namespace results in error
messages like
Error getting pvc in namespace: '': an empty namespace may not be set when a resource name is provided
and prevents the retry by PollImmediate() to never succeed. Storing the
namespace in a local variable prevents this from happening.
Reported-by: Rakshith R <rar@redhat.com>
Signed-off-by: Niels de Vos <ndevos@redhat.com>
There are regular CI failures where etcdserver times out. These errors
seem not to get caught by any of the existing error comparing. Matching
the error by string should prevent temporary etcdserver issues now too.
Updates: #2218Closes: #1969
Signed-off-by: Niels de Vos <ndevos@redhat.com>
This commit resolves godot linter issue
which says "Comment should end in a period (godot)".
Updates: #1586
Signed-off-by: Yati Padia <ypadia@redhat.com>
This adds a new `kmsConfig` interface that can be used to validate
different KMS services and setting. It makes checking for the available
support easier, and fetching the passphrase simpler.
The basicKMS mirrors the current validation of the KMS implementations
that use secrets and metadata. vaultKMS can be used to validate the
passphrase stored in a Vault service.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
This commit adds e2e for user secret based metadata encryption,
adds user-secret.yaml and makes required changes in kms-connection-details,
kms-config yamls.
Signed-off-by: Rakshith R <rar@redhat.com>
Added &framework.TimeoutContext{ClaimBound: timeout, PVBound: timeout}
to parameters of function call in updated package.
Signed-off-by: Rakshith R <rar@redhat.com>
this commit is to validate if the encrypted
keys are created and deleted properly while
pvc-pvc clone images
Updates: #2022
Signed-off-by: Yati Padia <ypadia@redhat.com>
We are unwantedly passing around waitgroups which is not required.
This address the same inside e2e/cephfs.go and remove waitgroup arg
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
We are unwantedly passing around waitgroups which is not required.
This address the same inside e2e/utils.go and remove waitgroup arg
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
We are unwantedly passing around waitgroups which is not required.
This address the same inside e2e/rbd_helper.go and remove the waitgroup
arg
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
We have many declarations and invocations..etc with long lines which are
very difficult to follow while doing code reading. This address the issues
in 'e2e/upgrade_*.go' files to restrict the line length to 120 chars.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
We have many declarations and invocations..etc with long lines which are
very difficult to follow while doing code reading. This address the issues
in 'e2e/staticpvc.go' and 'e2e/snapshot.go' files to restrict the line length
to 120 chars.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
We have many declarations and invocations..etc with long lines which are
very difficult to follow while doing code reading. This address the issues
in 'e2e/utils.go' files to restrict the line length to 120 chars.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
We have many declarations and invocations..etc with long lines which are
very difficult to follow while doing code reading. This address the issues
in 'e2e/resize.go' files to restrict the line length to 120 chars.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
We have many declarations and invocations..etc with long lines which are
very difficult to follow while doing code reading. This address the issues
in 'e2e/pvc.go' file to restrict the line length to 120 chars.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
We have many declarations and invocations..etc with long lines which are
very difficult to follow while doing code reading. This address the issues
in 'e2e/pod.go' files to restrict the line length to 120 chars.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
We have many declarations and invocations..etc with long lines which are
very difficult to follow while doing code reading. This address the issues
in 'e2e/deploy_vault.go' file to restrict the line length to 120 chars.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
We have many declarations and invocations..etc with long lines which are
very difficult to follow while doing code reading. This address the issues
in 'e2e/rbd_helper.go' files to restrict the line length to 120 chars.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
We have many declarations and invocations..etc with long lines which are
very difficult to follow while doing code reading. This address the issues
in 'e2e/rbd*.go' files to restrict the line length to 120 chars.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
We have many declarations and invocations..etc with long lines which are
very difficult to follow while doing code reading. This address the issues
in 'e2e/cephfs*.go' files to restrict the line length to 120 chars.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
The Go linter paralleltest checks that the t.Parallel
gets called for the test method and for the range of
test cases within the test.
Updates: #2025
Signed-off-by: Yati Padia <ypadia@redhat.com>
The import name of snapshot api package has also been changed
from `vs` to `snapapi` for consistency.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
snapshot.go currently make use of snapshot v1beta1 clientset and api,
with this commit it has been rolled into v1 clientset and api.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
add an e2eArg `helmTest` to specify if tests are running
on ceph-csi deployment via helm.
For testing in CI, Storageclass and secret deployment
is enabled on helm installation.
Signed-off-by: Yug <yuggupta27@gmail.com>
This function was wrongly declared with name initResouces() in e2e
utils package and this patch address the typo in the name
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
The e2e bootstrap does not make use of these or its declared
unwantedly in the same, removing it with this commit.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
Wrapcheck is a simple Go linter to check that errors
from external packages are wrapped during return to
help identify the error source during debugging.
This commit addresses the wrapcheck error
Updates:#2025
Signed-off-by: Yati Padia <ypadia@redhat.com>
Add a case to create a new PVC with VolumeContentSource set to a
thick-provisioned PVC. This should result in a new thick-provisioned PVC
once the cloning is done.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
when all the PVC and associated images are deleted,
the images should also get deleted from the trash.
This commit adds the validation check for the same.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
The variable naming for rbd mount options has been changed
to rbdMountOptions to be consistent with other variable naming schema
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
logErr function logs all the ocured errors
with a message that is passed for occurence
of each error.
Co-authored-by: Niels de Vos <ndevos@redhat.com>
Co-authored-by: Madhu Rajanna <madhupr007@gmail.com>
Signed-off-by: Yug <yuggupta27@gmail.com>
added a helper function to test clone creation
in a different pool.
Co-authored-by: Madhu Rajanna <madhupr007@gmail.com>
Signed-off-by: Yug <yuggupta27@gmail.com>
made pool as a argument of listRBDImages to support
listing of rbd images in different pools.
Co-authored-by: Madhu Rajanna <madhupr007@gmail.com>
Signed-off-by: Yug <yuggupta27@gmail.com>
In the function validatePVCSnapshot(...), we don't need
validateEncryption variable as we are passing kms value
which can help us check the value of validateEncryption.
Hence, we can avoid using that.
Signed-off-by: Yati Padia <ypadia@redhat.com>
This commit calls `waitForDaemonSets` and `waitForDeploymentComplete`
after upgrading to wait for csi driver pods to be in running state
for both rbd and cephfs upgrade tests.
Signed-off-by: Rakshith R <rar@redhat.com>
Bringup the rbd-nbd map/attach process on the rbd node plugin and expect the
IO to continue uninterrupted.
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
This is a negative testcase to showcase as per current design
the IO will fail because of the missing mappings
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
This commit addresses ifshort linter issues which
checks if short syntax for if-statements is possible.
updates: #1586
Signed-off-by: Rakshith R <rar@redhat.com>
Test if metrics are available at all. The actual values are a little
difficult to validate.
BlockMode volumes support metrics since Kubernetes 1.22.
See-also: kubernetes/kubernetes#97972
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Added an E2E test to test below case
* Create PVC
* Create Snapshot from PVC
* Delete PVC
* Create Clone from Snapshot
* Delete Snapshot
* Mount clone to Application
* Delete Application and PVC Clone
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
when a Snapshot is encrypted during a CreateSnapshot
operation, the encryption key gets created in the KMS
when we delete the Snapshot the key from the KMS
should also gets deleted.
When we create a volume from snapshot we are copying
required information but we missed to copy the
encryption information, This commit adds the missing
information to delete the encryption key.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
The default number for cloning and snapshot/restore is 10 volumes. This
adds to the time the test suite runs. There is no need to validate 10
copies of the encrypted volume, a single copy is sufficient.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
This moves validatePVCSnapshot() into its own function, so that it
follows the same format as validatePVCClone() does already.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
csidriver object can be created on the kubernetes
for below reason.
If a CSI driver creates a CSIDriver object,
Kubernetes users can easily discover the CSI
Drivers installed on their cluster
(simply by issuing kubectl get CSIDriver)
Ref: https://kubernetes-csi.github.io/docs/csi-driver-object.html#what-is-the-csidriver-object
attachRequired is always required to be set to
true to avoid issue on RWO PVC.
more details about it at https://github.com/rook/rook/pull/4332
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
