re-arrange the struct members to
fix below lint issue
```
struct of size 336 bytes could be of size 328 bytes
```
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Issue:
The RoundOffCephFSVolSize() function omits the fractional
part when calculating the size for cephfs volumes, leading
to the created volume capacity to be lesser than the requested
volume capacity.
Fix:
Consider the fractional part during the size calculation so the
rounded off volume size will be greater than or equal to the
requested volume size.
Signed-off-by: karthik-us <ksubrahm@redhat.com>
Fixes: #4179
This commit makes use of crush location labels from node
labels to supply `crush_location` and `read_from_replica=localize`
options during rbd map cmd. Using these options, ceph
will be able to redirect reads to the closest OSD,
improving performance.
Signed-off-by: Rakshith R <rar@redhat.com>
Recently the k8s.io/mount-utils package added more runtime dectection.
When creating a new Mounter, the detect is run every time. This is
unfortunate, as it logs a message like the following:
```
mount_linux.go:283] Detected umount with safe 'not mounted' behavior
```
This message might be useful, so it probably good to keep it.
In Ceph-CSI there are various locations where Mounter instances are
created. Moving that to the DefaultNodeServer type reduces it to a
single place. Some utility functions need to accept the additional
parameter too, so that has been modified as well.
See-also: kubernetes/kubernetes#109676
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Due to the bug in the df stat we need to round off
the subvolume size to align with 4Mib.
Note:- Minimum supported size in cephcsi is 1Mib,
we dont need to take care of Kib.
fixes#3240
More details at https://github.com/ceph/ceph/pull/46905
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
There are regular reports that identify a non-error as the cause of
failures. The Kubernetes mount-utils package has detection for systemd
based environments, and if systemd is unavailable, the following error
is logged:
Cannot run systemd-run, assuming non-systemd OS
systemd-run output: System has not been booted with systemd as init
system (PID 1). Can't operate.
Failed to create bus connection: Host is down, failed with: exit status 1
Because of the `failed` and `exit status 1` error message, users might
assume that the mounting failed. This does not need to be the case. The
container-images that the Ceph-CSI projects provides, do not use
systemd, so the error will get logged with each mount attempt.
By using the newer MountSensitiveWithoutSystemd() function from the
mount-utils package where we can, the number of confusing logs get
reduced.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
As we added support to set the metadata on the rbd images created for
the PVC and volume snapshot, by default metadata is set on all the images.
As we have seen we are hitting issues#2327 a lot of times with this,
we start to leave a lot of stale images. Currently, we rely on
`--extra-create-metadata=true` to decide to set the metadata or not,
we cannot set this option to false to disable setting metadata because we
use this for encryption too.
This changes is to provide an option to disable setting the image
metadata when starting cephcsi.
Fixes: #3009
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
This change helps read the cluster name from the cmdline args,
the provisioner will set the same on the RBD images.
Fixes: #2973
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Mounts managed by ceph-fuse may get corrupted by e.g. the ceph-fuse process
exiting abruptly, or its parent container being terminated, taking down its
child processes with it.
This commit adds checks to NodeStageVolume and NodePublishVolume procedures
to detect whether a mountpoint in staging_target_path and/or target_path is
corrupted, and remount is performed if corruption is detected.
Signed-off-by: Robert Vasek <robert.vasek@cern.ch>
k8s.io/utils/mount has moved to k8s.io/mount-utils, and Ceph-CSI uses
that already in most locations. Only internal/util/util.go still imports
the old path.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
This log line is seen frequently in the logs and its better to be at
Warning loglevel rather than Error based on its severity
E1109 08:30:45.612395 38328 util.go:247] kernel 4.19.202 does not support required features
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
A new "internal/kms" package is introduced, it holds the API that can be
consumed by the RBD components.
The KMS providers are currently in the same package as the API. With
later follow-up changes the providers will be placed in their own
sub-package.
Because of the name of the package "kms", the types, functions and
structs inside the package should not be prefixed with KMS anymore:
internal/kms/kms.go:213:6: type name will be used as kms.KMSInitializerArgs by other packages, and that stutters; consider calling this InitializerArgs (golint)
Updates: #852
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Moving the log functions into its own internal/util/log package makes it
possible to split out the humongous internal/util packages in further
smaller pieces. This reduces the inter-dependencies between utility
functions and components, preventing circular dependencies which are not
allowed in Go.
Updates: #852
Signed-off-by: Niels de Vos <ndevos@redhat.com>
nlreturn linter requires a new line before return
and branch statements except when the return is alone
inside a statement group (such as an if statement) to
increase code clarity. This commit addresses such issues.
Updates: #1586
Signed-off-by: Rakshith R <rar@redhat.com>
Problem:
-------
For rbd nbd userspace mounter backends, after a restart of the nodeplugin
all the mounts will start seeing IO errors. This is because, for rbd-nbd
backends there will be a userspace mount daemon running per volume, post
restart of the nodeplugin pod, there is no way to restore the daemons
back to life.
Solution:
--------
The volume healer is a one-time activity that is triggered at the startup
time of the rbd nodeplugin. It navigates through the list of volume
attachments on the node and acts accordingly.
For now, it is limited to nbd type storage only, but it is flexible and
can be extended in the future for other backend types as needed.
From a few feets above:
This solves a severe problem for nbd backed csi volumes. The healer while
going through the list of volume attachments on the node, if finds the
volume is in attached state and is of type nbd, then it will attempt to
fix the rbd-nbd volumes by sending a NodeStageVolume request with the
required volume attributes like secrets, device name, image attributes,
and etc.. which will finally help start the required rbd-nbd daemons in
the nodeplugin csi-rbdplugin container. This will allow reattaching the
backend images with the right nbd device, thus allowing the applications
to perform IO without any interruptions even after a nodeplugin restart.
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
This commit resolves godot linter issue
which says "Comment should end in a period (godot)".
Updates: #1586
Signed-off-by: Yati Padia <ypadia@redhat.com>
* Make kernel version parsing to support more (valid) version strings
* Put version string parsing into a separate, testable function
* Fixes#2248 (Kernel Subversion Parsing Failure)
Signed-off-by: Jonas Zeiger <jonas.zeiger@talpidae.net>
We have many declarations and invocations..etc with long lines which are
very difficult to follow while doing code reading. This address the issues
in 'internal/util' package files to restrict the line length to 120 chars.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
as callers are already taking care of returing
the GRPC error code return the actual error
from the IsMountPoint function.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
This commit addresses ifshort linter issues which
checks if short syntax for if-statements is possible.
updates: #1586
Signed-off-by: Rakshith R <rar@redhat.com>
It helps to get a stack trace when debugging issues. Certain things are
considered bugs in the code (like missing attributes in a struct), and
might cause a panic in certain occasions.
In this case, a missing string will not panic, but the behaviour will
also not be correct (DEKs getting encrypted, but unable to decrypt).
Clearly logging this as a BUG is probably better than calling panic().
Signed-off-by: Niels de Vos <ndevos@redhat.com>
When the KMS configuration can not be found, it is useful to know what
configurations are available. This aids troubleshooting when typos in
the KMS ID are made.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
An rbd image can have a maximum number of
snapshots defined by maxsnapshotsonimage
On the limit is reached the cephcsi will
start flattening the older snapshots and
returns the ABORT error message, The Request
comes after this as to wait till all the
images are flattened (this will increase the
PVC creation time. Instead of waiting till
the maximum snapshots on an RBD image, we can
have a soft limit, once the limit reached
cephcsi will start flattening the task to
break the chain. With this PVC creation time
will only be affected when the hard limit
(minsnapshotsonimage) reached.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
as we have 2 functions for logging. one for logging
with message and another one is for logging with
context. renamed ErrorLog to ErrorLogMsg to log
with messages.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Direct usage of numbers should be avoided.
Issue reported:
mnd: Magic number: X, in <argument> detected (gomnd)
Signed-off-by: Yug <yuggupta27@gmail.com>
as v1.0.0 is deprecated we need to remove the support
for it in the Next coming (v3.0.0) release. This PR
removes the support for the same.
closes#882
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Added maxsnapshotsonimage flag to flatten
the older rbd images on the chain to avoid
issue in krbd.The limit is in krbd since it
only allocate 1 4KiB page to handle all the
snapshot ids for an image.
The max limit is 510 as per
https://github.com/torvalds/linux/blob/
aaa2faab4ed8e5fe0111e04d6e168c028fe2987f/drivers/block/rbd.c#L98
in cephcsi we arekeeping the default to 450 to reserve 10%
to avoid issues.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
"github.com/pkg/errors" does not offer more functionlity than that we
need from the standard "errors" package. With Golang v1.13 errors can be
wrapped with `fmt.Errorf("... %w", err)`. `errors.Is()` and
`errors.As()` are available as well.
See-also: https://tip.golang.org/doc/go1.13#error_wrapping
Signed-off-by: Niels de Vos <ndevos@redhat.com>
added skipForceFlatten flag to skip
the image deptha and skip image flattening.
This will be very useful if the kernel is
not listed in cephcsi which supports deep
flatten fauture.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
added Hardlimit and Softlimit flags for cephcsi
arguments. When the Softlimit is reached cephcsi
will start a background task to flatten the rbd
image and return success and if the hardlimit
is reached it will start a background task
to flatten the rbd image and return ready
to use as false to make sure that the image
will not be used until it is flatten.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
as we need to reuse the same code for both cephfs
and rbd moving the supported version check function
to util package, for better readability renamed
the function.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
It seems that convering the release component from the unix.Utsrelease
type leaves some trailing "\x00" characters.
While splitting the string to compare kernel versions, these additional
characters might prevent converting the string to an int. Strip the
additional characters before returning the string.
Note:
"\x00" characters are not visible when printing to a file or screen.
They can be seen in hex-editors, or sending the output through 'xxd'.
Fixes: #1167
Signed-off-by: Niels de Vos <ndevos@redhat.com>
