RBD Snapshot doc was the part of the README.md file. Hence,
renamed the cephfs-snap-clone.md file to snap-clone.md file
and moved the rbd snapshot document there.
Signed-off-by: yati1998 <ypadia@redhat.com>
We do not have `text` in the new section of the MarkDown Rules. Hence
dropping them.
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Update the coding guide about MD014, i.e.
Dollar signs used before commands without showing output
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
MD014 - Dollar signs used before commands without showing output
The dollar signs are unnecessary, it is easier to copy and paste and
less noisy if the dollar signs are omitted. Especially when the
command doesn't list the output, but if the command follows output
we can use `$ ` (dollar+space) mainly to differentiate between
command and its ouput.
scenario 1: when command doesn't follow output
```console
cd ~/work
```
scenario 2: when command follow output (use dollar+space)
```console
$ ls ~/work
file1 file2 dir1 dir2 ...
```
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Added a document which contains the steps
and RBD CLI commands we execute when we create
a kubernetes snapshot, delete kubernetes snapshot,
Restore a snapshot to a new PVC,Kubernetes volume
cloning and kubernetes PVC deletion.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
as v1.0.0 is deprecated we need to remove the support
for it in the Next coming (v3.0.0) release. This PR
removes the support for the same.
closes#882
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Added maxsnapshotsonimage flag to flatten
the older rbd images on the chain to avoid
issue in krbd.The limit is in krbd since it
only allocate 1 4KiB page to handle all the
snapshot ids for an image.
The max limit is 510 as per
https://github.com/torvalds/linux/blob/
aaa2faab4ed8e5fe0111e04d6e168c028fe2987f/drivers/block/rbd.c#L98
in cephcsi we arekeeping the default to 450 to reserve 10%
to avoid issues.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
updated upgrade documentation to remove
the snapshot created by alpha driver before
upgrade of CSI driver as beta snapshot is not
backward compatible with the alpha snapshot.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
added skipForceFlatten flag to skip
the image deptha and skip image flattening.
This will be very useful if the kernel is
not listed in cephcsi which supports deep
flatten fauture.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
added Hardlimit and Softlimit flags for cephcsi
arguments. When the Softlimit is reached cephcsi
will start a background task to flatten the rbd
image and return success and if the hardlimit
is reached it will start a background task
to flatten the rbd image and return ready
to use as false to make sure that the image
will not be used until it is flatten.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Updated storageclass and snapshotclass
to include the name prefix for naming
subvolumes and snapshots.
Fixes: #1087
Signed-off-by: Yug Gupta <ygupta@redhat.com>
If the PR is having trivial changes or the reviewer is
confident enough that PR doesn't need a second review,
the reviewer can set `ready-to-merge` label on the PR.
The bot will merge the PR if it's having one approval and the
label `ready-to-merge`
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
With the change in #382, support for static PV for CephFS was added.
This change is to update the already existing doc for the same.
Issue: #669
Signed-off-by: Mudit Agarwal <muagarwa@redhat.com>
Added step to identify alpha snapshot CRD.
Added step to delete alpha CRD and link
for installing beta CRD.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
The commitlint CI job uses the configuration from .commitlintrc.yaml
which contains the different components that Ceph-CSI uses. A short
description of each component has been added, so that contributors
understand what component to mention in the prefix of the subject in
commit messages.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Added document on the standard user need to follow
when writting the commit message and to include
sign-off in commit message.
source: https://probot.github.io/apps/dco/
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Updated golang version to 1.13.x and
also updated user to set GO111MODULE=on
and CGO_ENABLED=1 when doing development
in cephcsi
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
The internal/ directory in Go has a special meaning, and indicates that
those packages are not meant for external consumption. Ceph-CSI does
provide public APIs for other projects to consume. There is no plan to
keep the API of the internally used packages stable.
Closes: #903
Signed-off-by: Niels de Vos <ndevos@redhat.com>
In (standard, non-privileged) container environments the /sys/fs/cgroup
mountpoint is not available. This would cause the tests to fail, as
TestGetPIDLimit() tries to write to the cgroup configuration.
The test will work when run as root on a privileged container or
directly on a host (as Travis CI does).
Setting the CEPH_CSI_RUN_ALL_TESTS environment variable to a non-empty
value will cause the test to be executed.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
As kubernetes CSI sidecar is exposing the
GRPC mertics we can make use of the same in
ceph-csi we dont need to expose our own.
update: #881
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
This makes it possible to build on any platform that supports Linux
containers. The container image used for building is created once, or on
updating the `scripts/Dockerfile.build` and is cached afterwards.
To build the executable in a container, use `make containerized-build`
and everything will be done automatically. The executable will also be
available on the usual location.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
This PR updates the upgrade doc to handle the
node drain issue what we have seen in
https://github.com/ceph/ceph-csi/issues/756
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
this allows administrators to override the naming prefix for both volumes and snapshots
created by the rbd plugin.
Signed-off-by: Reinier Schoof <reinier@skoef.nl>
PR #282 introduces the mount cache to
solve cephfs fuse mount issue when cephfs plugin pod
restarts .This is not working as intended. This PR removes
the code for maintainability.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
* moves KMS type from StorageClass into KMS configuration itself
* updates omapval used to identify KMS to only it's ID without the type
why?
1. when using multiple KMS configurations (not currently supported)
automated parsing of kms configuration will be failing because some
entries in configs won't comply with the requested type
2. less options are needed in the StorageClass and less data used to
identify the KMS
Signed-off-by: Vasyl Purchel vasyl.purchel@workday.com
Signed-off-by: Andrea Baglioni andrea.baglioni@workday.com
- adds proposal document for PVC encryption from PR448
- adds per-volume encription by generating encryption passphrase
for each volume and storing it in a KMS
- adds HashiCorp Vault integration as a KMS for encryption passphrases
- avoids encrypting volume second time if it was already encrypted but
no file system created
- avoids unnecessary checks if volume is a mapped device when encryption
was not requested
- prevents resizing encrypted volumes (it is not currently supported)
- prevents creating snapshots from encrypted volumes to prevent attack
on encryption key (security guard until re-encryption of volumes
implemented)
Signed-off-by: Vasyl Purchel vasyl.purchel@workday.com
Signed-off-by: Andrea Baglioni andrea.baglioni@workday.comFixes#420Fixes#744
Adds encryption in StorageClass as a parameter. Encryption passphrase is
stored in kubernetes secrets per StorageClass. Implements rbd volume
encryption relying on dm-crypt and cryptsetup using LUKS extension
The change is related to proposal made earlier. This is a first part of
the full feature that adds encryption with passphrase stored in secrets.
Signed-off-by: Vasyl Purchel vasyl.purchel@workday.com
Signed-off-by: Andrea Baglioni andrea.baglioni@workday.com
Signed-off-by: Ioannis Papaioannou ioannis.papaioannou@workday.com
Signed-off-by: Paul Mc Auley paul.mcauley@workday.com
Signed-off-by: Sergio de Carvalho sergio.carvalho@workday.com
The storage class already takes MountOptions(MountFlags), these are the
bind mount options. Some of these options may not be recognised by the
cephfs mount. Hence added a new parameterin Storage Class for
- cephfs kernel mount options,
- ceph-fuse mount options
Ceph kernel mount options are different from ceph-fuse options, hence
added two different parameters.
Signed-off-by: Poornima G <pgurusid@redhat.com>
The container runtime CRI-O limits the number of PIDs to 1024 by
default. When many PVCs are requested at the same time, it is possible
for the provisioner to start too many threads (or go routines) and
executing 'rbd' commands can start to fail. In case a go routine can not
get started, the process panics.
The PID limit can be changed by passing an argument to kubelet, but this
will affect all pids running on a host. Changing the parameters to
kubelet is also not a very elegant solution.
Instead, the provisioner pod can change the configuration itself. The
pod is running in privileged mode and can write to /sys/fs/cgroup where
the limit is configured.
With this change, the limit is configured to 'max', just as if there is
no limit at all. The logs of the csi-rbdplugin in the provisioner pod
will reflect the change it makes when starting the service:
$ oc -n rook-ceph logs -c csi-rbdplugin csi-rbdplugin-provisioner-0
..
I0726 13:59:19.737678 1 cephcsi.go:127] Initial PID limit is set to 1024
I0726 13:59:19.737746 1 cephcsi.go:136] Reconfigured PID limit to -1 (max)
..
It is possible to pass a different limit on the commandline of the
cephcsi executable. The following flag has been added:
--pidlimit=<int> the PID limit to configure through cgroups
This accepts special values -1 (max) and 0 (default, do not
reconfigure). Other integers will be the limit that gets configured in
cgroups.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
This change also starts mapping nbd based access using ther rbd CLI
as, it is a prerequisite to get device listing for nbd as well.
Signed-off-by: ShyamsundarR <srangana@redhat.com>
Use Deployment with leader election instead of StatefulSet
Deployment behaves better when a node gets disconnected
from the rest of the cluster - new provisioner leader
is elected in ~15 seconds, while it may take up to
5 minutes for StatefulSet to start a new replica.
Refer: kubernetes-csi/external-provisioner@52d1fbc
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
This commit adds support to mount and delete volumes provisioned by older
plugin versions (1.0.0) in order to support backward compatibility to 1.0.0
created volumes.
It adds back the ability to specify where older meta data was specified, using
the metadatastorage option to the plugin. Further, using the provided meta data
to mount and delete the older volumes.
It also supports a variety of ways in which monitor information may have been
specified (in the storage class, or in the secret), to keep the monitor
information current.
Testing done:
- Mount/Delete 1.0.0 plugin created volume with monitors in the StorageClass
- Mount/Delete 1.0.0 plugin created volume with monitors in the secret with
a key "monitors"
- Mount/Delete 1.0.0 plugin created volume with monitors in the secret with
a user specified key
- PVC creation and deletion with the current version (to ensure at the minimum
no broken functionality)
- Tested some negative cases, where monitor information is missing in secrets
or present with a different key name, to understand if failure scenarios work
as expected
Updates #378
Follow-up work:
- Documentation on how to upgrade to 1.1 plugin and retain above functionality
for older volumes
Signed-off-by: ShyamsundarR <srangana@redhat.com>
RBD plugin needs only a single ID to manage images and operations against a
pool, mentioned in the storage class. The current scheme of 2 IDs is hence not
needed and removed in this commit.
Further, unlike CephFS plugin, the RBD plugin splits the user id and the key
into the storage class and the secret respectively. Also the parameter name
for the key in the secret is noted in the storageclass making it a variant and
hampers usability/comprehension. This is also fixed by moving the id and the key
to the secret and not retaining the same in the storage class, like CephFS.
Fixes#270
Testing done:
- Basic PVC creation and mounting
Signed-off-by: ShyamsundarR <srangana@redhat.com>
This is a part of the stateless set of commits for CephCSI.
This commit removes the dependency on config maps to store cephFS provisioned
volumes, and instead relies on RADOS based objects and keys, and required
CSI VolumeID encoding to detect the provisioned volumes.
Changes:
- Provide backward compatibility to provisioned volumes by older plugin versions (1.0.0 or older)
- Remove Create/Delete support for statically provisioned volumes (fixes#382)
- Added namespace support to RADOS OMaps and used the same to store RADOS CSI objects and keys in the CephFS metadata pool
- Added support to mention fsname for CephFS provisioning (fixes#359)
- Changed field name in CSI Identifier to 'location', to denote a pool or fscid
- Updated mounter cache to use new scheme
- Required Helm manifests are updated
- Required documentation and other manifests are updated
- Made driver option 'metadatastorage' as optional, as fresh installs do not need to specify the same
Testing done:
- Create/Mount/Delete PVC
- Create/Delete 5 PVCs
- Mount version 1.0.0 PVC
- Delete version 1.0.0 PV
- Mount Statically defined PV/PVC/Pod
- Mount Statically defined version 1.0.0 PV/PVC/Pod
- Delete Statically defined version 1.0.0 PV/PVC/Pod
- Node restart when mounted to test mountcache
- Use InstanceID other than 'default'
- RBD basic round of tests, as namespace is added to OMaps
- csitest against ceph-fs plugin
- NOTE: CephFS plugin still does not detect and address already created
volumes but of a different size
- Test not providing any value to the metadata storage parameter
Signed-off-by: ShyamsundarR <srangana@redhat.com>
currently, we have 3 docker files(cephcsi,rbd,cephfs) in the ceph-csi repo.
[commit ](85e121ebfe)
added by John to build a single image which can act as rbd or
cephfs based on the input configuration.
This PR updates the makefile and kubernetes templates to use
the unified image and also its deletes the other two dockerfiles.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Existing config maps are now replaced with rados omaps that help
store information regarding the requested volume names and the rbd
image names backing the same.
Further to detect cluster, pool and which image a volume ID refers
to, changes to volume ID encoding has been done as per provided
design specification in the stateless ceph-csi proposal.
Additional changes and updates,
- Updated documentation
- Updated manifests
- Updated Helm chart
- Addressed a few csi-test failures
Signed-off-by: ShyamsundarR <srangana@redhat.com>
Based on the review comments addressed the following,
- Moved away from having to update the pod with volumes
when a new Ceph cluster is added for provisioning via the
CSI driver
- The above now used k8s APIs to fetch secrets
- TBD: Need to add a watch mechanisim such that these
secrets can be cached and updated when changed
- Folded the Cephc configuration and ID/key config map
and secrets into a single secret
- Provided the ability to read the same config via mapped
or created files within the pod
Tests:
- Ran PV creation/deletion/attach/use using new scheme
StorageClass
- Ran PV creation/deletion/attach/use using older scheme
to ensure nothing is broken
- Did not execute snapshot related tests
Signed-off-by: ShyamsundarR <srangana@redhat.com>
This commit provides the option to pass in Ceph cluster-id instead
of a MON list from the storage class.
This helps in moving towards a stateless CSI implementation.
Tested the following,
- PV provisioning and staging using cluster-id in storage class
- PV provisioning and staging using MON list in storage class
Did not test,
- snapshot operations in either forms of the storage class
Signed-off-by: ShyamsundarR <srangana@redhat.com>
This change adds the ability to define a `multiNodeWritable` option in
the Storage Class.
This change does a number of things:
1. Allow multi-node-multi-writer access modes if the SC options is
enabled
2. Bypass the watcher checks for MultiNodeMultiWriter Volumes
3. Maintains existing watcher checks for SingleNodeWriter access modes
regardless of the StorageClass option.
fix lint-errors
