This commit fixes a bug in kmip kms Decrypt
function, where emd.DEK was fed in a Nonce
instead of emd.Nonce by mistake.
Signed-off-by: Rakshith R <rar@redhat.com>
as PSP is deprecated in kubernetes 1.21
and will be removed in kubernetes 1.25
removing the existing PSP related templates
from the repo and updated the required documents.
fixes#1988
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
The github.com/google/uuid package is used by Kubernetes, and it is part
of the vendor/ directory already. Our usage of github.com/pborman/uuid
can be replaced by github.com/google/uuid, so that
github.com/pborman/uuid can be removed as a dependency.
Closes: #3315
Signed-off-by: Niels de Vos <ndevos@redhat.com>
considering we have 3.7 release in place, this commit remove
the release 3.5 backporting based on the labels in the repo.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
This commit rebase the kubernetes version to 1.24.4 tree to make
sure we are using latest available bug fix release.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
This commit add upgrade documentation for release 3.7.0
and also update support matrix for v3.7.0.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
This commit add ceph_pre_quincy tag to the build. The main
reason being the changes or new APIs exposed in go-ceph version
v0.17.0 is part of this Ceph build tag. Enabling the same for
the reason.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
csi-addons server will advertise replication capability and
replication service will run with csi-addons server too.
Signed-off-by: Rakshith R <rar@redhat.com>
The Key Management Interoperability Protocol (KMIP)
is an extensible communication protocol
that defines message formats for the manipulation
of cryptographic keys on a key management server.
Ceph-CSI can now be configured to connect to
various KMS using KMIP for encrypting RBD volumes.
https://en.wikipedia.org/wiki/Key_Management_Interoperability_Protocol
Signed-off-by: Rakshith R <rar@redhat.com>
Currently, we use the Ubuntu 18.04 actions runner
for stale job. This runner will be deprecated
and removed in the beginning of Dec.
So should change the runner to use latest ubuntu.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
getting is unused for linter "staticcheck"
(nolintlint) error message due to wrong
comment format. this the format now with
`//directive // comment`
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
All the CSI spec imports are having snakecase
we cannot fix it, instead of disabling all imports
skipping the nosnakecase static check.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
This commits updates below items
* Golang version to v1.18.5
* Golangci-lint to v1.47.3
* Helm version to v3.9.2
* Rook version to v1.9.8
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
NFS volume similar to CephFs volumes can support
fsGroupPolicy as File, now Kubernetes Kubernetes may
use fsGroup to change permissions and ownership of the
volume to match user requested fsGroup in the pod's
SecurityPolicy regardless of fstype or access mode.
Signed-off-by: Rakshith R <rar@redhat.com>
This commit cleans up for loop to use index to access
value instead of copying value into a new variable
while iterating.
```
internal/util/csiconfig.go:103:2: rangeValCopy: each \
iteration copies 136 bytes (consider pointers or indexing) \
(gocritic)
for _, cluster := range config {
```
Signed-off-by: Rakshith R <rar@redhat.com>
This commit makes modification to nfs daemonset to use
nfs nodeserver. `nfs.NetNamespaceFilePath` example is
added.
Signed-off-by: Rakshith R <rar@redhat.com>
This commit adds nfs nodeserver capable of
mounting nfs volumes, even with pod networking
using NSenter design similar to rbd and cephfs.
NodePublish, NodeUnpublish, NodeGetVolumeStats
and NodeGetCapabilities have been implemented.
The nodeserver implementation has been inspired
from https://github.com/kubernetes-csi/csi-driver-nfs,
which was previously used for mounted cephcsi exported
nfs volumes. The current implementation is also
backward compatible for the previously created
PVCs.
Signed-off-by: Rakshith R <rar@redhat.com>
Current code uses an !A && !B condition incorrectly to
test A:Up and B:status for a remote peer image.
This should be !A || !B as we require both conditions to
be in the specified state (Up: true, and status Unknown).
This is corrected by this commit, and further fixes:
- check and return ready only when a remote site is
found in the status output
- check if all peer sites are ready, if multiple are found
and return ready appropriately
Signed-off-by: Shyamsundar Ranganathan <srangana@redhat.com>
During ResyncVolume we check if the image
is in an error state, and we resync.
After resync, the image will move to
either the `Error` or the `Resyncing` state.
And if the image is in the above two
conditions, we will return a successful
response and Ready=false so that the
consumer can wait until the volume is
ready to use. If the image is in any
other state we return an error message
to indicate the syncing is not going on.
The whole resync and image state change
depends on the rbd mirror daemon. If the
mirror daemon is not running, the image
can be in Resyncing or Unknown state.
The Ramen marks the volume replication as
secondary, and once the resync starts, it
will delete the volume replication CR as a
cleanup process.
As we dont have a check for the rbd mirror
daemon, we are returning a resync success
response and Ready=false. Due to this false
response Ramen is assuming the resync started
and deleted the volume replication CR, and
because of this, the cluster goes into a bad
state and needs manual intervention.
fixes#3289
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Comment out `comment: ` settings, since it
does not have any options set, otherwise
throws the following error.
```
The current Mergify configuration is invalid
required key not provided @ defaults → actions → comment → message
```
Signed-off-by: Rakshith R <rar@redhat.com>
At present, the check is performed to validate the version of kube
is v1.17 and this commit remove the same.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
IsNotMountPoint() is deprecated and Mounter.IsMountPoint() is
recommended to be used instead.
Reported-by: golangci/staticcheck
Signed-off-by: Niels de Vos <ndevos@redhat.com>
NewWithoutSystemd() has been introduced in the k8s.io/mount-utils
package so that systemd is not called while executing functions. This
offers consumers the ability to prevent confusing and scary messages
from getting logged.
See-also: kubernetes/kubernetes#111218
Signed-off-by: Niels de Vos <ndevos@redhat.com>
kubernetes/kubernetes#111083 has been merged and synced into
k8s.io/mount-utils. This should remove any systemd log messages while
calling NodeStageVolume and NodeGetVolumeStats.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Some of the steps still refer to CephFS, likely missed some replacements
while copy/pasting. The logging is a little confusing when messages
claim something with CephFS failed, but the test is about NFS.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
previously, it was a requirement to have attacher sidecar for CSI
drivers and there had an implementation of dummy mode of operation.
However skipAttach implementation has been stabilized and the dummy
mode of operation is going to be removed from the external-attacher.
Considering this driver work on volumeattachment objects for NBD driver
use cases, we have to implement dummy controllerpublish and unpublish
and thus keep supporting our operations even in absence of dummy mode
of operation in the sidecar.
This commit make a NOOP controller publish and unpublish for RBD driver.
CephFS driver does not require attacher and it has already been made free
from the attachment operations.
Ref# https://github.com/ceph/ceph-csi/pull/3149
Ref# https://github.com/kubernetes-csi/external-attacher/issues/226
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
`--setmetadata` is false by default, honoring it
will keep the metadata disabled by default
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
`--setmetadata` is false by default, honoring it
will keep the metadata disabled by default
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
