rbd mirroring CLI calls are async and it doesn't wait
for the operation to be completed. ex:- `rbd mirror image enable`
it will enable the mirroring on the image but it doesn't
ensure that the image is mirroring enabled and healthy
primary. The same goes for the promote volume also.
This commits adds a check-in PromoteVolume to make sure
the image in a healthy state i.e `up+stopped`.
note:- not considering any intermediate states to make
sure the image is completely healthy before responding
success to the RPC call.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Journal-based RADOS block device mirroring ensures point-in-time
consistent replicas of all changes to an image, including reads and
writes, block device resizing, snapshots, clones, and flattening.
Journaling-based mirroring records all modifications to an image in the
order in which they occur. This ensures that a crash-consistent mirror
of an image is available.
Mirroring when configured in journal mode, mirroring will
utilize the RBD journaling image feature to replicate the image
contents. If the RBD journaling image feature is not yet enabled on the
image, it will be automatically enabled.
Fixes: #2018
Co-authored-by: Madhu Rajanna <madhupr007@gmail.com>
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Depending on the way Ceph-CSI is deployed, the capabilities will be
configured for the GetCapabilities procedure. The other procedures are
more straight-forward.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
After adding the new CSI-Addons Server, golang-ci complains that
driver.Run() is too complex. By moving the profiling checks and starting
of the go-routines in their own function, golang-ci is happy again.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Add a new CSI-Addons Server and empty Identity Service for the RBD
plugin. The implementation of the Identity Service procedure calls will
be done in other PRs.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
currently we are fist operating on the dummy
image to refresh the pool and then we are adding
the scheduling. we think the scheduling should
be added first and than we should refresh the
pool. If we do this all the existing schedules
will be considered from the scheduler.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
with shallow copy of rbdVol to dummyVol
the image name update of the dummyVol is getting
reflected on the rbdVol which we dont want.
do deep copy to avoid this problem.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Uses the below schema to supply mounter specific map/unmapOptions to the
nodeplugin based on the discussion we all had at
https://github.com/ceph/ceph-csi/pull/2636
This should specifically be really helpful with the `tryOthermonters`
set to true, i.e with fallback mechanism settings turned ON.
mapOption: "kbrd:v1,v2,v3;nbd:v1,v2,v3"
- By omitting `krbd:` or `nbd:`, the option(s) apply to
rbdDefaultMounter which is krbd.
- A user can _override_ the options for a mounter by specifying `krbd:`
or `nbd:`.
mapOption: "v1,v2,v3;nbd:v1,v2,v3"
is effectively the same as the 1st example.
- Sections are split by `;`.
- If users want to specify common options for both `krbd` and `nbd`,
they should mention them twice.
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
The dummy mirror image needs to be disabled and then
reenabled for mirroring, to ensure a newly promoted
primary is now starting to schedule snapshots.
Signed-off-by: Shyamsundar Ranganathan <srangana@redhat.com>
currently we have a bug in rbd mirror scheduling module.
After doing failover and failback the scheduling is not
getting updated and the mirroring snapshots are not
getting created periodically as per the scheduling
interval. This PR workarounds this one by doing below
operations
* Create a dummy (unique) image per cluster and this image
should be easily identified.
* During Promote operation on any image enable the
mirroring on the dummy image. when we enable the mirroring
on the dummy image the pool will get updated and the
scheduling will be reconfigured.
* During Demote operation on any image disable the mirroring
on the dummy image. the disable need to be done to enable
the mirroring again when we get the promote request to make
the image as primary
* When the DR is no more needed, this image need to be
manually cleanup as for now as we dont want to add a check
in the existing DeleteVolume code path for delete dummy image
as it impact the performance of the DeleteVolume workflow.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Moved to add scheduling to the promote
operation as scheduling need to be added
when the image is promoted and this is
the correct method of adding the scheduling
to make the scheduling take place.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
instead of logging the volumeID and the pool
name. log the poolname and image name for better
debugging.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
If we hit any error while running the cryptosetup
commands we are logging only the error message.
with only error message it is difficult to analyze
the problem, logging the stdError will help us to
check what is the problem.
updates: #2610
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
On line 341 a `transaction` is created. This is passed to the deferred
`undoStagingTransaction()` function when an error in the
`NodeStageVolume` procedure is detected. So far, so good.
However, on line 356 a new `transaction` is returned. This new
`transaction` is not used for the defer call.
By removing the empty `transaction` that is used in the defer call, and
calling `undoStagingTransaction()` on an error of `stageTransaction()`,
the code is a little simpler, and the cleanup of the transaction should
be done correctly now.
Updates: #2610
Signed-off-by: Niels de Vos <ndevos@redhat.com>
This log line is seen frequently in the logs and its better to be at
Warning loglevel rather than Error based on its severity
E1109 08:30:45.612395 38328 util.go:247] kernel 4.19.202 does not support required features
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Problem:
On remap/attach of device (i.e. nodeplugin restart), there is no way
for rbd-nbd to defend if the backend storage is matching with the initial
backend storage.
Say, if an initial map request for backend "pool1/image1" got mapped to
/dev/nbd0 and the userspace process is terminated (on nodeplugin restart).
A next remap/attach (nodeplugin start) request within reattach-timeout is
allowed to use /dev/nbd0 for a different backend "pool1/image2"
For example, an operation like below could be dangerous:
$ sudo rbd-nbd map --try-netlink rbd-pool/ext4-image
/dev/nbd0
$ sudo blkid /dev/nbd0
/dev/nbd0: UUID="bfc444b4-64b1-418f-8b36-6e0d170cfc04" TYPE="ext4"
$ sudo pkill -15 rbd-nbd <-- nodeplugin terminate
$ sudo rbd-nbd attach --try-netlink --device /dev/nbd0 rbd-pool/xfs-image
/dev/nbd0
$ sudo blkid /dev/nbd0
/dev/nbd0: UUID="d29bf343-6570-4069-a9ea-2fa156ced908" TYPE="xfs"
Solution:
rbd-nbd/kernel now provides a way to keep some metadata in sysfs to identify
between the device and the backend, so that when a remap/attach request is
made, rbd-nbd can compare and avoid such dangerous operations.
With the provided solution, as part of the initial map request, backend
cookie (ceph-csi VOLID) can be stored in the sysfs per device config, so
that on a remap/attach request rbd-nbd will check and validate if the
backend per device cookie matches with the initial map backend with the help
of cookie.
At Ceph-csi we use VOLID as device cookie, which will be unique, we pass
the VOLID as cookie at map and use the same at the time of attach, that
way rbd-nbd can identify backends and their matching devices.
Requires:
https://github.com/ceph/ceph/pull/41323https://lkml.org/lkml/2021/4/29/274
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
This change allows the user to choose not to fallback to NBD mounter
when some ImageFeatures are absent with krbd driver, rather just fail
the NodeStage call.
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Currently, we recognize and warn for the provided image features based on
our prior intelligence at ceph-csi (i.e based on supportedFeatures map
and validateImageFeatures) at image/PV creation time. It might be very
much possible that the cluster is heterogeneous i.e. the PV creation and
application container might both be on different nodes with different
kernel versions (krbd driver versions).
This PR adds a mechanism to check for the supported krbd features during
mount time, if the krbd driver doesn't have the specified image feature
then it will fall back to rbd-nbd mounter.
Fixes: #478
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
When using UPPER_CASE formatting for the HashiCorp Vault KMS
configuration, a missing `VAULT_DESTROY_KEYS` will cause the option to
be set to "false". The default for the option is intended for be "true".
This is a difference in behaviour between the `vaultDestroyKeys` and
`VAULT_DESTROY_KEYS` options. Both should use a default of "true" when
the configuration does not set the option explicitly.
By setting the default options in the `standardVault` struct before
unmarshalling the configuration in it, the default values will be
retained for the missing configuration options.
Reported-by: Rachael George <rgeorge@redhat.com>
Signed-off-by: Niels de Vos <ndevos@redhat.com>
this commit make use of the migration request secret parsing and set
the required fields for further nodestage operations
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
parseAndDeleteMigratedVolume() prviously clubbed the logic of
parsing of migration volume handle and then continued with the
deletion of the volume. however this commit split this
logic into two, ie parsing has been done in parseMigrationVolID()
and DeleteMigratedVolume() deletes the backend volume.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
This commit adds a couple of helper functions to parse the migration
request secret and set it for further csi driver operations.
More details:
The intree secret has a data field called "key" which is the base64
admin secret key. The ceph CSI driver currently expect the secret to
contain data field "UserKey" for the equivalant. The CSI driver also
expect the "UserID" field which is not available in the in-tree secret
by deafult. This missing userID will be filled (if the username differ
than 'admin') in the migration secret as 'adminId' field in the
migration request, this commit adds the logic to parse this migration
secret as below:
"key" field value will be picked up from the migraion secret to "UserKey"
field.
"adminId" field value will be picked up from the migration secret to "UserID"
field
if `adminId` field is nil or not set, `UserID` field will be filled with
default value ie `admin`.The above logic get activated only when the secret
is a migration secret, otherwise skipped to the normal workflow as we have
today.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
Thick-provisioning was introduced to make accounting of assigned space
for volumes easier. When thick-provisioned volumes are the only consumer
of the Ceph cluster, this works fine. However, it is unlikely that this
is the case. Instead, accounting of the requested (thin-provisioned)
size of volumes is much more practical as different types of volumes can
be tracked.
OpenShift already provides cluster-wide quotas, which can combine
accounting of requested volumes by grouping different StorageClasses.
In addition to the difficult practise of allowing only thick-provisioned
RBD backed volumes, the performance makes thick-provisioning
troublesome. As volumes need to be completely allocated, data needs to
be written to the volume. This can take a long time, depending on the
size of the volume. Provisioning, cloning and snapshotting becomes very
much noticeable, and because of the additional time consumption, more
prone to failures.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
for comparing the image states use the states
defined in the go-ceph avoid creating of the
deplicate const in cephcsi.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
below are the local states of the mirrored image
"unknown" -> If the image is in an error state
means data is completely synced
"error" -> If the image is in an error state
means it needs resync
"syncing"
"starting_replay"
"replaying"
"stopping_replay"
"stopped"
If the resync is successfully started which
means the image will be in "replaying" state.
we can consider "replaying" state to report
resync succesfully going on state.
we are discarding the intermediate states like
"syncing", "starting_replay" and "stopping_replay".
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
After moving moving image to trash, if `trash remove` step fails,
then external-provisioner will issue subsequent requests, in which
image will be absent in pool( will be in trash) and omap cleanup will
be done with stale image left in trash with no `trash remove` step on it.
To avoid this scenario list trash images and find corresponding id for given
image name and add a task to flatten when we encounter a ErrImageNotFound.
Fixes: #1728
Signed-off-by: Rakshith R <rar@redhat.com>
Following the CSI specification, values that are included in the
VolumeUsage MUST NOT be negative. However, CephFS seems to return -1 for
the number of inodes that are available. Instead of returning a
negative value, set it to 0 so that it will not get included in the
encoded JSON response.
Updates: #2579
See-also: 5b0d454015/spec.md (L2477-L2487)
Signed-off-by: Niels de Vos <ndevos@redhat.com>
In some corner case like `re-player shutdown` the
local image will not be in error state. It would
be also worth considering `description` field to
make sure about split-brain.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
previously we were retriving clusterID using the monitors field
in the volume context at node stage code path. however it is possible to
retrieve or use clusterID directly from the volume context. This
commit also remove the getClusterIDFromMigrationVolume() function
which was used previously and its tests
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
we reuse or overload the variable name in the test execution at present.
This commit use a different variable name as initialized in each run
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
For static volume, the user will manually mounts
already existing image as a volume to the application
pods. As its a rbd Image, if the PVC is of type
fileSystem the image will be mapped, formatted
and mounted on the node,
If the user resizes the image on the ceph cluster.
User cannot not automatically resize the filesystem
created on the rbd image. Even if deletes and
recreates the kubernetes objects, the new size
will not be visible on the node.
With this changes During the NodeStageVolumeRequest
the nodeplugin will check the size of the mapped rbd
image on the node using the devicePath. and also
the rbd image size on the ceph cluster.
If the size is not matching it will do the file
system resize on the node as part of the
NodeStageVolumeRequest RPC call.
The user need to do below operation to see new size
* Resize the rbd image in ceph cluster
* Scale down all the application pods using the static
PVC.
* Make sure no application pods which are using the
static PVC is running on a node.
* Scale up all the application pods.
Validate the new size in application pod mounted
volume.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
in NodeStage operation we are flattening
the image to support mounting on the older
clients. this commits moves it to a helper
function to reduce code complexity.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
During PVC snapshot/clone both kms config and passphrase needs to copied,
while for PVC restore only passphrase needs to be copied to dest rbdvol
since destination storageclass may have another kms config.
Signed-off-by: Rakshith R <rar@redhat.com>
This commit adds the logic to detect a passed in volumeID
is a migrated volume ID and if yes, the driver connect to the
backend cluster and clean/delete the image. The logic
only applied if its a migration volume ID. The migration volume ID
carry the information like mons, pool and image name which is
good enough for the driver to identify and connect to the backend
cluster for its operations.
migration volID format:
<mig>_mons-<monsHash>_image-<imageUID>_<poolHash>
Details on the hash values:
* MonsHash: this carry a hash value (md5sum) which will be acted as the
`clusterID` for the operations in this context.
* ImageUID: this is the unique UUID generated by kubernetes for the created
volume.
* PoolHash: this is an encoded string of pool name.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
