There is currently no e2e testing, unit-tests or Helm Chart for NFS
support. Until the functionality is confirmed to be working on a regular
basis, support for NFS provisioner volume will be Alpha.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
The omap is stored with the requested
snapshot name not with the subvolume
snapshotname. This fix uses the correct
snapshot request name to cleanup the omap
once the subvolume snapshot is deleted.
fixes: #2974
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
The `ceph nfs export ...` commands have changed in recent Ceph releases.
Use the most recent command as a default, fall back to the older command
when an error is reported.
This shoud make the NFS-provisioner work on any current Ceph version.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Increase the timeout to 2 minutes to give enough time
for rollback to complete.
As rollback is performed by the force-promote command it,
at times, may take more than a minute
(based on dirty blocks that need to be rolled
back approximately) to rollback.
The added extra 1 minute is useful though to avoid
multiple calls to complete the rollback and in
extremely corner cases to avoid failures in the
first instance of the call when the mirror watcher
is not yet removed (post scaling down the
RBD mirror instance)
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Restoring a snapshot with a new PVC results with a wrong
dataPoolName in case of initial volume linked
to a storageClass with topology constraints and erasure coding.
Signed-off-by: Thibaut Blanchard <thibaut.blanchard@gmail.com>
The README explains some of the requirements and basic configuration for
using the NFS-provisioner. When more deployment artifacts are added, the
README will get extended.
The Rook CephNFS example is included, as it is the easiest to get
started with dynamic provisioning of NFS-volumes.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
NFSVolume instances are short lived, they only extist for a certain gRPC
procedure. It is easier to store the calling Context in the NFSVolume
struct, than to pass it to some of the functions that require it.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
These NFS Controller and Identity servers are the base for the new
provisioner. The functionality is currently extremely limited, follow-up
PRs will implement various CSI procedures.
CreateVolume is implemented with the bare minimum. This makes it
possible to create a volume, and mount it with the
kubernetes-csi/csi-driver-nfs NodePlugin.
DeleteVolume unexports the volume from the Ceph managed NFS-Ganesha
service. In case the Ceph cluster provides multiple NFS-Ganesha
deployments, things might not work as expected. This is going to be
addressed in follow-up improvements.
Lots of TODO comments need to be resolved before this can be declared
"production ready". Unit- and e2e-tests are missing as well.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
The API is extended for generation of the NFS CSIDriver object. The
YAML file under deploy/ was created by `yamlgen`.
The contents of the csidriver.yaml file is heavily based on the upstream
CSIDriver from the Kubernetes csi-driver-nfs project.
Because ./tools/yamlgen uses the API, it gets copied under vendor/ .
This causes two copies of the API to be included in the repository, but
that can not be prevented, it seems.
See-also: https://github.com/kubernetes-csi/csi-driver-nfs/blob/master/deploy/csi-nfs-driverinfo.yaml
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Move the printing of the version and other information to its own
function. This reduces the complexity enough so that golang-ci does not
complain about it anymore.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
RT, reference tracker, is key-based implementation of a reference counter.
Unlike an integer-based counter, RT counts references by tracking unique
keys. This allows accounting in situations where idempotency must be
preserved. It guarantees there will be no duplicit increments or decrements
of the counter.
Signed-off-by: Robert Vasek <robert.vasek@cern.ch>
The sidecar images in minikube deployment will be fetched from
build.env and used/validated accordingly.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
OIDC token file path has been modified from
`/var/run/secrets/token` to `/run/secrets/tokens`.
This has been done to ensure compliance with
FHS 3.0.
refer:
https://refspecs.linuxfoundation.org/FHS_3.0/fhs/ch05s13.html
Signed-off-by: Rakshith R <rar@redhat.com>
Below are the 3 different cases where we need
the PVC namespace for encryption
* CreateVolume:- Read the namespace from the
createVolume parameters and store it in the omap
* NodeStage:- Read the namespace from the omap
not from the volumeContext
* Regenerate:- Read the pvc namespace from the claimRef
not from the volumeAttributes.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
remove kubernetes csi prefixed parameters
from the volumeContext as we dont want
to store it in the PV VolumeAttributes.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
remove kubernetes csi prefixed parameters
from the volumeContext as we dont want
to store it in the PV VolumeAttributes.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
added helper function to strip the kubernetes
specific parameters from the volumeContext as
volumeContext is storaged in the PV volumeAttributes
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
This commit ensures that parent image is flattened before
creating volume.
- If the data source is a PVC, the underlying image's parent
is flattened(which would be a temp clone or snapshot).
hard & soft limit is reduced by 2 to account for depth that
will be added by temp & final clone.
- If the data source is a Snapshot, the underlying image is
itself flattened.
hard & soft limit is reduced by 1 to account for depth that
will be added by the clone which will be restored from the
snapshot.
Flattening step for resulting PVC image restored from snapshot is removed.
Flattening step for temp clone & final image is removed when pvc clone is
being created.
Fixes: #2190
Signed-off-by: Rakshith R <rar@redhat.com>
For retest action's comment `@Mergifyio refresh`
to be accepted by mergifyio,
the bot should have write permissions to the repo.
Therefore, use Ceph-csi-bot instead of github actions
bot.
Signed-off-by: Rakshith R <rar@redhat.com>
"component/nfs" has been added to the labels in the repository, and
Mergify should be able to add that to PRs.
Updates: #2913
Signed-off-by: Niels de Vos <ndevos@redhat.com>
When a test fails, mergifyio kicks that pr out of queue.
Retest action will now comment `@Mergifyio refresh` to
add the pr back into queue, if any test has been restarted.
This makes sure mergifyio rebases the pr automatically
according to the queue.
Signed-off-by: Rakshith R <rar@redhat.com>
as per the CSI standard the size is optional parameter,
as we are allowing the clone to a bigger size
today we need to block the clone to a smaller size
as its a have side effects like data corruption etc.
Note:- Even though this check is present in kubernetes
sidecar as CSI is CO independent adding the check
here.
fixes: #2718
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
These RPCs( nodestage,unstage,volumestats) are
implemented RPCs for our drivers atm. This commit removes
the `unimplemented` responses from the common/default
server initialization routins.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
These RPCs ( controller expand, create and delete snapshots) are
no longer unimplmented and we dont have to declare these as with
`unimplemented` states. This commit remove the same.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
The design for NFS-provising of volumes explains how the existing NFS
CSI Node-Plugin can be used, and what the steps are to create the
NFS-export with Ceph Mgr.
Updates: #2913
Signed-off-by: Niels de Vos <ndevos@redhat.com>
The last option in `ibmkeyprotect-test` example had a extra `,`
at the end, which caused parsing to fail. This commit removes
the same.
Signed-off-by: Rakshith R <rar@redhat.com>
With Amazon STS and kubernetes cluster is configured with
OIDC identity provider, credentials to access Amazon KMS
can be fetched using oidc-token(serviceaccount token).
Each tenant/namespace needs to create a secret with aws region,
role and CMK ARN.
Ceph-CSI will assume the given role with oidc token and access
aws KMS, with given CMK to encrypt/decrypt DEK which will stored
in the image metdata.
Refer: https://docs.aws.amazon.com/STS/latest/APIReference/welcome.htmlResolves: #2879
Signed-off-by: Rakshith R <rar@redhat.com>
Currently, we support
mapOption: "krbd:v1,v2,v3;nbd:v1,v2,v3"
- By omitting `krbd:` or `nbd:`, the option(s) apply to
rbdDefaultMounter which is krbd.
- A user can _override_ the options for a mounter by specifying `krbd:`
or `nbd:`.
mapOption: "v1,v2,v3;nbd:v1,v2,v3"
is effectively the same as the 1st example.
- Sections are split by `;`.
- If users want to specify common options for both `krbd` and `nbd`,
they should mention them twice.
But in case if the krbd or nbd specifc options contian `:` within them,
then the parsing is failing now.
E0301 10:19:13.615111 7348 utils.go:200] ID: 63 Req-ID:
0001-0009-rook-ceph-0000000000000001-fd37c41b-9948-11ec-ad32-0242ac110004
GRPC error: badly formatted map/unmap options:
"krbd:read_from_replica=localize,crush_location=zone:zone1;"
This patch fix the above case where the options itself contain `:`
delimitor
ex: krbd:v1,v2,v3=v31:v32;nbd:v1,v2,v3"
Please note, if you are using such options which contain `:` delimiter,
then it is mandatory to specify the mounter-type.
Fixes: #2910
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
