The Ceph base container-image moved to CentOS Stream 9, so there is no
need to adapt the repositories anymore.
Closes: #4659
Signed-off-by: Niels de Vos <ndevos@ibm.com>
Since CentOS Stream 8 is EOL, this commit updates the
config to use vault.centos.org for CentOS Stream 8.
This should be removed once the base image (ceph) is
updated to a version with a newer CentOS.
Signed-off-by: Praveen M <m.praveen@ibm.com>
Sometimes the Ceph container images seem to have a broken scriptlet
while installing/updating Ceph packages. It is relatively common for
them to fail when `/etc/selinux/config` does not exist. By ensuring the
file directory and file exist (even if empty), the package installation
or upgrades succeed.
Signed-off-by: Niels de Vos <ndevos@ibm.com>
Ceph is minimizing their container-images, which can cause the
`nfs-utils` package to be dropped. As Ceph-CSI supports mounting NFS, it
needs the `/sbin/mount.nfs` executable, so install the package (or a
no-op if it is installed already).
See-also: https://rook-io.slack.com/archives/C46Q5UC05/p1699188662893109
Signed-off-by: Niels de Vos <ndevos@ibm.com>
Some packages have dependencies on other repositories. On occasion these
repositories seem to be out-of-sync. In that case, install updates with
an older version, instead of erroring out.
Signed-off-by: Niels de Vos <ndevos@ibm.com>
The ceph-iscsi repository seems to provide broken metadata or packages.
Ceph-CSI does not need to install them, so disable the repository for
now.
It seems that other repositories gave issues before too, but these
repositories were disabled after installing all available updates. For
ceph-iscsi updating fails already, so disable the repositories before
updating.
Updates: #2034
Signed-off-by: Niels de Vos <ndevos@ibm.com>
This will get updates released after the base image was built. This adds a layer
and increase the image size, but significantly reduce the number of CVEs in the
resultant image.
Signed-off-by: Gert van den Berg <github@mohag.net>
this commit update the packages and then do installation of the
packages in docker build process.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
Cmd to disable apache arrow repo is removed, since
it is no longer needed.
Cmd to disable tcmu repo is added to make build pass.
refer: https://github.com/ceph/ceph-container/issues/2034
Signed-off-by: Rakshith R <rar@redhat.com>
The CentOS 8 repository for Apache Arrow has been removed. This causes
container-image builds fail with the following error:
Errors during downloading metadata for repository 'apache-arrow-centos':
- Status code: 404 for https://apache.jfrog.io/artifactory/arrow/centos/8/x86_64/repodata/repomd.xml (IP: 54.190.66.70)
Error: Failed to download metadata for repo 'apache-arrow-centos': Cannot download repomd.xml: Cannot download repodata/repomd.xml: All mirrors were tried
The Ceph base image has `arrow/centos/8` configured, maybe Apache Arrow
offers a CentOS Stream 8 repository now? Once the Ceph container-image
has been updated, the repository can be enabled again.
Ceph-CSI does not depend on Apache Arrow, so there is no functional
change by disabling the repository.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
When running a simple build with only the required arguments, the
following warning are reported:
$ buildah bud --build-arg=BASE_IMAGE=ceph/ceph:v15 --build-arg=GO_ARCH=amd64 -f ./deploy/cephcsi/image/Dockerfile .
...
STEP 15: COPY . ${SRC_DIR}
STEP 16: RUN make cephcsi
cephcsi image settings: quay.io/cephcsi/cephcsi version canary
make: git: Command not found
make: git: Command not found
if [ ! -d ./vendor ]; then (go mod tidy && go mod vendor); fi
make: git: Command not found
...
STEP 23: COMMIT
Getting image source signatures
...
Writing manifest to image destination
Storing signatures
--> 239b19c4049
git is used to detect the current commit, and store it in the binary
that is built. Without the commit, the "Git Commit:" in the output is
empty, making it impossible to get the exact version:
$ podman run --rm 239b19c4049 --version
Cephcsi Version: canary
Git Commit:
Go Version: go1.15
Compiler: gc
Platform: linux/amd64
Kernel: 5.8.4-200.fc32.x86_64
Signed-off-by: Niels de Vos <ndevos@redhat.com>
`make image-cephcsi` will fail when Golang is not installed. There is no
strict requirement for Golang to be available, it is only used to gather
the architecture of the OS where the image is built. It is possible to
build the image successfully with `make image-cephcsi GOARCH=amd64`.
In case Golang is not installed, GOARCH can not be detected
automatically. This will cause a failure while installing Golang in the
container image. Because the failure is not very clear, display a
warning in the case the GO_ARCH (from ${GOARCH} in the Makefile) is not
set.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
For building a arm64 container image on amd64, it is needed to configure
the system specifically for that. In order to prevent including a amd64
executable in a arm64 image, a check has been added.
When running an arm64 executable on a amd64 system, an error should
occur when cross architecture containers are not supported. This can be
triggered when running `make image-cephcsi GO_ARCH=arm64` on a amd64
system.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
When building with go-ceph, there are several dynamically linked
libraries used directly (libcephfs, librados and librbd), and many more
indirectly.
By adding an additional RUN statement to check if all libraries are
available in the final image, problems related to missing libraries
should be caught before publishing/consuming the image.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
with the help of qemu-user-static we can run
different architecute contains.
more info at https://github.com/multiarch/qemu-user-static
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Add support for multi architecture build
for cephcsi. with multistage docker build
we we build cephcsi binary for both arm64
and amd64 architecture.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
As we have the octopus as the latest
release base image,this PR updates the
base image in Dockerfile
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Update CI merge job to build and push Arm64 image to
quay.io/cephcsi/cephcsi:version-arm64.
Add CI PR job running on Travis Arm64 nodes to make sure cephcsi
compiles successfully on Arm64.
No CI test job is availabe for Arm64 now due to below issues
- k8s-csi sidecar images for Arm64 are not available
- Travis Arm64 CI job runs inside unprivileged LXD which blocks
launching minikube test environment
Signed-off-by: Yibo Cai <yibo.cai@arm.com>
currently, we have 3 docker files(cephcsi,rbd,cephfs) in the ceph-csi repo.
[commit ](85e121ebfe)
added by John to build a single image which can act as rbd or
cephfs based on the input configuration.
This PR updates the makefile and kubernetes templates to use
the unified image and also its deletes the other two dockerfiles.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
