This PR makes the changes in csi templates and
upgrade documentation required for updating
csi sidecar images.
Signed-off-by: Mudit Agarwal <muagarwa@redhat.com>
updated deployment template for the new controller and
also added `update` configmap RBAC for the controller
as the controller uses the configmap for the leader
election.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
When running a simple build with only the required arguments, the
following warning are reported:
$ buildah bud --build-arg=BASE_IMAGE=ceph/ceph:v15 --build-arg=GO_ARCH=amd64 -f ./deploy/cephcsi/image/Dockerfile .
...
STEP 15: COPY . ${SRC_DIR}
STEP 16: RUN make cephcsi
cephcsi image settings: quay.io/cephcsi/cephcsi version canary
make: git: Command not found
make: git: Command not found
if [ ! -d ./vendor ]; then (go mod tidy && go mod vendor); fi
make: git: Command not found
...
STEP 23: COMMIT
Getting image source signatures
...
Writing manifest to image destination
Storing signatures
--> 239b19c4049
git is used to detect the current commit, and store it in the binary
that is built. Without the commit, the "Git Commit:" in the output is
empty, making it impossible to get the exact version:
$ podman run --rm 239b19c4049 --version
Cephcsi Version: canary
Git Commit:
Go Version: go1.15
Compiler: gc
Platform: linux/amd64
Kernel: 5.8.4-200.fc32.x86_64
Signed-off-by: Niels de Vos <ndevos@redhat.com>
The added anti-affinity rules prevent provisioner operators from scheduling on
the same nodes. The kubernetes scheduler will spread the pods across nodes to
improve availability during node failures.
Signed-off-by: Nico Berlee <nico.berlee@on2it.net>
The lifecycle preStop hook fails on container stop / exit
because /bin/sh is not present in the driver registrar container
image.
the driver-registrar will remove the socket file
before stopping. we dont need to have any preStop hook
to remove the socket as it was not working as expected
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
The aggregate clusterrole were designed for the scenario where
the rules are not completely owned by one component.
the aggregate rules can be removed and simplify
certain issues around upgrades.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
as v1.0.0 is deprecated we need to remove the support
for it in the Next coming (v3.0.0) release. This PR
removes the support for the same.
closes#882
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
`make image-cephcsi` will fail when Golang is not installed. There is no
strict requirement for Golang to be available, it is only used to gather
the architecture of the OS where the image is built. It is possible to
build the image successfully with `make image-cephcsi GOARCH=amd64`.
In case Golang is not installed, GOARCH can not be detected
automatically. This will cause a failure while installing Golang in the
container image. Because the failure is not very clear, display a
warning in the case the GO_ARCH (from ${GOARCH} in the Makefile) is not
set.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
added Hardlimit and Softlimit flags for cephcsi
arguments. When the Softlimit is reached cephcsi
will start a background task to flatten the rbd
image and return success and if the hardlimit
is reached it will start a background task
to flatten the rbd image and return ready
to use as false to make sure that the image
will not be used until it is flatten.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
For building a arm64 container image on amd64, it is needed to configure
the system specifically for that. In order to prevent including a amd64
executable in a arm64 image, a check has been added.
When running an arm64 executable on a amd64 system, an error should
occur when cross architecture containers are not supported. This can be
triggered when running `make image-cephcsi GO_ARCH=arm64` on a amd64
system.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Considering this parameter is available for other sidecars we should
have a parity between the sidecars. Adding it for the same reason
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
When building with go-ceph, there are several dynamically linked
libraries used directly (libcephfs, librados and librbd), and many more
indirectly.
By adding an additional RUN statement to check if all libraries are
available in the final image, problems related to missing libraries
should be caught before publishing/consuming the image.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
unlike other containers, image pull policy of
csi-snapshotter was set to "Always", which can
be changed to pull only if not present.
Signed-off-by: Yug Gupta <ygupta@redhat.com>
with the help of qemu-user-static we can run
different architecute contains.
more info at https://github.com/multiarch/qemu-user-static
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Add support for multi architecture build
for cephcsi. with multistage docker build
we we build cephcsi binary for both arm64
and amd64 architecture.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Recently resizer 0.5.0 has been released.
This PR updated the resizer container from
v0.4.0 to v0.5.0
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
As kubernetes CSI sidecar is exposing the
GRPC mertics we can make use of the same in
ceph-csi we dont need to expose our own.
update: #881
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
As we have the octopus as the latest
release base image,this PR updates the
base image in Dockerfile
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
There are currently unwanted RBAC permission
is given for ceph-csi, This PR reduces removes
such unwanted RBAC resources.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
PR #282 introduces the mount cache to
solve cephfs fuse mount issue when cephfs plugin pod
restarts .This is not working as intended. This PR removes
the code for maintainability.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
- adds proposal document for PVC encryption from PR448
- adds per-volume encription by generating encryption passphrase
for each volume and storing it in a KMS
- adds HashiCorp Vault integration as a KMS for encryption passphrases
- avoids encrypting volume second time if it was already encrypted but
no file system created
- avoids unnecessary checks if volume is a mapped device when encryption
was not requested
- prevents resizing encrypted volumes (it is not currently supported)
- prevents creating snapshots from encrypted volumes to prevent attack
on encryption key (security guard until re-encryption of volumes
implemented)
Signed-off-by: Vasyl Purchel vasyl.purchel@workday.com
Signed-off-by: Andrea Baglioni andrea.baglioni@workday.comFixes#420Fixes#744
`/run/mount` need to be share between host and
csi-plugin containers for `/run/mount/utab`
this is required to ensures that the network
is not stopped prior to unmounting the network devices.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
On systems with SELinux enabled, non-privileged containers
can't access data of privileged containers. Since the socket
is exposed by privileged containers, all sidecars must be
privileged too. This is needed only for containers running
in daemonset as we are using bidirectional mounts in daemonset
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
currently, we are making use of host path directory
to store the provisioner socket, as this
the socket is not needed by anyone else other than
containers inside the provisioner pod using the
empty directory to store this socket is the best option.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Update CI merge job to build and push Arm64 image to
quay.io/cephcsi/cephcsi:version-arm64.
Add CI PR job running on Travis Arm64 nodes to make sure cephcsi
compiles successfully on Arm64.
No CI test job is availabe for Arm64 now due to below issues
- k8s-csi sidecar images for Arm64 are not available
- Travis Arm64 CI job runs inside unprivileged LXD which blocks
launching minikube test environment
Signed-off-by: Yibo Cai <yibo.cai@arm.com>
this time out value to 150s or higher. The higher timeout value can help to reduce the
load of our backend ceph cluster and also can avoid throttling issues at sidecars to an extent.
Fix# #602
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
rootfs dependency was removed from rbd
by removing support for `nsenter`, This
PR removed the `/` mount from provisioner
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
if both controller and nodeserver flags are set/unset
cephcsi will start both server,
if only one flag is set, it will start relavent
service.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
The container runtime CRI-O limits the number of PIDs to 1024 by
default. When many PVCs are requested at the same time, it is possible
for the provisioner to start too many threads (or go routines) and
executing 'rbd' commands can start to fail. In case a go routine can not
get started, the process panics.
The PID limit can be changed by passing an argument to kubelet, but this
will affect all pids running on a host. Changing the parameters to
kubelet is also not a very elegant solution.
Instead, the provisioner pod can change the configuration itself. The
pod is running in privileged mode and can write to /sys/fs/cgroup where
the limit is configured.
With this change, the limit is configured to 'max', just as if there is
no limit at all. The logs of the csi-rbdplugin in the provisioner pod
will reflect the change it makes when starting the service:
$ oc -n rook-ceph logs -c csi-rbdplugin csi-rbdplugin-provisioner-0
..
I0726 13:59:19.737678 1 cephcsi.go:127] Initial PID limit is set to 1024
I0726 13:59:19.737746 1 cephcsi.go:136] Reconfigured PID limit to -1 (max)
..
It is possible to pass a different limit on the commandline of the
cephcsi executable. The following flag has been added:
--pidlimit=<int> the PID limit to configure through cgroups
This accepts special values -1 (max) and 0 (default, do not
reconfigure). Other integers will be the limit that gets configured in
cgroups.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
This change also starts mapping nbd based access using ther rbd CLI
as, it is a prerequisite to get device listing for nbd as well.
Signed-off-by: ShyamsundarR <srangana@redhat.com>
Use Deployment with leader election instead of StatefulSet
Deployment behaves better when a node gets disconnected
from the rest of the cluster - new provisioner leader
is elected in ~15 seconds, while it may take up to
5 minutes for StatefulSet to start a new replica.
Refer: kubernetes-csi/external-provisioner@52d1fbc
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Every Ceph CLI that is invoked at present passes the key via the
--key option, and hence is exposed to key being displayed on
the host using a ps command or such means.
This commit addresses this issue by stashing the key in a tmp
file, which is again created on a tmpfs (or empty dir backed by
memory). Further using such tmp files as arguments to the --keyfile
option for every CLI that is invoked.
This prevents the key from being visible as part of the argument list
of the invoked program on the system.
Fixes: #318
Signed-off-by: ShyamsundarR <srangana@redhat.com>
in NodeStage RPC call we have to map the
device to the node plugin and make sure the
the device will be mounted to the global path
in nodeUnstage request unmount the device from
global path and unmap the device
if the volume mode is block we will be creating
a file inside a stageTargetPath and it will be
considered as the global path
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
As detailed in issue #279, current lock scheme has hash
buckets that are count of CPUs. This causes a lot of contention
when parallel requests are made to the CSI plugin. To reduce
lock contention, this commit introduces granular locks per
identifier.
The commit also changes the timeout for gRPC requests to Create
and Delete volumes, as the current timeout is 10s (kubernetes
documentation says 15s but code defaults are 10s). A virtual
setup takes about 12-15s to complete a request at times, that leads
to unwanted retries of the same request, hence the increased
timeout to enable operation completion with minimal retries.
Tests to create PVCs before and after these changes look like so,
Before:
Default master code + sidecar provisioner --timeout option set
to 30 seconds
20 PVCs
Creation: 3 runs, 396/391/400 seconds
Deletion: 3 runs, 218/271/118 seconds
- Once was stalled for more than 8 minutes and cancelled the run
After:
Current commit + sidecar provisioner --timeout option set to 30 sec
20 PVCs
Creation: 3 runs, 42/59/65 seconds
Deletion: 3 runs, 32/32/31 seconds
Fixes: #279
Signed-off-by: ShyamsundarR <srangana@redhat.com>
Deployment behaves better when a node gets disconnected from the rest of
the cluster - new provisioner leader is elected in ~15 seconds, while
it may take up to 5 minutes for StatefulSet to start a new replica.
Refer: 52d1fbcf9dFixes: #335
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
This is a part of the stateless set of commits for CephCSI.
This commit removes the dependency on config maps to store cephFS provisioned
volumes, and instead relies on RADOS based objects and keys, and required
CSI VolumeID encoding to detect the provisioned volumes.
Changes:
- Provide backward compatibility to provisioned volumes by older plugin versions (1.0.0 or older)
- Remove Create/Delete support for statically provisioned volumes (fixes#382)
- Added namespace support to RADOS OMaps and used the same to store RADOS CSI objects and keys in the CephFS metadata pool
- Added support to mention fsname for CephFS provisioning (fixes#359)
- Changed field name in CSI Identifier to 'location', to denote a pool or fscid
- Updated mounter cache to use new scheme
- Required Helm manifests are updated
- Required documentation and other manifests are updated
- Made driver option 'metadatastorage' as optional, as fresh installs do not need to specify the same
Testing done:
- Create/Mount/Delete PVC
- Create/Delete 5 PVCs
- Mount version 1.0.0 PVC
- Delete version 1.0.0 PV
- Mount Statically defined PV/PVC/Pod
- Mount Statically defined version 1.0.0 PV/PVC/Pod
- Delete Statically defined version 1.0.0 PV/PVC/Pod
- Node restart when mounted to test mountcache
- Use InstanceID other than 'default'
- RBD basic round of tests, as namespace is added to OMaps
- csitest against ceph-fs plugin
- NOTE: CephFS plugin still does not detect and address already created
volumes but of a different size
- Test not providing any value to the metadata storage parameter
Signed-off-by: ShyamsundarR <srangana@redhat.com>
currently, we have 3 docker files(cephcsi,rbd,cephfs) in the ceph-csi repo.
[commit ](85e121ebfe)
added by John to build a single image which can act as rbd or
cephfs based on the input configuration.
This PR updates the makefile and kubernetes templates to use
the unified image and also its deletes the other two dockerfiles.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Existing config maps are now replaced with rados omaps that help
store information regarding the requested volume names and the rbd
image names backing the same.
Further to detect cluster, pool and which image a volume ID refers
to, changes to volume ID encoding has been done as per provided
design specification in the stateless ceph-csi proposal.
Additional changes and updates,
- Updated documentation
- Updated manifests
- Updated Helm chart
- Addressed a few csi-test failures
Signed-off-by: ShyamsundarR <srangana@redhat.com>
The kubernetes manifests and Helm templates have been updated to use
aggregated ClusterRoles. The same change has been done in Rook as well.
Refer rook/rook#2634 and rook/rook#2975
Signed-off-by: Kaushal M <kshlmster@gmail.com>
PR #290 missed the update permission to persistentvolumes.
Without that permission, you will get the following error when attaching a RBD volume to a pod:
```
Warning FailedAttachVolume 100s (x11 over 7m52s) attachdetach-controller AttachVolume.Attach failed for volume "pvc-d23f8745-60bb-11e9-bd35-5254001c78d6" : could not add PersistentVolume finalizer: persistentvolumes "pvc-d23f8745-60bb-11e9-bd35-5254001c78d6" is forbidden: User "system:serviceaccount:kube-system:rbd-csi-provisioner" cannot update resource "persistentvolumes" in API group "" at the cluster scope
```
if attacher is not enabled, we need to
create the csidriver CRD with spec
to make attachRequired as false to
skip volume attach check in kube.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
adding the condition will help us
to easily remove the attacher later.
or even we can add else condition
if we have an alternate to attacher.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
currently we are deploying external-attacher
as a seperate statefulset, which leads to
attacher communicating with the node provisoner
daemonset, This PR deploys external-attacher
as a sidecar container inside provisioner
statefulset, so that external-provisioner
always communicates with the plugin responsible
for the provision controller capcabilities.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Based on the review comments addressed the following,
- Moved away from having to update the pod with volumes
when a new Ceph cluster is added for provisioning via the
CSI driver
- The above now used k8s APIs to fetch secrets
- TBD: Need to add a watch mechanisim such that these
secrets can be cached and updated when changed
- Folded the Cephc configuration and ID/key config map
and secrets into a single secret
- Provided the ability to read the same config via mapped
or created files within the pod
Tests:
- Ran PV creation/deletion/attach/use using new scheme
StorageClass
- Ran PV creation/deletion/attach/use using older scheme
to ensure nothing is broken
- Did not execute snapshot related tests
Signed-off-by: ShyamsundarR <srangana@redhat.com>
as the socket directory will be created
inside the container no need to follow
the plugin name in for the directory
creation, this will also reduce the code
changes if we want to change driver name.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
remove unwanted rules and update
rbac to have permission to modify
endpoints and configmaps in the
current namespace.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
remove unwanted rules and update
rbac to have permission to modify
endpoints and configmaps in the
current namespace.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
