k8s.io/utils/mount has moved to k8s.io/mount-utils, and Ceph-CSI uses
that already in most locations. Only internal/util/util.go still imports
the old path.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
adding e2e testcase to validate the workflow
of pvc creation and attaching to pod works for
new image features like fast-diff,obj-map,exclusive-lock
and layering.
fixes: #2695
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
The dummy image will be created with 1Mib size.
during the snapshot transfer operation the 1Mib
will be transferred even if the dummy image doesnot
contains any data. adding the new image features
`fast-diff,layering,obj-map,exclusive-lock`on the
dummy image will ensure that only the diff is
transferred to the remote cluster.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
we added a workaround for rbd scheduling by creating
a dummy image in #2656. with the fix we are creating
a dummy image of the size of the first actual rbd
image which is sent in EnableVolumeReplication request
if the actual rbd image size is 1TiB we are creating
a dummy image of 1TiB which is not good. even though
its a thin provisioned rbd images this is causing
issue for the transfer of the snapshot during
the mirroring operation.
This commit recreates the rbd image with 1MiB size
which is the smaller supported size in rbd.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Currently, we are skipping the generic ephemeral
testing if the kubernetes version is less than
1.21 because of this one the who test suite is
getting skipped and e2e is marked as success
in 2 minutes. This commit runs the ephemeral
tests if the kube=>1.21+. If we do this, for
the lower version we can run other tests.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
rbd mirroring CLI calls are async and it doesn't wait
for the operation to be completed. ex:- `rbd mirror image enable`
it will enable the mirroring on the image but it doesn't
ensure that the image is mirroring enabled and healthy
primary. The same goes for the promote volume also.
This commits adds a check-in PromoteVolume to make sure
the image in a healthy state i.e `up+stopped`.
note:- not considering any intermediate states to make
sure the image is completely healthy before responding
success to the RPC call.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Journal-based RADOS block device mirroring ensures point-in-time
consistent replicas of all changes to an image, including reads and
writes, block device resizing, snapshots, clones, and flattening.
Journaling-based mirroring records all modifications to an image in the
order in which they occur. This ensures that a crash-consistent mirror
of an image is available.
Mirroring when configured in journal mode, mirroring will
utilize the RBD journaling image feature to replicate the image
contents. If the RBD journaling image feature is not yet enabled on the
image, it will be automatically enabled.
Fixes: #2018
Co-authored-by: Madhu Rajanna <madhupr007@gmail.com>
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Depending on the way Ceph-CSI is deployed, the capabilities will be
configured for the GetCapabilities procedure. The other procedures are
more straight-forward.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
After adding the new CSI-Addons Server, golang-ci complains that
driver.Run() is too complex. By moving the profiling checks and starting
of the go-routines in their own function, golang-ci is happy again.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Add a new CSI-Addons Server and empty Identity Service for the RBD
plugin. The implementation of the Identity Service procedure calls will
be done in other PRs.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
When generating csiconfiguration from values the config.json key gets merged with cluster-mapping.json
as the config.json toYaml element supresses a newline.
This fixes the situation where configuration is generated as shown;
```
data:
config.json: |-
[{"clusterID":"....","monitors":["..."]}]cluster-mapping.json: |-
[]
```
Signed-off-by: Toby Jackson <toby@warmfusion.co.uk>
Github's list statuses returns list of all status, possibly
containing dupicates and previously failed statuses.
Use "UpdatedAt" timestamp to only get the latest status
for each test.
Signed-off-by: Rakshith R <rar@redhat.com>
Version field for helm Chart.yaml needs to have SemVer 2
compatible value, therefore use "<MAJOR-VERSION>-canary"
on "devel" branch.
Refer: https://helm.sh/docs/topics/charts/#the-chartyaml-file
Signed-off-by: Rakshith R <rar@redhat.com>
The e2e sometimes fail getting objects like PVCs from the Kubernetes API
server, and log the following error:
Error getting pvc "rbd-6940" in namespace "rbd-694": rpc error: code = Unknown desc = OK: HTTP status code 200; transport: missing content-type field
By checking the error message, and initiating a retry on this failure,
CI jobs should fail less regulary.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
It seems that the matching condition on the modified files with
-files~=^(!?actions/)
validates to 'true' when that is not intended. The example in the
Mergify documentation does not seem to be correct :-/
This reverts commit 411bf33a3d.
See-also: https://docs.mergify.com/examples/#merging-based-on-modified-files
Signed-off-by: Niels de Vos <ndevos@redhat.com>
PRs that contain `mergify` or `Mergify` in the subject should both match
the rule to add labels. The regular expressions can include `(?i)` to
make the matching case-insensitive.
See-also: https://docs.mergify.com/configuration/#regular-expressions
Signed-off-by: Niels de Vos <ndevos@redhat.com>
The matching checks the list of modified files, and if it does not
contain anything outside the `actions/` directory, the labels are
applied.
Actions are not tested with e2e, so changes can be labelled to skip
these time and resource intensive tests.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Add tests for RWX and ROX accessModes for Block and FileSystem Mode
PVCs.
Fixes: #2262
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
currently we are fist operating on the dummy
image to refresh the pool and then we are adding
the scheduling. we think the scheduling should
be added first and than we should refresh the
pool. If we do this all the existing schedules
will be considered from the scheduler.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
with shallow copy of rbdVol to dummyVol
the image name update of the dummyVol is getting
reflected on the rbdVol which we dont want.
do deep copy to avoid this problem.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Uses the below schema to supply mounter specific map/unmapOptions to the
nodeplugin based on the discussion we all had at
https://github.com/ceph/ceph-csi/pull/2636
This should specifically be really helpful with the `tryOthermonters`
set to true, i.e with fallback mechanism settings turned ON.
mapOption: "kbrd:v1,v2,v3;nbd:v1,v2,v3"
- By omitting `krbd:` or `nbd:`, the option(s) apply to
rbdDefaultMounter which is krbd.
- A user can _override_ the options for a mounter by specifying `krbd:`
or `nbd:`.
mapOption: "v1,v2,v3;nbd:v1,v2,v3"
is effectively the same as the 1st example.
- Sections are split by `;`.
- If users want to specify common options for both `krbd` and `nbd`,
they should mention them twice.
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
To make the error return consistent across e2e tests we have decided
to remove with error presence from the logs and this commit
does that for e2e/snapshot.go.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
To make the error return consistent across e2e tests we have decided
to remove with error presence from the logs and this commit
does that for e2e/cephfs_helper.go.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
To make the error return consistent across e2e tests we have decided
to remove with error presence from the logs and this commit
does that for e2e/upgrade-rbd.go.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
To make the error return consistent across e2e tests we have decided
to remove with error presence from the logs and this commit
does that for e2e/upgrade-cephfs.go.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
To make the error return consistent across e2e tests we have decided
to remove with error presence from the logs and this commit
does that for e2e/rbd_helper.go.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
To make the error return consistent across e2e tests we have decided
to remove with error presence from the logs and this commit
does that for e2e/ceph_user.go.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
To make the error return consistent across e2e tests we have decided
to remove with error presence from the logs and this commit
does that for e2e/utils.go.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
To make the error return consistent across e2e tests we have decided
to remove `with error` presence from the logs and this commit
does that for cephfs tests.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
To make the error return consistent across e2e tests we have decided
to remove `with error` presence from the logs and this commit
does that for rbd tests.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
The `expandCSIVolumes` feature gate is beta since kubernetes 1.16
version and we no longer wanted to explictly enable it in the
deployment.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
This commit adds the validation of csi cephfs driver to work with
ephemeral volume support. With ephemeral volume support a user can
specify ephemeral volumes in its pod spec and tie the lifecycle
of the PVC with the POD.
An example POD spec also included in this commit.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
