/* * * Copyright 2014 gRPC authors. * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * */ package grpc import ( "context" "errors" "io" "math" "math/rand" "strconv" "sync" "time" "google.golang.org/grpc/balancer" "google.golang.org/grpc/codes" "google.golang.org/grpc/encoding" "google.golang.org/grpc/internal" "google.golang.org/grpc/internal/balancerload" "google.golang.org/grpc/internal/binarylog" "google.golang.org/grpc/internal/channelz" "google.golang.org/grpc/internal/grpcutil" imetadata "google.golang.org/grpc/internal/metadata" iresolver "google.golang.org/grpc/internal/resolver" "google.golang.org/grpc/internal/serviceconfig" istatus "google.golang.org/grpc/internal/status" "google.golang.org/grpc/internal/transport" "google.golang.org/grpc/metadata" "google.golang.org/grpc/peer" "google.golang.org/grpc/stats" "google.golang.org/grpc/status" ) var metadataFromOutgoingContextRaw = internal.FromOutgoingContextRaw.(func(context.Context) (metadata.MD, [][]string, bool)) // StreamHandler defines the handler called by gRPC server to complete the // execution of a streaming RPC. // // If a StreamHandler returns an error, it should either be produced by the // status package, or be one of the context errors. Otherwise, gRPC will use // codes.Unknown as the status code and err.Error() as the status message of the // RPC. type StreamHandler func(srv any, stream ServerStream) error // StreamDesc represents a streaming RPC service's method specification. Used // on the server when registering services and on the client when initiating // new streams. type StreamDesc struct { // StreamName and Handler are only used when registering handlers on a // server. StreamName string // the name of the method excluding the service Handler StreamHandler // the handler called for the method // ServerStreams and ClientStreams are used for registering handlers on a // server as well as defining RPC behavior when passed to NewClientStream // and ClientConn.NewStream. At least one must be true. ServerStreams bool // indicates the server can perform streaming sends ClientStreams bool // indicates the client can perform streaming sends } // Stream defines the common interface a client or server stream has to satisfy. // // Deprecated: See ClientStream and ServerStream documentation instead. type Stream interface { // Deprecated: See ClientStream and ServerStream documentation instead. Context() context.Context // Deprecated: See ClientStream and ServerStream documentation instead. SendMsg(m any) error // Deprecated: See ClientStream and ServerStream documentation instead. RecvMsg(m any) error } // ClientStream defines the client-side behavior of a streaming RPC. // // All errors returned from ClientStream methods are compatible with the // status package. type ClientStream interface { // Header returns the header metadata received from the server if there // is any. It blocks if the metadata is not ready to read. If the metadata // is nil and the error is also nil, then the stream was terminated without // headers, and the status can be discovered by calling RecvMsg. Header() (metadata.MD, error) // Trailer returns the trailer metadata from the server, if there is any. // It must only be called after stream.CloseAndRecv has returned, or // stream.Recv has returned a non-nil error (including io.EOF). Trailer() metadata.MD // CloseSend closes the send direction of the stream. It closes the stream // when non-nil error is met. It is also not safe to call CloseSend // concurrently with SendMsg. CloseSend() error // Context returns the context for this stream. // // It should not be called until after Header or RecvMsg has returned. Once // called, subsequent client-side retries are disabled. Context() context.Context // SendMsg is generally called by generated code. On error, SendMsg aborts // the stream. If the error was generated by the client, the status is // returned directly; otherwise, io.EOF is returned and the status of // the stream may be discovered using RecvMsg. // // SendMsg blocks until: // - There is sufficient flow control to schedule m with the transport, or // - The stream is done, or // - The stream breaks. // // SendMsg does not wait until the message is received by the server. An // untimely stream closure may result in lost messages. To ensure delivery, // users should ensure the RPC completed successfully using RecvMsg. // // It is safe to have a goroutine calling SendMsg and another goroutine // calling RecvMsg on the same stream at the same time, but it is not safe // to call SendMsg on the same stream in different goroutines. It is also // not safe to call CloseSend concurrently with SendMsg. // // It is not safe to modify the message after calling SendMsg. Tracing // libraries and stats handlers may use the message lazily. SendMsg(m any) error // RecvMsg blocks until it receives a message into m or the stream is // done. It returns io.EOF when the stream completes successfully. On // any other error, the stream is aborted and the error contains the RPC // status. // // It is safe to have a goroutine calling SendMsg and another goroutine // calling RecvMsg on the same stream at the same time, but it is not // safe to call RecvMsg on the same stream in different goroutines. RecvMsg(m any) error } // NewStream creates a new Stream for the client side. This is typically // called by generated code. ctx is used for the lifetime of the stream. // // To ensure resources are not leaked due to the stream returned, one of the following // actions must be performed: // // 1. Call Close on the ClientConn. // 2. Cancel the context provided. // 3. Call RecvMsg until a non-nil error is returned. A protobuf-generated // client-streaming RPC, for instance, might use the helper function // CloseAndRecv (note that CloseSend does not Recv, therefore is not // guaranteed to release all resources). // 4. Receive a non-nil, non-io.EOF error from Header or SendMsg. // // If none of the above happen, a goroutine and a context will be leaked, and grpc // will not call the optionally-configured stats handler with a stats.End message. func (cc *ClientConn) NewStream(ctx context.Context, desc *StreamDesc, method string, opts ...CallOption) (ClientStream, error) { // allow interceptor to see all applicable call options, which means those // configured as defaults from dial option as well as per-call options opts = combine(cc.dopts.callOptions, opts) if cc.dopts.streamInt != nil { return cc.dopts.streamInt(ctx, desc, cc, method, newClientStream, opts...) } return newClientStream(ctx, desc, cc, method, opts...) } // NewClientStream is a wrapper for ClientConn.NewStream. func NewClientStream(ctx context.Context, desc *StreamDesc, cc *ClientConn, method string, opts ...CallOption) (ClientStream, error) { return cc.NewStream(ctx, desc, method, opts...) } func newClientStream(ctx context.Context, desc *StreamDesc, cc *ClientConn, method string, opts ...CallOption) (_ ClientStream, err error) { // Start tracking the RPC for idleness purposes. This is where a stream is // created for both streaming and unary RPCs, and hence is a good place to // track active RPC count. if err := cc.idlenessMgr.OnCallBegin(); err != nil { return nil, err } // Add a calloption, to decrement the active call count, that gets executed // when the RPC completes. opts = append([]CallOption{OnFinish(func(error) { cc.idlenessMgr.OnCallEnd() })}, opts...) if md, added, ok := metadataFromOutgoingContextRaw(ctx); ok { // validate md if err := imetadata.Validate(md); err != nil { return nil, status.Error(codes.Internal, err.Error()) } // validate added for _, kvs := range added { for i := 0; i < len(kvs); i += 2 { if err := imetadata.ValidatePair(kvs[i], kvs[i+1]); err != nil { return nil, status.Error(codes.Internal, err.Error()) } } } } if channelz.IsOn() { cc.incrCallsStarted() defer func() { if err != nil { cc.incrCallsFailed() } }() } // Provide an opportunity for the first RPC to see the first service config // provided by the resolver. if err := cc.waitForResolvedAddrs(ctx); err != nil { return nil, err } var mc serviceconfig.MethodConfig var onCommit func() var newStream = func(ctx context.Context, done func()) (iresolver.ClientStream, error) { return newClientStreamWithParams(ctx, desc, cc, method, mc, onCommit, done, opts...) } rpcInfo := iresolver.RPCInfo{Context: ctx, Method: method} rpcConfig, err := cc.safeConfigSelector.SelectConfig(rpcInfo) if err != nil { if st, ok := status.FromError(err); ok { // Restrict the code to the list allowed by gRFC A54. if istatus.IsRestrictedControlPlaneCode(st) { err = status.Errorf(codes.Internal, "config selector returned illegal status: %v", err) } return nil, err } return nil, toRPCErr(err) } if rpcConfig != nil { if rpcConfig.Context != nil { ctx = rpcConfig.Context } mc = rpcConfig.MethodConfig onCommit = rpcConfig.OnCommitted if rpcConfig.Interceptor != nil { rpcInfo.Context = nil ns := newStream newStream = func(ctx context.Context, done func()) (iresolver.ClientStream, error) { cs, err := rpcConfig.Interceptor.NewStream(ctx, rpcInfo, done, ns) if err != nil { return nil, toRPCErr(err) } return cs, nil } } } return newStream(ctx, func() {}) } func newClientStreamWithParams(ctx context.Context, desc *StreamDesc, cc *ClientConn, method string, mc serviceconfig.MethodConfig, onCommit, doneFunc func(), opts ...CallOption) (_ iresolver.ClientStream, err error) { c := defaultCallInfo() if mc.WaitForReady != nil { c.failFast = !*mc.WaitForReady } // Possible context leak: // The cancel function for the child context we create will only be called // when RecvMsg returns a non-nil error, if the ClientConn is closed, or if // an error is generated by SendMsg. // https://github.com/grpc/grpc-go/issues/1818. var cancel context.CancelFunc if mc.Timeout != nil && *mc.Timeout >= 0 { ctx, cancel = context.WithTimeout(ctx, *mc.Timeout) } else { ctx, cancel = context.WithCancel(ctx) } defer func() { if err != nil { cancel() } }() for _, o := range opts { if err := o.before(c); err != nil { return nil, toRPCErr(err) } } c.maxSendMessageSize = getMaxSize(mc.MaxReqSize, c.maxSendMessageSize, defaultClientMaxSendMessageSize) c.maxReceiveMessageSize = getMaxSize(mc.MaxRespSize, c.maxReceiveMessageSize, defaultClientMaxReceiveMessageSize) if err := setCallInfoCodec(c); err != nil { return nil, err } callHdr := &transport.CallHdr{ Host: cc.authority, Method: method, ContentSubtype: c.contentSubtype, DoneFunc: doneFunc, } // Set our outgoing compression according to the UseCompressor CallOption, if // set. In that case, also find the compressor from the encoding package. // Otherwise, use the compressor configured by the WithCompressor DialOption, // if set. var cp Compressor var comp encoding.Compressor if ct := c.compressorType; ct != "" { callHdr.SendCompress = ct if ct != encoding.Identity { comp = encoding.GetCompressor(ct) if comp == nil { return nil, status.Errorf(codes.Internal, "grpc: Compressor is not installed for requested grpc-encoding %q", ct) } } } else if cc.dopts.cp != nil { callHdr.SendCompress = cc.dopts.cp.Type() cp = cc.dopts.cp } if c.creds != nil { callHdr.Creds = c.creds } cs := &clientStream{ callHdr: callHdr, ctx: ctx, methodConfig: &mc, opts: opts, callInfo: c, cc: cc, desc: desc, codec: c.codec, cp: cp, comp: comp, cancel: cancel, firstAttempt: true, onCommit: onCommit, } if !cc.dopts.disableRetry { cs.retryThrottler = cc.retryThrottler.Load().(*retryThrottler) } if ml := binarylog.GetMethodLogger(method); ml != nil { cs.binlogs = append(cs.binlogs, ml) } if cc.dopts.binaryLogger != nil { if ml := cc.dopts.binaryLogger.GetMethodLogger(method); ml != nil { cs.binlogs = append(cs.binlogs, ml) } } // Pick the transport to use and create a new stream on the transport. // Assign cs.attempt upon success. op := func(a *csAttempt) error { if err := a.getTransport(); err != nil { return err } if err := a.newStream(); err != nil { return err } // Because this operation is always called either here (while creating // the clientStream) or by the retry code while locked when replaying // the operation, it is safe to access cs.attempt directly. cs.attempt = a return nil } if err := cs.withRetry(op, func() { cs.bufferForRetryLocked(0, op) }); err != nil { return nil, err } if len(cs.binlogs) != 0 { md, _ := metadata.FromOutgoingContext(ctx) logEntry := &binarylog.ClientHeader{ OnClientSide: true, Header: md, MethodName: method, Authority: cs.cc.authority, } if deadline, ok := ctx.Deadline(); ok { logEntry.Timeout = time.Until(deadline) if logEntry.Timeout < 0 { logEntry.Timeout = 0 } } for _, binlog := range cs.binlogs { binlog.Log(cs.ctx, logEntry) } } if desc != unaryStreamDesc { // Listen on cc and stream contexts to cleanup when the user closes the // ClientConn or cancels the stream context. In all other cases, an error // should already be injected into the recv buffer by the transport, which // the client will eventually receive, and then we will cancel the stream's // context in clientStream.finish. go func() { select { case <-cc.ctx.Done(): cs.finish(ErrClientConnClosing) case <-ctx.Done(): cs.finish(toRPCErr(ctx.Err())) } }() } return cs, nil } // newAttemptLocked creates a new csAttempt without a transport or stream. func (cs *clientStream) newAttemptLocked(isTransparent bool) (*csAttempt, error) { if err := cs.ctx.Err(); err != nil { return nil, toRPCErr(err) } if err := cs.cc.ctx.Err(); err != nil { return nil, ErrClientConnClosing } ctx := newContextWithRPCInfo(cs.ctx, cs.callInfo.failFast, cs.callInfo.codec, cs.cp, cs.comp) method := cs.callHdr.Method var beginTime time.Time shs := cs.cc.dopts.copts.StatsHandlers for _, sh := range shs { ctx = sh.TagRPC(ctx, &stats.RPCTagInfo{FullMethodName: method, FailFast: cs.callInfo.failFast}) beginTime = time.Now() begin := &stats.Begin{ Client: true, BeginTime: beginTime, FailFast: cs.callInfo.failFast, IsClientStream: cs.desc.ClientStreams, IsServerStream: cs.desc.ServerStreams, IsTransparentRetryAttempt: isTransparent, } sh.HandleRPC(ctx, begin) } var trInfo *traceInfo if EnableTracing { trInfo = &traceInfo{ tr: newTrace("grpc.Sent."+methodFamily(method), method), firstLine: firstLine{ client: true, }, } if deadline, ok := ctx.Deadline(); ok { trInfo.firstLine.deadline = time.Until(deadline) } trInfo.tr.LazyLog(&trInfo.firstLine, false) ctx = newTraceContext(ctx, trInfo.tr) } if cs.cc.parsedTarget.URL.Scheme == internal.GRPCResolverSchemeExtraMetadata { // Add extra metadata (metadata that will be added by transport) to context // so the balancer can see them. ctx = grpcutil.WithExtraMetadata(ctx, metadata.Pairs( "content-type", grpcutil.ContentType(cs.callHdr.ContentSubtype), )) } return &csAttempt{ ctx: ctx, beginTime: beginTime, cs: cs, dc: cs.cc.dopts.dc, statsHandlers: shs, trInfo: trInfo, }, nil } func (a *csAttempt) getTransport() error { cs := a.cs var err error a.t, a.pickResult, err = cs.cc.getTransport(a.ctx, cs.callInfo.failFast, cs.callHdr.Method) if err != nil { if de, ok := err.(dropError); ok { err = de.error a.drop = true } return err } if a.trInfo != nil { a.trInfo.firstLine.SetRemoteAddr(a.t.RemoteAddr()) } return nil } func (a *csAttempt) newStream() error { cs := a.cs cs.callHdr.PreviousAttempts = cs.numRetries // Merge metadata stored in PickResult, if any, with existing call metadata. // It is safe to overwrite the csAttempt's context here, since all state // maintained in it are local to the attempt. When the attempt has to be // retried, a new instance of csAttempt will be created. if a.pickResult.Metadata != nil { // We currently do not have a function it the metadata package which // merges given metadata with existing metadata in a context. Existing // function `AppendToOutgoingContext()` takes a variadic argument of key // value pairs. // // TODO: Make it possible to retrieve key value pairs from metadata.MD // in a form passable to AppendToOutgoingContext(), or create a version // of AppendToOutgoingContext() that accepts a metadata.MD. md, _ := metadata.FromOutgoingContext(a.ctx) md = metadata.Join(md, a.pickResult.Metadata) a.ctx = metadata.NewOutgoingContext(a.ctx, md) } s, err := a.t.NewStream(a.ctx, cs.callHdr) if err != nil { nse, ok := err.(*transport.NewStreamError) if !ok { // Unexpected. return err } if nse.AllowTransparentRetry { a.allowTransparentRetry = true } // Unwrap and convert error. return toRPCErr(nse.Err) } a.s = s a.ctx = s.Context() a.p = &parser{r: s, recvBufferPool: a.cs.cc.dopts.recvBufferPool} return nil } // clientStream implements a client side Stream. type clientStream struct { callHdr *transport.CallHdr opts []CallOption callInfo *callInfo cc *ClientConn desc *StreamDesc codec baseCodec cp Compressor comp encoding.Compressor cancel context.CancelFunc // cancels all attempts sentLast bool // sent an end stream methodConfig *MethodConfig ctx context.Context // the application's context, wrapped by stats/tracing retryThrottler *retryThrottler // The throttler active when the RPC began. binlogs []binarylog.MethodLogger // serverHeaderBinlogged is a boolean for whether server header has been // logged. Server header will be logged when the first time one of those // happens: stream.Header(), stream.Recv(). // // It's only read and used by Recv() and Header(), so it doesn't need to be // synchronized. serverHeaderBinlogged bool mu sync.Mutex firstAttempt bool // if true, transparent retry is valid numRetries int // exclusive of transparent retry attempt(s) numRetriesSincePushback int // retries since pushback; to reset backoff finished bool // TODO: replace with atomic cmpxchg or sync.Once? // attempt is the active client stream attempt. // The only place where it is written is the newAttemptLocked method and this method never writes nil. // So, attempt can be nil only inside newClientStream function when clientStream is first created. // One of the first things done after clientStream's creation, is to call newAttemptLocked which either // assigns a non nil value to the attempt or returns an error. If an error is returned from newAttemptLocked, // then newClientStream calls finish on the clientStream and returns. So, finish method is the only // place where we need to check if the attempt is nil. attempt *csAttempt // TODO(hedging): hedging will have multiple attempts simultaneously. committed bool // active attempt committed for retry? onCommit func() buffer []func(a *csAttempt) error // operations to replay on retry bufferSize int // current size of buffer } // csAttempt implements a single transport stream attempt within a // clientStream. type csAttempt struct { ctx context.Context cs *clientStream t transport.ClientTransport s *transport.Stream p *parser pickResult balancer.PickResult finished bool dc Decompressor decomp encoding.Compressor decompSet bool mu sync.Mutex // guards trInfo.tr // trInfo may be nil (if EnableTracing is false). // trInfo.tr is set when created (if EnableTracing is true), // and cleared when the finish method is called. trInfo *traceInfo statsHandlers []stats.Handler beginTime time.Time // set for newStream errors that may be transparently retried allowTransparentRetry bool // set for pick errors that are returned as a status drop bool } func (cs *clientStream) commitAttemptLocked() { if !cs.committed && cs.onCommit != nil { cs.onCommit() } cs.committed = true cs.buffer = nil } func (cs *clientStream) commitAttempt() { cs.mu.Lock() cs.commitAttemptLocked() cs.mu.Unlock() } // shouldRetry returns nil if the RPC should be retried; otherwise it returns // the error that should be returned by the operation. If the RPC should be // retried, the bool indicates whether it is being retried transparently. func (a *csAttempt) shouldRetry(err error) (bool, error) { cs := a.cs if cs.finished || cs.committed || a.drop { // RPC is finished or committed or was dropped by the picker; cannot retry. return false, err } if a.s == nil && a.allowTransparentRetry { return true, nil } // Wait for the trailers. unprocessed := false if a.s != nil { <-a.s.Done() unprocessed = a.s.Unprocessed() } if cs.firstAttempt && unprocessed { // First attempt, stream unprocessed: transparently retry. return true, nil } if cs.cc.dopts.disableRetry { return false, err } pushback := 0 hasPushback := false if a.s != nil { if !a.s.TrailersOnly() { return false, err } // TODO(retry): Move down if the spec changes to not check server pushback // before considering this a failure for throttling. sps := a.s.Trailer()["grpc-retry-pushback-ms"] if len(sps) == 1 { var e error if pushback, e = strconv.Atoi(sps[0]); e != nil || pushback < 0 { channelz.Infof(logger, cs.cc.channelz, "Server retry pushback specified to abort (%q).", sps[0]) cs.retryThrottler.throttle() // This counts as a failure for throttling. return false, err } hasPushback = true } else if len(sps) > 1 { channelz.Warningf(logger, cs.cc.channelz, "Server retry pushback specified multiple values (%q); not retrying.", sps) cs.retryThrottler.throttle() // This counts as a failure for throttling. return false, err } } var code codes.Code if a.s != nil { code = a.s.Status().Code() } else { code = status.Code(err) } rp := cs.methodConfig.RetryPolicy if rp == nil || !rp.RetryableStatusCodes[code] { return false, err } // Note: the ordering here is important; we count this as a failure // only if the code matched a retryable code. if cs.retryThrottler.throttle() { return false, err } if cs.numRetries+1 >= rp.MaxAttempts { return false, err } var dur time.Duration if hasPushback { dur = time.Millisecond * time.Duration(pushback) cs.numRetriesSincePushback = 0 } else { fact := math.Pow(rp.BackoffMultiplier, float64(cs.numRetriesSincePushback)) cur := float64(rp.InitialBackoff) * fact if max := float64(rp.MaxBackoff); cur > max { cur = max } dur = time.Duration(rand.Int63n(int64(cur))) cs.numRetriesSincePushback++ } // TODO(dfawley): we could eagerly fail here if dur puts us past the // deadline, but unsure if it is worth doing. t := time.NewTimer(dur) select { case <-t.C: cs.numRetries++ return false, nil case <-cs.ctx.Done(): t.Stop() return false, status.FromContextError(cs.ctx.Err()).Err() } } // Returns nil if a retry was performed and succeeded; error otherwise. func (cs *clientStream) retryLocked(attempt *csAttempt, lastErr error) error { for { attempt.finish(toRPCErr(lastErr)) isTransparent, err := attempt.shouldRetry(lastErr) if err != nil { cs.commitAttemptLocked() return err } cs.firstAttempt = false attempt, err = cs.newAttemptLocked(isTransparent) if err != nil { // Only returns error if the clientconn is closed or the context of // the stream is canceled. return err } // Note that the first op in the replay buffer always sets cs.attempt // if it is able to pick a transport and create a stream. if lastErr = cs.replayBufferLocked(attempt); lastErr == nil { return nil } } } func (cs *clientStream) Context() context.Context { cs.commitAttempt() // No need to lock before using attempt, since we know it is committed and // cannot change. if cs.attempt.s != nil { return cs.attempt.s.Context() } return cs.ctx } func (cs *clientStream) withRetry(op func(a *csAttempt) error, onSuccess func()) error { cs.mu.Lock() for { if cs.committed { cs.mu.Unlock() // toRPCErr is used in case the error from the attempt comes from // NewClientStream, which intentionally doesn't return a status // error to allow for further inspection; all other errors should // already be status errors. return toRPCErr(op(cs.attempt)) } if len(cs.buffer) == 0 { // For the first op, which controls creation of the stream and // assigns cs.attempt, we need to create a new attempt inline // before executing the first op. On subsequent ops, the attempt // is created immediately before replaying the ops. var err error if cs.attempt, err = cs.newAttemptLocked(false /* isTransparent */); err != nil { cs.mu.Unlock() cs.finish(err) return err } } a := cs.attempt cs.mu.Unlock() err := op(a) cs.mu.Lock() if a != cs.attempt { // We started another attempt already. continue } if err == io.EOF { <-a.s.Done() } if err == nil || (err == io.EOF && a.s.Status().Code() == codes.OK) { onSuccess() cs.mu.Unlock() return err } if err := cs.retryLocked(a, err); err != nil { cs.mu.Unlock() return err } } } func (cs *clientStream) Header() (metadata.MD, error) { var m metadata.MD err := cs.withRetry(func(a *csAttempt) error { var err error m, err = a.s.Header() return toRPCErr(err) }, cs.commitAttemptLocked) if m == nil && err == nil { // The stream ended with success. Finish the clientStream. err = io.EOF } if err != nil { cs.finish(err) // Do not return the error. The user should get it by calling Recv(). return nil, nil } if len(cs.binlogs) != 0 && !cs.serverHeaderBinlogged && m != nil { // Only log if binary log is on and header has not been logged, and // there is actually headers to log. logEntry := &binarylog.ServerHeader{ OnClientSide: true, Header: m, PeerAddr: nil, } if peer, ok := peer.FromContext(cs.Context()); ok { logEntry.PeerAddr = peer.Addr } cs.serverHeaderBinlogged = true for _, binlog := range cs.binlogs { binlog.Log(cs.ctx, logEntry) } } return m, nil } func (cs *clientStream) Trailer() metadata.MD { // On RPC failure, we never need to retry, because usage requires that // RecvMsg() returned a non-nil error before calling this function is valid. // We would have retried earlier if necessary. // // Commit the attempt anyway, just in case users are not following those // directions -- it will prevent races and should not meaningfully impact // performance. cs.commitAttempt() if cs.attempt.s == nil { return nil } return cs.attempt.s.Trailer() } func (cs *clientStream) replayBufferLocked(attempt *csAttempt) error { for _, f := range cs.buffer { if err := f(attempt); err != nil { return err } } return nil } func (cs *clientStream) bufferForRetryLocked(sz int, op func(a *csAttempt) error) { // Note: we still will buffer if retry is disabled (for transparent retries). if cs.committed { return } cs.bufferSize += sz if cs.bufferSize > cs.callInfo.maxRetryRPCBufferSize { cs.commitAttemptLocked() return } cs.buffer = append(cs.buffer, op) } func (cs *clientStream) SendMsg(m any) (err error) { defer func() { if err != nil && err != io.EOF { // Call finish on the client stream for errors generated by this SendMsg // call, as these indicate problems created by this client. (Transport // errors are converted to an io.EOF error in csAttempt.sendMsg; the real // error will be returned from RecvMsg eventually in that case, or be // retried.) cs.finish(err) } }() if cs.sentLast { return status.Errorf(codes.Internal, "SendMsg called after CloseSend") } if !cs.desc.ClientStreams { cs.sentLast = true } // load hdr, payload, data hdr, payload, data, err := prepareMsg(m, cs.codec, cs.cp, cs.comp) if err != nil { return err } // TODO(dfawley): should we be checking len(data) instead? if len(payload) > *cs.callInfo.maxSendMessageSize { return status.Errorf(codes.ResourceExhausted, "trying to send message larger than max (%d vs. %d)", len(payload), *cs.callInfo.maxSendMessageSize) } op := func(a *csAttempt) error { return a.sendMsg(m, hdr, payload, data) } err = cs.withRetry(op, func() { cs.bufferForRetryLocked(len(hdr)+len(payload), op) }) if len(cs.binlogs) != 0 && err == nil { cm := &binarylog.ClientMessage{ OnClientSide: true, Message: data, } for _, binlog := range cs.binlogs { binlog.Log(cs.ctx, cm) } } return err } func (cs *clientStream) RecvMsg(m any) error { if len(cs.binlogs) != 0 && !cs.serverHeaderBinlogged { // Call Header() to binary log header if it's not already logged. cs.Header() } var recvInfo *payloadInfo if len(cs.binlogs) != 0 { recvInfo = &payloadInfo{} } err := cs.withRetry(func(a *csAttempt) error { return a.recvMsg(m, recvInfo) }, cs.commitAttemptLocked) if len(cs.binlogs) != 0 && err == nil { sm := &binarylog.ServerMessage{ OnClientSide: true, Message: recvInfo.uncompressedBytes, } for _, binlog := range cs.binlogs { binlog.Log(cs.ctx, sm) } } if err != nil || !cs.desc.ServerStreams { // err != nil or non-server-streaming indicates end of stream. cs.finish(err) } return err } func (cs *clientStream) CloseSend() error { if cs.sentLast { // TODO: return an error and finish the stream instead, due to API misuse? return nil } cs.sentLast = true op := func(a *csAttempt) error { a.t.Write(a.s, nil, nil, &transport.Options{Last: true}) // Always return nil; io.EOF is the only error that might make sense // instead, but there is no need to signal the client to call RecvMsg // as the only use left for the stream after CloseSend is to call // RecvMsg. This also matches historical behavior. return nil } cs.withRetry(op, func() { cs.bufferForRetryLocked(0, op) }) if len(cs.binlogs) != 0 { chc := &binarylog.ClientHalfClose{ OnClientSide: true, } for _, binlog := range cs.binlogs { binlog.Log(cs.ctx, chc) } } // We never returned an error here for reasons. return nil } func (cs *clientStream) finish(err error) { if err == io.EOF { // Ending a stream with EOF indicates a success. err = nil } cs.mu.Lock() if cs.finished { cs.mu.Unlock() return } cs.finished = true for _, onFinish := range cs.callInfo.onFinish { onFinish(err) } cs.commitAttemptLocked() if cs.attempt != nil { cs.attempt.finish(err) // after functions all rely upon having a stream. if cs.attempt.s != nil { for _, o := range cs.opts { o.after(cs.callInfo, cs.attempt) } } } cs.mu.Unlock() // Only one of cancel or trailer needs to be logged. if len(cs.binlogs) != 0 { switch err { case errContextCanceled, errContextDeadline, ErrClientConnClosing: c := &binarylog.Cancel{ OnClientSide: true, } for _, binlog := range cs.binlogs { binlog.Log(cs.ctx, c) } default: logEntry := &binarylog.ServerTrailer{ OnClientSide: true, Trailer: cs.Trailer(), Err: err, } if peer, ok := peer.FromContext(cs.Context()); ok { logEntry.PeerAddr = peer.Addr } for _, binlog := range cs.binlogs { binlog.Log(cs.ctx, logEntry) } } } if err == nil { cs.retryThrottler.successfulRPC() } if channelz.IsOn() { if err != nil { cs.cc.incrCallsFailed() } else { cs.cc.incrCallsSucceeded() } } cs.cancel() } func (a *csAttempt) sendMsg(m any, hdr, payld, data []byte) error { cs := a.cs if a.trInfo != nil { a.mu.Lock() if a.trInfo.tr != nil { a.trInfo.tr.LazyLog(&payload{sent: true, msg: m}, true) } a.mu.Unlock() } if err := a.t.Write(a.s, hdr, payld, &transport.Options{Last: !cs.desc.ClientStreams}); err != nil { if !cs.desc.ClientStreams { // For non-client-streaming RPCs, we return nil instead of EOF on error // because the generated code requires it. finish is not called; RecvMsg() // will call it with the stream's status independently. return nil } return io.EOF } for _, sh := range a.statsHandlers { sh.HandleRPC(a.ctx, outPayload(true, m, data, payld, time.Now())) } if channelz.IsOn() { a.t.IncrMsgSent() } return nil } func (a *csAttempt) recvMsg(m any, payInfo *payloadInfo) (err error) { cs := a.cs if len(a.statsHandlers) != 0 && payInfo == nil { payInfo = &payloadInfo{} } if !a.decompSet { // Block until we receive headers containing received message encoding. if ct := a.s.RecvCompress(); ct != "" && ct != encoding.Identity { if a.dc == nil || a.dc.Type() != ct { // No configured decompressor, or it does not match the incoming // message encoding; attempt to find a registered compressor that does. a.dc = nil a.decomp = encoding.GetCompressor(ct) } } else { // No compression is used; disable our decompressor. a.dc = nil } // Only initialize this state once per stream. a.decompSet = true } err = recv(a.p, cs.codec, a.s, a.dc, m, *cs.callInfo.maxReceiveMessageSize, payInfo, a.decomp) if err != nil { if err == io.EOF { if statusErr := a.s.Status().Err(); statusErr != nil { return statusErr } return io.EOF // indicates successful end of stream. } return toRPCErr(err) } if a.trInfo != nil { a.mu.Lock() if a.trInfo.tr != nil { a.trInfo.tr.LazyLog(&payload{sent: false, msg: m}, true) } a.mu.Unlock() } for _, sh := range a.statsHandlers { sh.HandleRPC(a.ctx, &stats.InPayload{ Client: true, RecvTime: time.Now(), Payload: m, // TODO truncate large payload. Data: payInfo.uncompressedBytes, WireLength: payInfo.compressedLength + headerLen, CompressedLength: payInfo.compressedLength, Length: len(payInfo.uncompressedBytes), }) } if channelz.IsOn() { a.t.IncrMsgRecv() } if cs.desc.ServerStreams { // Subsequent messages should be received by subsequent RecvMsg calls. return nil } // Special handling for non-server-stream rpcs. // This recv expects EOF or errors, so we don't collect inPayload. err = recv(a.p, cs.codec, a.s, a.dc, m, *cs.callInfo.maxReceiveMessageSize, nil, a.decomp) if err == nil { return toRPCErr(errors.New("grpc: client streaming protocol violation: get <nil>, want <EOF>")) } if err == io.EOF { return a.s.Status().Err() // non-server streaming Recv returns nil on success } return toRPCErr(err) } func (a *csAttempt) finish(err error) { a.mu.Lock() if a.finished { a.mu.Unlock() return } a.finished = true if err == io.EOF { // Ending a stream with EOF indicates a success. err = nil } var tr metadata.MD if a.s != nil { a.t.CloseStream(a.s, err) tr = a.s.Trailer() } if a.pickResult.Done != nil { br := false if a.s != nil { br = a.s.BytesReceived() } a.pickResult.Done(balancer.DoneInfo{ Err: err, Trailer: tr, BytesSent: a.s != nil, BytesReceived: br, ServerLoad: balancerload.Parse(tr), }) } for _, sh := range a.statsHandlers { end := &stats.End{ Client: true, BeginTime: a.beginTime, EndTime: time.Now(), Trailer: tr, Error: err, } sh.HandleRPC(a.ctx, end) } if a.trInfo != nil && a.trInfo.tr != nil { if err == nil { a.trInfo.tr.LazyPrintf("RPC: [OK]") } else { a.trInfo.tr.LazyPrintf("RPC: [%v]", err) a.trInfo.tr.SetError() } a.trInfo.tr.Finish() a.trInfo.tr = nil } a.mu.Unlock() } // newClientStream creates a ClientStream with the specified transport, on the // given addrConn. // // It's expected that the given transport is either the same one in addrConn, or // is already closed. To avoid race, transport is specified separately, instead // of using ac.transpot. // // Main difference between this and ClientConn.NewStream: // - no retry // - no service config (or wait for service config) // - no tracing or stats func newNonRetryClientStream(ctx context.Context, desc *StreamDesc, method string, t transport.ClientTransport, ac *addrConn, opts ...CallOption) (_ ClientStream, err error) { if t == nil { // TODO: return RPC error here? return nil, errors.New("transport provided is nil") } // defaultCallInfo contains unnecessary info(i.e. failfast, maxRetryRPCBufferSize), so we just initialize an empty struct. c := &callInfo{} // Possible context leak: // The cancel function for the child context we create will only be called // when RecvMsg returns a non-nil error, if the ClientConn is closed, or if // an error is generated by SendMsg. // https://github.com/grpc/grpc-go/issues/1818. ctx, cancel := context.WithCancel(ctx) defer func() { if err != nil { cancel() } }() for _, o := range opts { if err := o.before(c); err != nil { return nil, toRPCErr(err) } } c.maxReceiveMessageSize = getMaxSize(nil, c.maxReceiveMessageSize, defaultClientMaxReceiveMessageSize) c.maxSendMessageSize = getMaxSize(nil, c.maxSendMessageSize, defaultServerMaxSendMessageSize) if err := setCallInfoCodec(c); err != nil { return nil, err } callHdr := &transport.CallHdr{ Host: ac.cc.authority, Method: method, ContentSubtype: c.contentSubtype, } // Set our outgoing compression according to the UseCompressor CallOption, if // set. In that case, also find the compressor from the encoding package. // Otherwise, use the compressor configured by the WithCompressor DialOption, // if set. var cp Compressor var comp encoding.Compressor if ct := c.compressorType; ct != "" { callHdr.SendCompress = ct if ct != encoding.Identity { comp = encoding.GetCompressor(ct) if comp == nil { return nil, status.Errorf(codes.Internal, "grpc: Compressor is not installed for requested grpc-encoding %q", ct) } } } else if ac.cc.dopts.cp != nil { callHdr.SendCompress = ac.cc.dopts.cp.Type() cp = ac.cc.dopts.cp } if c.creds != nil { callHdr.Creds = c.creds } // Use a special addrConnStream to avoid retry. as := &addrConnStream{ callHdr: callHdr, ac: ac, ctx: ctx, cancel: cancel, opts: opts, callInfo: c, desc: desc, codec: c.codec, cp: cp, comp: comp, t: t, } s, err := as.t.NewStream(as.ctx, as.callHdr) if err != nil { err = toRPCErr(err) return nil, err } as.s = s as.p = &parser{r: s, recvBufferPool: ac.dopts.recvBufferPool} ac.incrCallsStarted() if desc != unaryStreamDesc { // Listen on stream context to cleanup when the stream context is // canceled. Also listen for the addrConn's context in case the // addrConn is closed or reconnects to a different address. In all // other cases, an error should already be injected into the recv // buffer by the transport, which the client will eventually receive, // and then we will cancel the stream's context in // addrConnStream.finish. go func() { ac.mu.Lock() acCtx := ac.ctx ac.mu.Unlock() select { case <-acCtx.Done(): as.finish(status.Error(codes.Canceled, "grpc: the SubConn is closing")) case <-ctx.Done(): as.finish(toRPCErr(ctx.Err())) } }() } return as, nil } type addrConnStream struct { s *transport.Stream ac *addrConn callHdr *transport.CallHdr cancel context.CancelFunc opts []CallOption callInfo *callInfo t transport.ClientTransport ctx context.Context sentLast bool desc *StreamDesc codec baseCodec cp Compressor comp encoding.Compressor decompSet bool dc Decompressor decomp encoding.Compressor p *parser mu sync.Mutex finished bool } func (as *addrConnStream) Header() (metadata.MD, error) { m, err := as.s.Header() if err != nil { as.finish(toRPCErr(err)) } return m, err } func (as *addrConnStream) Trailer() metadata.MD { return as.s.Trailer() } func (as *addrConnStream) CloseSend() error { if as.sentLast { // TODO: return an error and finish the stream instead, due to API misuse? return nil } as.sentLast = true as.t.Write(as.s, nil, nil, &transport.Options{Last: true}) // Always return nil; io.EOF is the only error that might make sense // instead, but there is no need to signal the client to call RecvMsg // as the only use left for the stream after CloseSend is to call // RecvMsg. This also matches historical behavior. return nil } func (as *addrConnStream) Context() context.Context { return as.s.Context() } func (as *addrConnStream) SendMsg(m any) (err error) { defer func() { if err != nil && err != io.EOF { // Call finish on the client stream for errors generated by this SendMsg // call, as these indicate problems created by this client. (Transport // errors are converted to an io.EOF error in csAttempt.sendMsg; the real // error will be returned from RecvMsg eventually in that case, or be // retried.) as.finish(err) } }() if as.sentLast { return status.Errorf(codes.Internal, "SendMsg called after CloseSend") } if !as.desc.ClientStreams { as.sentLast = true } // load hdr, payload, data hdr, payld, _, err := prepareMsg(m, as.codec, as.cp, as.comp) if err != nil { return err } // TODO(dfawley): should we be checking len(data) instead? if len(payld) > *as.callInfo.maxSendMessageSize { return status.Errorf(codes.ResourceExhausted, "trying to send message larger than max (%d vs. %d)", len(payld), *as.callInfo.maxSendMessageSize) } if err := as.t.Write(as.s, hdr, payld, &transport.Options{Last: !as.desc.ClientStreams}); err != nil { if !as.desc.ClientStreams { // For non-client-streaming RPCs, we return nil instead of EOF on error // because the generated code requires it. finish is not called; RecvMsg() // will call it with the stream's status independently. return nil } return io.EOF } if channelz.IsOn() { as.t.IncrMsgSent() } return nil } func (as *addrConnStream) RecvMsg(m any) (err error) { defer func() { if err != nil || !as.desc.ServerStreams { // err != nil or non-server-streaming indicates end of stream. as.finish(err) } }() if !as.decompSet { // Block until we receive headers containing received message encoding. if ct := as.s.RecvCompress(); ct != "" && ct != encoding.Identity { if as.dc == nil || as.dc.Type() != ct { // No configured decompressor, or it does not match the incoming // message encoding; attempt to find a registered compressor that does. as.dc = nil as.decomp = encoding.GetCompressor(ct) } } else { // No compression is used; disable our decompressor. as.dc = nil } // Only initialize this state once per stream. as.decompSet = true } err = recv(as.p, as.codec, as.s, as.dc, m, *as.callInfo.maxReceiveMessageSize, nil, as.decomp) if err != nil { if err == io.EOF { if statusErr := as.s.Status().Err(); statusErr != nil { return statusErr } return io.EOF // indicates successful end of stream. } return toRPCErr(err) } if channelz.IsOn() { as.t.IncrMsgRecv() } if as.desc.ServerStreams { // Subsequent messages should be received by subsequent RecvMsg calls. return nil } // Special handling for non-server-stream rpcs. // This recv expects EOF or errors, so we don't collect inPayload. err = recv(as.p, as.codec, as.s, as.dc, m, *as.callInfo.maxReceiveMessageSize, nil, as.decomp) if err == nil { return toRPCErr(errors.New("grpc: client streaming protocol violation: get <nil>, want <EOF>")) } if err == io.EOF { return as.s.Status().Err() // non-server streaming Recv returns nil on success } return toRPCErr(err) } func (as *addrConnStream) finish(err error) { as.mu.Lock() if as.finished { as.mu.Unlock() return } as.finished = true if err == io.EOF { // Ending a stream with EOF indicates a success. err = nil } if as.s != nil { as.t.CloseStream(as.s, err) } if err != nil { as.ac.incrCallsFailed() } else { as.ac.incrCallsSucceeded() } as.cancel() as.mu.Unlock() } // ServerStream defines the server-side behavior of a streaming RPC. // // Errors returned from ServerStream methods are compatible with the status // package. However, the status code will often not match the RPC status as // seen by the client application, and therefore, should not be relied upon for // this purpose. type ServerStream interface { // SetHeader sets the header metadata. It may be called multiple times. // When call multiple times, all the provided metadata will be merged. // All the metadata will be sent out when one of the following happens: // - ServerStream.SendHeader() is called; // - The first response is sent out; // - An RPC status is sent out (error or success). SetHeader(metadata.MD) error // SendHeader sends the header metadata. // The provided md and headers set by SetHeader() will be sent. // It fails if called multiple times. SendHeader(metadata.MD) error // SetTrailer sets the trailer metadata which will be sent with the RPC status. // When called more than once, all the provided metadata will be merged. SetTrailer(metadata.MD) // Context returns the context for this stream. Context() context.Context // SendMsg sends a message. On error, SendMsg aborts the stream and the // error is returned directly. // // SendMsg blocks until: // - There is sufficient flow control to schedule m with the transport, or // - The stream is done, or // - The stream breaks. // // SendMsg does not wait until the message is received by the client. An // untimely stream closure may result in lost messages. // // It is safe to have a goroutine calling SendMsg and another goroutine // calling RecvMsg on the same stream at the same time, but it is not safe // to call SendMsg on the same stream in different goroutines. // // It is not safe to modify the message after calling SendMsg. Tracing // libraries and stats handlers may use the message lazily. SendMsg(m any) error // RecvMsg blocks until it receives a message into m or the stream is // done. It returns io.EOF when the client has performed a CloseSend. On // any non-EOF error, the stream is aborted and the error contains the // RPC status. // // It is safe to have a goroutine calling SendMsg and another goroutine // calling RecvMsg on the same stream at the same time, but it is not // safe to call RecvMsg on the same stream in different goroutines. RecvMsg(m any) error } // serverStream implements a server side Stream. type serverStream struct { ctx context.Context t transport.ServerTransport s *transport.Stream p *parser codec baseCodec cp Compressor dc Decompressor comp encoding.Compressor decomp encoding.Compressor sendCompressorName string maxReceiveMessageSize int maxSendMessageSize int trInfo *traceInfo statsHandler []stats.Handler binlogs []binarylog.MethodLogger // serverHeaderBinlogged indicates whether server header has been logged. It // will happen when one of the following two happens: stream.SendHeader(), // stream.Send(). // // It's only checked in send and sendHeader, doesn't need to be // synchronized. serverHeaderBinlogged bool mu sync.Mutex // protects trInfo.tr after the service handler runs. } func (ss *serverStream) Context() context.Context { return ss.ctx } func (ss *serverStream) SetHeader(md metadata.MD) error { if md.Len() == 0 { return nil } err := imetadata.Validate(md) if err != nil { return status.Error(codes.Internal, err.Error()) } return ss.s.SetHeader(md) } func (ss *serverStream) SendHeader(md metadata.MD) error { err := imetadata.Validate(md) if err != nil { return status.Error(codes.Internal, err.Error()) } err = ss.t.WriteHeader(ss.s, md) if len(ss.binlogs) != 0 && !ss.serverHeaderBinlogged { h, _ := ss.s.Header() sh := &binarylog.ServerHeader{ Header: h, } ss.serverHeaderBinlogged = true for _, binlog := range ss.binlogs { binlog.Log(ss.ctx, sh) } } return err } func (ss *serverStream) SetTrailer(md metadata.MD) { if md.Len() == 0 { return } if err := imetadata.Validate(md); err != nil { logger.Errorf("stream: failed to validate md when setting trailer, err: %v", err) } ss.s.SetTrailer(md) } func (ss *serverStream) SendMsg(m any) (err error) { defer func() { if ss.trInfo != nil { ss.mu.Lock() if ss.trInfo.tr != nil { if err == nil { ss.trInfo.tr.LazyLog(&payload{sent: true, msg: m}, true) } else { ss.trInfo.tr.LazyLog(&fmtStringer{"%v", []any{err}}, true) ss.trInfo.tr.SetError() } } ss.mu.Unlock() } if err != nil && err != io.EOF { st, _ := status.FromError(toRPCErr(err)) ss.t.WriteStatus(ss.s, st) // Non-user specified status was sent out. This should be an error // case (as a server side Cancel maybe). // // This is not handled specifically now. User will return a final // status from the service handler, we will log that error instead. // This behavior is similar to an interceptor. } if channelz.IsOn() && err == nil { ss.t.IncrMsgSent() } }() // Server handler could have set new compressor by calling SetSendCompressor. // In case it is set, we need to use it for compressing outbound message. if sendCompressorsName := ss.s.SendCompress(); sendCompressorsName != ss.sendCompressorName { ss.comp = encoding.GetCompressor(sendCompressorsName) ss.sendCompressorName = sendCompressorsName } // load hdr, payload, data hdr, payload, data, err := prepareMsg(m, ss.codec, ss.cp, ss.comp) if err != nil { return err } // TODO(dfawley): should we be checking len(data) instead? if len(payload) > ss.maxSendMessageSize { return status.Errorf(codes.ResourceExhausted, "trying to send message larger than max (%d vs. %d)", len(payload), ss.maxSendMessageSize) } if err := ss.t.Write(ss.s, hdr, payload, &transport.Options{Last: false}); err != nil { return toRPCErr(err) } if len(ss.binlogs) != 0 { if !ss.serverHeaderBinlogged { h, _ := ss.s.Header() sh := &binarylog.ServerHeader{ Header: h, } ss.serverHeaderBinlogged = true for _, binlog := range ss.binlogs { binlog.Log(ss.ctx, sh) } } sm := &binarylog.ServerMessage{ Message: data, } for _, binlog := range ss.binlogs { binlog.Log(ss.ctx, sm) } } if len(ss.statsHandler) != 0 { for _, sh := range ss.statsHandler { sh.HandleRPC(ss.s.Context(), outPayload(false, m, data, payload, time.Now())) } } return nil } func (ss *serverStream) RecvMsg(m any) (err error) { defer func() { if ss.trInfo != nil { ss.mu.Lock() if ss.trInfo.tr != nil { if err == nil { ss.trInfo.tr.LazyLog(&payload{sent: false, msg: m}, true) } else if err != io.EOF { ss.trInfo.tr.LazyLog(&fmtStringer{"%v", []any{err}}, true) ss.trInfo.tr.SetError() } } ss.mu.Unlock() } if err != nil && err != io.EOF { st, _ := status.FromError(toRPCErr(err)) ss.t.WriteStatus(ss.s, st) // Non-user specified status was sent out. This should be an error // case (as a server side Cancel maybe). // // This is not handled specifically now. User will return a final // status from the service handler, we will log that error instead. // This behavior is similar to an interceptor. } if channelz.IsOn() && err == nil { ss.t.IncrMsgRecv() } }() var payInfo *payloadInfo if len(ss.statsHandler) != 0 || len(ss.binlogs) != 0 { payInfo = &payloadInfo{} } if err := recv(ss.p, ss.codec, ss.s, ss.dc, m, ss.maxReceiveMessageSize, payInfo, ss.decomp); err != nil { if err == io.EOF { if len(ss.binlogs) != 0 { chc := &binarylog.ClientHalfClose{} for _, binlog := range ss.binlogs { binlog.Log(ss.ctx, chc) } } return err } if err == io.ErrUnexpectedEOF { err = status.Errorf(codes.Internal, io.ErrUnexpectedEOF.Error()) } return toRPCErr(err) } if len(ss.statsHandler) != 0 { for _, sh := range ss.statsHandler { sh.HandleRPC(ss.s.Context(), &stats.InPayload{ RecvTime: time.Now(), Payload: m, // TODO truncate large payload. Data: payInfo.uncompressedBytes, Length: len(payInfo.uncompressedBytes), WireLength: payInfo.compressedLength + headerLen, CompressedLength: payInfo.compressedLength, }) } } if len(ss.binlogs) != 0 { cm := &binarylog.ClientMessage{ Message: payInfo.uncompressedBytes, } for _, binlog := range ss.binlogs { binlog.Log(ss.ctx, cm) } } return nil } // MethodFromServerStream returns the method string for the input stream. // The returned string is in the format of "/service/method". func MethodFromServerStream(stream ServerStream) (string, bool) { return Method(stream.Context()) } // prepareMsg returns the hdr, payload and data // using the compressors passed or using the // passed preparedmsg func prepareMsg(m any, codec baseCodec, cp Compressor, comp encoding.Compressor) (hdr, payload, data []byte, err error) { if preparedMsg, ok := m.(*PreparedMsg); ok { return preparedMsg.hdr, preparedMsg.payload, preparedMsg.encodedData, nil } // The input interface is not a prepared msg. // Marshal and Compress the data at this point data, err = encode(codec, m) if err != nil { return nil, nil, nil, err } compData, err := compress(data, cp, comp) if err != nil { return nil, nil, nil, err } hdr, payload = msgHeader(data, compData) return hdr, payload, data, nil }