ceph-csi/vendor/google.golang.org/grpc/grpclb.go
Serguei Bezverkhi 7b24313bd6 vendor files
2018-01-10 13:42:26 -05:00

343 lines
10 KiB
Go

/*
*
* Copyright 2016 gRPC authors.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
*/
package grpc
import (
"strconv"
"strings"
"sync"
"time"
"golang.org/x/net/context"
"google.golang.org/grpc/balancer"
"google.golang.org/grpc/connectivity"
lbpb "google.golang.org/grpc/grpclb/grpc_lb_v1/messages"
"google.golang.org/grpc/grpclog"
"google.golang.org/grpc/resolver"
)
const (
lbTokeyKey = "lb-token"
defaultFallbackTimeout = 10 * time.Second
grpclbName = "grpclb"
)
func convertDuration(d *lbpb.Duration) time.Duration {
if d == nil {
return 0
}
return time.Duration(d.Seconds)*time.Second + time.Duration(d.Nanos)*time.Nanosecond
}
// Client API for LoadBalancer service.
// Mostly copied from generated pb.go file.
// To avoid circular dependency.
type loadBalancerClient struct {
cc *ClientConn
}
func (c *loadBalancerClient) BalanceLoad(ctx context.Context, opts ...CallOption) (*balanceLoadClientStream, error) {
desc := &StreamDesc{
StreamName: "BalanceLoad",
ServerStreams: true,
ClientStreams: true,
}
stream, err := NewClientStream(ctx, desc, c.cc, "/grpc.lb.v1.LoadBalancer/BalanceLoad", opts...)
if err != nil {
return nil, err
}
x := &balanceLoadClientStream{stream}
return x, nil
}
type balanceLoadClientStream struct {
ClientStream
}
func (x *balanceLoadClientStream) Send(m *lbpb.LoadBalanceRequest) error {
return x.ClientStream.SendMsg(m)
}
func (x *balanceLoadClientStream) Recv() (*lbpb.LoadBalanceResponse, error) {
m := new(lbpb.LoadBalanceResponse)
if err := x.ClientStream.RecvMsg(m); err != nil {
return nil, err
}
return m, nil
}
func init() {
balancer.Register(newLBBuilder())
}
// newLBBuilder creates a builder for grpclb.
func newLBBuilder() balancer.Builder {
return NewLBBuilderWithFallbackTimeout(defaultFallbackTimeout)
}
// NewLBBuilderWithFallbackTimeout creates a grpclb builder with the given
// fallbackTimeout. If no response is received from the remote balancer within
// fallbackTimeout, the backend addresses from the resolved address list will be
// used.
//
// Only call this function when a non-default fallback timeout is needed.
func NewLBBuilderWithFallbackTimeout(fallbackTimeout time.Duration) balancer.Builder {
return &lbBuilder{
fallbackTimeout: fallbackTimeout,
}
}
type lbBuilder struct {
fallbackTimeout time.Duration
}
func (b *lbBuilder) Name() string {
return grpclbName
}
func (b *lbBuilder) Build(cc balancer.ClientConn, opt balancer.BuildOptions) balancer.Balancer {
// This generates a manual resolver builder with a random scheme. This
// scheme will be used to dial to remote LB, so we can send filtered address
// updates to remote LB ClientConn using this manual resolver.
scheme := "grpclb_internal_" + strconv.FormatInt(time.Now().UnixNano(), 36)
r := &lbManualResolver{scheme: scheme, ccb: cc}
var target string
targetSplitted := strings.Split(cc.Target(), ":///")
if len(targetSplitted) < 2 {
target = cc.Target()
} else {
target = targetSplitted[1]
}
lb := &lbBalancer{
cc: cc,
target: target,
opt: opt,
fallbackTimeout: b.fallbackTimeout,
doneCh: make(chan struct{}),
manualResolver: r,
csEvltr: &connectivityStateEvaluator{},
subConns: make(map[resolver.Address]balancer.SubConn),
scStates: make(map[balancer.SubConn]connectivity.State),
picker: &errPicker{err: balancer.ErrNoSubConnAvailable},
clientStats: &rpcStats{},
}
return lb
}
type lbBalancer struct {
cc balancer.ClientConn
target string
opt balancer.BuildOptions
fallbackTimeout time.Duration
doneCh chan struct{}
// manualResolver is used in the remote LB ClientConn inside grpclb. When
// resolved address updates are received by grpclb, filtered updates will be
// send to remote LB ClientConn through this resolver.
manualResolver *lbManualResolver
// The ClientConn to talk to the remote balancer.
ccRemoteLB *ClientConn
// Support client side load reporting. Each picker gets a reference to this,
// and will update its content.
clientStats *rpcStats
mu sync.Mutex // guards everything following.
// The full server list including drops, used to check if the newly received
// serverList contains anything new. Each generate picker will also have
// reference to this list to do the first layer pick.
fullServerList []*lbpb.Server
// All backends addresses, with metadata set to nil. This list contains all
// backend addresses in the same order and with the same duplicates as in
// serverlist. When generating picker, a SubConn slice with the same order
// but with only READY SCs will be gerenated.
backendAddrs []resolver.Address
// Roundrobin functionalities.
csEvltr *connectivityStateEvaluator
state connectivity.State
subConns map[resolver.Address]balancer.SubConn // Used to new/remove SubConn.
scStates map[balancer.SubConn]connectivity.State // Used to filter READY SubConns.
picker balancer.Picker
// Support fallback to resolved backend addresses if there's no response
// from remote balancer within fallbackTimeout.
fallbackTimerExpired bool
serverListReceived bool
// resolvedBackendAddrs is resolvedAddrs minus remote balancers. It's set
// when resolved address updates are received, and read in the goroutine
// handling fallback.
resolvedBackendAddrs []resolver.Address
}
// regeneratePicker takes a snapshot of the balancer, and generates a picker from
// it. The picker
// - always returns ErrTransientFailure if the balancer is in TransientFailure,
// - does two layer roundrobin pick otherwise.
// Caller must hold lb.mu.
func (lb *lbBalancer) regeneratePicker() {
if lb.state == connectivity.TransientFailure {
lb.picker = &errPicker{err: balancer.ErrTransientFailure}
return
}
var readySCs []balancer.SubConn
for _, a := range lb.backendAddrs {
if sc, ok := lb.subConns[a]; ok {
if st, ok := lb.scStates[sc]; ok && st == connectivity.Ready {
readySCs = append(readySCs, sc)
}
}
}
if len(lb.fullServerList) <= 0 {
if len(readySCs) <= 0 {
lb.picker = &errPicker{err: balancer.ErrNoSubConnAvailable}
return
}
lb.picker = &rrPicker{subConns: readySCs}
return
}
lb.picker = &lbPicker{
serverList: lb.fullServerList,
subConns: readySCs,
stats: lb.clientStats,
}
return
}
func (lb *lbBalancer) HandleSubConnStateChange(sc balancer.SubConn, s connectivity.State) {
grpclog.Infof("lbBalancer: handle SubConn state change: %p, %v", sc, s)
lb.mu.Lock()
defer lb.mu.Unlock()
oldS, ok := lb.scStates[sc]
if !ok {
grpclog.Infof("lbBalancer: got state changes for an unknown SubConn: %p, %v", sc, s)
return
}
lb.scStates[sc] = s
switch s {
case connectivity.Idle:
sc.Connect()
case connectivity.Shutdown:
// When an address was removed by resolver, b called RemoveSubConn but
// kept the sc's state in scStates. Remove state for this sc here.
delete(lb.scStates, sc)
}
oldAggrState := lb.state
lb.state = lb.csEvltr.recordTransition(oldS, s)
// Regenerate picker when one of the following happens:
// - this sc became ready from not-ready
// - this sc became not-ready from ready
// - the aggregated state of balancer became TransientFailure from non-TransientFailure
// - the aggregated state of balancer became non-TransientFailure from TransientFailure
if (oldS == connectivity.Ready) != (s == connectivity.Ready) ||
(lb.state == connectivity.TransientFailure) != (oldAggrState == connectivity.TransientFailure) {
lb.regeneratePicker()
}
lb.cc.UpdateBalancerState(lb.state, lb.picker)
return
}
// fallbackToBackendsAfter blocks for fallbackTimeout and falls back to use
// resolved backends (backends received from resolver, not from remote balancer)
// if no connection to remote balancers was successful.
func (lb *lbBalancer) fallbackToBackendsAfter(fallbackTimeout time.Duration) {
timer := time.NewTimer(fallbackTimeout)
defer timer.Stop()
select {
case <-timer.C:
case <-lb.doneCh:
return
}
lb.mu.Lock()
if lb.serverListReceived {
lb.mu.Unlock()
return
}
lb.fallbackTimerExpired = true
lb.refreshSubConns(lb.resolvedBackendAddrs)
lb.mu.Unlock()
}
// HandleResolvedAddrs sends the updated remoteLB addresses to remoteLB
// clientConn. The remoteLB clientConn will handle creating/removing remoteLB
// connections.
func (lb *lbBalancer) HandleResolvedAddrs(addrs []resolver.Address, err error) {
grpclog.Infof("lbBalancer: handleResolvedResult: %+v", addrs)
if len(addrs) <= 0 {
return
}
var remoteBalancerAddrs, backendAddrs []resolver.Address
for _, a := range addrs {
if a.Type == resolver.GRPCLB {
remoteBalancerAddrs = append(remoteBalancerAddrs, a)
} else {
backendAddrs = append(backendAddrs, a)
}
}
if lb.ccRemoteLB == nil {
if len(remoteBalancerAddrs) <= 0 {
grpclog.Errorf("grpclb: no remote balancer address is available, should never happen")
return
}
// First time receiving resolved addresses, create a cc to remote
// balancers.
lb.dialRemoteLB(remoteBalancerAddrs[0].ServerName)
// Start the fallback goroutine.
go lb.fallbackToBackendsAfter(lb.fallbackTimeout)
}
// cc to remote balancers uses lb.manualResolver. Send the updated remote
// balancer addresses to it through manualResolver.
lb.manualResolver.NewAddress(remoteBalancerAddrs)
lb.mu.Lock()
lb.resolvedBackendAddrs = backendAddrs
// If serverListReceived is true, connection to remote balancer was
// successful and there's no need to do fallback anymore.
// If fallbackTimerExpired is false, fallback hasn't happened yet.
if !lb.serverListReceived && lb.fallbackTimerExpired {
// This means we received a new list of resolved backends, and we are
// still in fallback mode. Need to update the list of backends we are
// using to the new list of backends.
lb.refreshSubConns(lb.resolvedBackendAddrs)
}
lb.mu.Unlock()
}
func (lb *lbBalancer) Close() {
select {
case <-lb.doneCh:
return
default:
}
close(lb.doneCh)
if lb.ccRemoteLB != nil {
lb.ccRemoteLB.Close()
}
}