ceph-csi/vendor/github.com/aws/aws-sdk-go-v2/service/sts/api_op_GetSessionToken.go

// Code generated by smithy-go-codegen DO NOT EDIT.

package sts

import (
	"context"
	"fmt"
	awsmiddleware "github.com/aws/aws-sdk-go-v2/aws/middleware"
	"github.com/aws/aws-sdk-go-v2/service/sts/types"
	"github.com/aws/smithy-go/middleware"
	smithyhttp "github.com/aws/smithy-go/transport/http"
)

// Returns a set of temporary credentials for an Amazon Web Services account or
// IAM user. The credentials consist of an access key ID, a secret access key, and
// a security token. Typically, you use GetSessionToken if you want to use MFA to
// protect programmatic calls to specific Amazon Web Services API operations like
// Amazon EC2 StopInstances .
//
// MFA-enabled IAM users must call GetSessionToken and submit an MFA code that is
// associated with their MFA device. Using the temporary security credentials that
// the call returns, IAM users can then make programmatic calls to API operations
// that require MFA authentication. An incorrect MFA code causes the API to return
// an access denied error. For a comparison of GetSessionToken with the other API
// operations that produce temporary credentials, see [Requesting Temporary Security Credentials]and [Comparing the Amazon Web Services STS API operations] in the IAM User Guide.
//
// No permissions are required for users to perform this operation. The purpose of
// the sts:GetSessionToken operation is to authenticate the user using MFA. You
// cannot use policies to control authentication operations. For more information,
// see [Permissions for GetSessionToken]in the IAM User Guide.
//
// # Session Duration
//
// The GetSessionToken operation must be called by using the long-term Amazon Web
// Services security credentials of an IAM user. Credentials that are created by
// IAM users are valid for the duration that you specify. This duration can range
// from 900 seconds (15 minutes) up to a maximum of 129,600 seconds (36 hours),
// with a default of 43,200 seconds (12 hours). Credentials based on account
// credentials can range from 900 seconds (15 minutes) up to 3,600 seconds (1
// hour), with a default of 1 hour.
//
// # Permissions
//
// The temporary security credentials created by GetSessionToken can be used to
// make API calls to any Amazon Web Services service with the following exceptions:
//
//   - You cannot call any IAM API operations unless MFA authentication
//     information is included in the request.
//
//   - You cannot call any STS API except AssumeRole or GetCallerIdentity .
//
// The credentials that GetSessionToken returns are based on permissions
// associated with the IAM user whose credentials were used to call the operation.
// The temporary credentials have the same permissions as the IAM user.
//
// Although it is possible to call GetSessionToken using the security credentials
// of an Amazon Web Services account root user rather than an IAM user, we do not
// recommend it. If GetSessionToken is called using root user credentials, the
// temporary credentials have root user permissions. For more information, see [Safeguard your root user credentials and don't use them for everyday tasks]in
// the IAM User Guide
//
// For more information about using GetSessionToken to create temporary
// credentials, see [Temporary Credentials for Users in Untrusted Environments]in the IAM User Guide.
//
// [Permissions for GetSessionToken]: https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_control-access_getsessiontoken.html
// [Comparing the Amazon Web Services STS API operations]: https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html#stsapi_comparison
// [Temporary Credentials for Users in Untrusted Environments]: https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html#api_getsessiontoken
// [Safeguard your root user credentials and don't use them for everyday tasks]: https://docs.aws.amazon.com/IAM/latest/UserGuide/best-practices.html#lock-away-credentials
// [Requesting Temporary Security Credentials]: https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html
func (c *Client) GetSessionToken(ctx context.Context, params *GetSessionTokenInput, optFns ...func(*Options)) (*GetSessionTokenOutput, error) {
	if params == nil {
		params = &GetSessionTokenInput{}
	}

	result, metadata, err := c.invokeOperation(ctx, "GetSessionToken", params, optFns, c.addOperationGetSessionTokenMiddlewares)
	if err != nil {
		return nil, err
	}

	out := result.(*GetSessionTokenOutput)
	out.ResultMetadata = metadata
	return out, nil
}

type GetSessionTokenInput struct {

	// The duration, in seconds, that the credentials should remain valid. Acceptable
	// durations for IAM user sessions range from 900 seconds (15 minutes) to 129,600
	// seconds (36 hours), with 43,200 seconds (12 hours) as the default. Sessions for
	// Amazon Web Services account owners are restricted to a maximum of 3,600 seconds
	// (one hour). If the duration is longer than one hour, the session for Amazon Web
	// Services account owners defaults to one hour.
	DurationSeconds *int32

	// The identification number of the MFA device that is associated with the IAM
	// user who is making the GetSessionToken call. Specify this value if the IAM user
	// has a policy that requires MFA authentication. The value is either the serial
	// number for a hardware device (such as GAHT12345678 ) or an Amazon Resource Name
	// (ARN) for a virtual device (such as arn:aws:iam::123456789012:mfa/user ). You
	// can find the device for an IAM user by going to the Amazon Web Services
	// Management Console and viewing the user's security credentials.
	//
	// The regex used to validate this parameter is a string of characters consisting
	// of upper- and lower-case alphanumeric characters with no spaces. You can also
	// include underscores or any of the following characters: =,.@:/-
	SerialNumber *string

	// The value provided by the MFA device, if MFA is required. If any policy
	// requires the IAM user to submit an MFA code, specify this value. If MFA
	// authentication is required, the user must provide a code when requesting a set
	// of temporary security credentials. A user who fails to provide the code receives
	// an "access denied" response when requesting resources that require MFA
	// authentication.
	//
	// The format for this parameter, as described by its regex pattern, is a sequence
	// of six numeric digits.
	TokenCode *string

	noSmithyDocumentSerde
}

// Contains the response to a successful GetSessionToken request, including temporary Amazon Web
// Services credentials that can be used to make Amazon Web Services requests.
type GetSessionTokenOutput struct {

	// The temporary security credentials, which include an access key ID, a secret
	// access key, and a security (or session) token.
	//
	// The size of the security token that STS API operations return is not fixed. We
	// strongly recommend that you make no assumptions about the maximum size.
	Credentials *types.Credentials

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata

	noSmithyDocumentSerde
}

func (c *Client) addOperationGetSessionTokenMiddlewares(stack *middleware.Stack, options Options) (err error) {
	if err := stack.Serialize.Add(&setOperationInputMiddleware{}, middleware.After); err != nil {
		return err
	}
	err = stack.Serialize.Add(&awsAwsquery_serializeOpGetSessionToken{}, middleware.After)
	if err != nil {
		return err
	}
	err = stack.Deserialize.Add(&awsAwsquery_deserializeOpGetSessionToken{}, middleware.After)
	if err != nil {
		return err
	}
	if err := addProtocolFinalizerMiddlewares(stack, options, "GetSessionToken"); err != nil {
		return fmt.Errorf("add protocol finalizers: %v", err)
	}

	if err = addlegacyEndpointContextSetter(stack, options); err != nil {
		return err
	}
	if err = addSetLoggerMiddleware(stack, options); err != nil {
		return err
	}
	if err = addClientRequestID(stack); err != nil {
		return err
	}
	if err = addComputeContentLength(stack); err != nil {
		return err
	}
	if err = addResolveEndpointMiddleware(stack, options); err != nil {
		return err
	}
	if err = addComputePayloadSHA256(stack); err != nil {
		return err
	}
	if err = addRetry(stack, options); err != nil {
		return err
	}
	if err = addRawResponseToMetadata(stack); err != nil {
		return err
	}
	if err = addRecordResponseTiming(stack); err != nil {
		return err
	}
	if err = addSpanRetryLoop(stack, options); err != nil {
		return err
	}
	if err = addClientUserAgent(stack, options); err != nil {
		return err
	}
	if err = smithyhttp.AddErrorCloseResponseBodyMiddleware(stack); err != nil {
		return err
	}
	if err = smithyhttp.AddCloseResponseBodyMiddleware(stack); err != nil {
		return err
	}
	if err = addSetLegacyContextSigningOptionsMiddleware(stack); err != nil {
		return err
	}
	if err = addTimeOffsetBuild(stack, c); err != nil {
		return err
	}
	if err = addUserAgentRetryMode(stack, options); err != nil {
		return err
	}
	if err = stack.Initialize.Add(newServiceMetadataMiddleware_opGetSessionToken(options.Region), middleware.Before); err != nil {
		return err
	}
	if err = addRecursionDetection(stack); err != nil {
		return err
	}
	if err = addRequestIDRetrieverMiddleware(stack); err != nil {
		return err
	}
	if err = addResponseErrorMiddleware(stack); err != nil {
		return err
	}
	if err = addRequestResponseLogging(stack, options); err != nil {
		return err
	}
	if err = addDisableHTTPSMiddleware(stack, options); err != nil {
		return err
	}
	if err = addSpanInitializeStart(stack); err != nil {
		return err
	}
	if err = addSpanInitializeEnd(stack); err != nil {
		return err
	}
	if err = addSpanBuildRequestStart(stack); err != nil {
		return err
	}
	if err = addSpanBuildRequestEnd(stack); err != nil {
		return err
	}
	return nil
}

func newServiceMetadataMiddleware_opGetSessionToken(region string) *awsmiddleware.RegisterServiceMetadata {
	return &awsmiddleware.RegisterServiceMetadata{
		Region:        region,
		ServiceID:     ServiceID,
		OperationName: "GetSessionToken",
	}
}