ceph-csi/vendor/k8s.io/kubernetes/hack/make-rules/test-e2e-node.sh

#!/usr/bin/env bash

# Copyright 2016 The Kubernetes Authors.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

KUBE_ROOT=$(dirname "${BASH_SOURCE}")/../..
source "${KUBE_ROOT}/hack/lib/init.sh"

focus=${FOCUS:-""}
skip=${SKIP-"\[Flaky\]|\[Slow\]|\[Serial\]"}
# The number of tests that can run in parallel depends on what tests
# are running and on the size of the node. Too many, and tests will
# fail due to resource contention. 8 is a reasonable default for a
# n1-standard-1 node.
# Currently, parallelism only affects when REMOTE=true. For local test,
# ginkgo default parallelism (cores - 1) is used.
parallelism=${PARALLELISM:-8}
artifacts=${ARTIFACTS:-"/tmp/_artifacts/`date +%y%m%dT%H%M%S`"}
remote=${REMOTE:-"false"}
runtime=${RUNTIME:-"docker"}
container_runtime_endpoint=${CONTAINER_RUNTIME_ENDPOINT:-""}
image_service_endpoint=${IMAGE_SERVICE_ENDPOINT:-""}
run_until_failure=${RUN_UNTIL_FAILURE:-"false"}
test_args=${TEST_ARGS:-""}
system_spec_name=${SYSTEM_SPEC_NAME:-}

# Parse the flags to pass to ginkgo
ginkgoflags=""
if [[ $parallelism > 1 ]]; then
  ginkgoflags="$ginkgoflags -nodes=$parallelism "
fi

if [[ $focus != "" ]]; then
  ginkgoflags="$ginkgoflags -focus=\"$focus\" "
fi

if [[ $skip != "" ]]; then
  ginkgoflags="$ginkgoflags -skip=\"$skip\" "
fi

if [[ $run_until_failure != "" ]]; then
  ginkgoflags="$ginkgoflags -untilItFails=$run_until_failure "
fi

# Setup the directory to copy test artifacts (logs, junit.xml, etc) from remote host to local host
if [ ! -d "${artifacts}" ]; then
  echo "Creating artifacts directory at ${artifacts}"
  mkdir -p ${artifacts}
fi
echo "Test artifacts will be written to ${artifacts}"

if [[ $runtime == "remote" ]] ; then
  if [[ ! -z $container_runtime_endpoint ]] ; then
    test_args="--container-runtime-endpoint=${container_runtime_endpoint} $test_args"
  fi
  if [[ ! -z $image_service_endpoint ]] ; then
    test_args="--image-service-endpoint=$image_service_endpoint $test_args"
  fi
fi


if [ $remote = true ] ; then
  # The following options are only valid in remote run.
  images=${IMAGES:-""}
  hosts=${HOSTS:-""}
  image_project=${IMAGE_PROJECT:-"kubernetes-node-e2e-images"}
  metadata=${INSTANCE_METADATA:-""}
  list_images=${LIST_IMAGES:-false}
  if  [[ $list_images == "true" ]]; then
    gcloud compute images list --project="${image_project}" | grep "e2e-node"
    exit 0
  fi
  gubernator=${GUBERNATOR:-"false"}
  image_config_file=${IMAGE_CONFIG_FILE:-""}
  if [[ $hosts == "" && $images == "" && $image_config_file == "" ]]; then
    image_project=${IMAGE_PROJECT:-"cos-cloud"}
    gci_image=$(gcloud compute images list --project $image_project \
    --no-standard-images --filter="name ~ 'cos-beta.*'" --format="table[no-heading](name)")
    images=$gci_image
    metadata="user-data<${KUBE_ROOT}/test/e2e_node/jenkins/gci-init.yaml,gci-update-strategy=update_disabled"
  fi
  instance_prefix=${INSTANCE_PREFIX:-"test"}
  cleanup=${CLEANUP:-"true"}
  delete_instances=${DELETE_INSTANCES:-"false"}
  test_suite=${TEST_SUITE:-"default"}

  # Get the compute zone
  zone=$(gcloud info --format='value(config.properties.compute.zone)')
  if [[ $zone == "" ]]; then
    echo "Could not find gcloud compute/zone when running: \`gcloud info --format='value(config.properties.compute.zone)'\`"
    exit 1
  fi

  # Get the compute project
  project=$(gcloud info --format='value(config.project)')
  if [[ $project == "" ]]; then
    echo "Could not find gcloud project when running: \`gcloud info --format='value(config.project)'\`"
    exit 1
  fi

  # Check if any of the images specified already have running instances.  If so reuse those instances
  # by moving the IMAGE to a HOST
  if [[ $images != "" ]]; then
  IFS=',' read -ra IM <<< "$images"
       images=""
       for i in "${IM[@]}"; do
         if [[ $(gcloud compute instances list "${instance_prefix}-$i" | grep $i) ]]; then
           if [[ $hosts != "" ]]; then
             hosts="$hosts,"
           fi
           echo "Reusing host ${instance_prefix}-$i"
           hosts="${hosts}${instance_prefix}-${i}"
         else
           if [[ $images != "" ]]; then
             images="$images,"
           fi
           images="$images$i"
         fi
       done
  fi

  # Output the configuration we will try to run
  echo "Running tests remotely using"
  echo "Project: $project"
  echo "Image Project: $image_project"
  echo "Compute/Zone: $zone"
  echo "Images: $images"
  echo "Hosts: $hosts"
  echo "Ginkgo Flags: $ginkgoflags"
  echo "Instance Metadata: $metadata"
  echo "Image Config File: $image_config_file"
  # Invoke the runner
  go run test/e2e_node/runner/remote/run_remote.go  --logtostderr --vmodule=*=4 --ssh-env="gce" \
    --zone="$zone" --project="$project" --gubernator="$gubernator" \
    --hosts="$hosts" --images="$images" --cleanup="$cleanup" \
    --results-dir="$artifacts" --ginkgo-flags="$ginkgoflags" \
    --image-project="$image_project" --instance-name-prefix="$instance_prefix" \
    --delete-instances="$delete_instances" --test_args="$test_args" --instance-metadata="$metadata" \
    --image-config-file="$image_config_file" --system-spec-name="$system_spec_name" \
    --test-suite="$test_suite" \
    2>&1 | tee -i "${artifacts}/build-log.txt"
  exit $?

else
  # Refresh sudo credentials for local run
  if ! ping -c 1 -q metadata.google.internal &> /dev/null; then
    echo "Updating sudo credentials"
    sudo -v || exit 1
  fi

  # Do not use any network plugin by default. User could override the flags with
  # test_args.
  test_args='--kubelet-flags="--network-plugin= --cni-bin-dir=" '$test_args

  # Runtime flags
  test_args='--kubelet-flags="--container-runtime='$runtime'" '$test_args

  # Test using the host the script was run on
  # Provided for backwards compatibility
  go run test/e2e_node/runner/local/run_local.go \
    --system-spec-name="$system_spec_name" --ginkgo-flags="$ginkgoflags" \
    --test-flags="--container-runtime=${runtime} \
    --alsologtostderr --v 4 --report-dir=${artifacts} --node-name $(hostname) \
    $test_args" --build-dependencies=true 2>&1 | tee -i "${artifacts}/build-log.txt"
  exit $?
fi