mirror of
https://github.com/ceph/ceph-csi.git
synced 2024-11-27 16:50:23 +00:00
c4a3675cec
As detailed in issue #279, current lock scheme has hash buckets that are count of CPUs. This causes a lot of contention when parallel requests are made to the CSI plugin. To reduce lock contention, this commit introduces granular locks per identifier. The commit also changes the timeout for gRPC requests to Create and Delete volumes, as the current timeout is 10s (kubernetes documentation says 15s but code defaults are 10s). A virtual setup takes about 12-15s to complete a request at times, that leads to unwanted retries of the same request, hence the increased timeout to enable operation completion with minimal retries. Tests to create PVCs before and after these changes look like so, Before: Default master code + sidecar provisioner --timeout option set to 30 seconds 20 PVCs Creation: 3 runs, 396/391/400 seconds Deletion: 3 runs, 218/271/118 seconds - Once was stalled for more than 8 minutes and cancelled the run After: Current commit + sidecar provisioner --timeout option set to 30 sec 20 PVCs Creation: 3 runs, 42/59/65 seconds Deletion: 3 runs, 32/32/31 seconds Fixes: #279 Signed-off-by: ShyamsundarR <srangana@redhat.com>
530 lines
17 KiB
Go
530 lines
17 KiB
Go
/*
|
|
Copyright 2018 The Ceph-CSI Authors.
|
|
|
|
Licensed under the Apache License, Version 2.0 (the "License");
|
|
you may not use this file except in compliance with the License.
|
|
You may obtain a copy of the License at
|
|
|
|
http://www.apache.org/licenses/LICENSE-2.0
|
|
|
|
Unless required by applicable law or agreed to in writing, software
|
|
distributed under the License is distributed on an "AS IS" BASIS,
|
|
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
See the License for the specific language governing permissions and
|
|
limitations under the License.
|
|
*/
|
|
|
|
package rbd
|
|
|
|
import (
|
|
"fmt"
|
|
|
|
csicommon "github.com/ceph/ceph-csi/pkg/csi-common"
|
|
"github.com/ceph/ceph-csi/pkg/util"
|
|
|
|
"github.com/container-storage-interface/spec/lib/go/csi"
|
|
"github.com/kubernetes-csi/csi-lib-utils/protosanitizer"
|
|
"golang.org/x/net/context"
|
|
"google.golang.org/grpc/codes"
|
|
"google.golang.org/grpc/status"
|
|
"k8s.io/klog"
|
|
)
|
|
|
|
const (
|
|
oneGB = 1073741824
|
|
)
|
|
|
|
// ControllerServer struct of rbd CSI driver with supported methods of CSI
|
|
// controller server spec.
|
|
type ControllerServer struct {
|
|
*csicommon.DefaultControllerServer
|
|
}
|
|
|
|
func (cs *ControllerServer) validateVolumeReq(req *csi.CreateVolumeRequest) error {
|
|
if err := cs.Driver.ValidateControllerServiceRequest(csi.ControllerServiceCapability_RPC_CREATE_DELETE_VOLUME); err != nil {
|
|
klog.V(3).Infof("invalid create volume req: %v", protosanitizer.StripSecrets(req))
|
|
return err
|
|
}
|
|
// Check sanity of request Name, Volume Capabilities
|
|
if req.Name == "" {
|
|
return status.Error(codes.InvalidArgument, "volume Name cannot be empty")
|
|
}
|
|
if req.VolumeCapabilities == nil {
|
|
return status.Error(codes.InvalidArgument, "volume Capabilities cannot be empty")
|
|
}
|
|
options := req.GetParameters()
|
|
if value, ok := options["clusterID"]; !ok || value == "" {
|
|
return status.Error(codes.InvalidArgument, "missing or empty cluster ID to provision volume from")
|
|
}
|
|
if value, ok := options["pool"]; !ok || value == "" {
|
|
return status.Error(codes.InvalidArgument, "missing or empty pool name to provision volume from")
|
|
}
|
|
return nil
|
|
}
|
|
|
|
func (cs *ControllerServer) parseVolCreateRequest(req *csi.CreateVolumeRequest) (*rbdVolume, error) {
|
|
// TODO (sbezverk) Last check for not exceeding total storage capacity
|
|
|
|
isMultiNode := false
|
|
isBlock := false
|
|
for _, cap := range req.VolumeCapabilities {
|
|
// RO modes need to be handled indepedently (ie right now even if access mode is RO, they'll be RW upon attach)
|
|
if cap.GetAccessMode().GetMode() == csi.VolumeCapability_AccessMode_MULTI_NODE_MULTI_WRITER {
|
|
isMultiNode = true
|
|
}
|
|
if cap.GetBlock() != nil {
|
|
isBlock = true
|
|
}
|
|
}
|
|
|
|
// We want to fail early if the user is trying to create a RWX on a non-block type device
|
|
if isMultiNode && !isBlock {
|
|
return nil, status.Error(codes.InvalidArgument, "multi node access modes are only supported on rbd `block` type volumes")
|
|
}
|
|
|
|
// if it's NOT SINGLE_NODE_WRITER and it's BLOCK we'll set the parameter to ignore the in-use checks
|
|
rbdVol, err := genVolFromVolumeOptions(req.GetParameters(), (isMultiNode && isBlock))
|
|
if err != nil {
|
|
return nil, status.Error(codes.InvalidArgument, err.Error())
|
|
}
|
|
|
|
rbdVol.RequestName = req.GetName()
|
|
|
|
// Volume Size - Default is 1 GiB
|
|
volSizeBytes := int64(oneGB)
|
|
if req.GetCapacityRange() != nil {
|
|
volSizeBytes = req.GetCapacityRange().GetRequiredBytes()
|
|
}
|
|
|
|
// always round up the request size in bytes to the nearest MiB
|
|
rbdVol.VolSize = util.MiB * util.RoundUpToMiB(volSizeBytes)
|
|
|
|
// NOTE: rbdVol does not contain VolID and RbdImageName populated, everything
|
|
// else is populated post create request parsing
|
|
return rbdVol, nil
|
|
}
|
|
|
|
// CreateVolume creates the volume in backend
|
|
func (cs *ControllerServer) CreateVolume(ctx context.Context, req *csi.CreateVolumeRequest) (*csi.CreateVolumeResponse, error) {
|
|
|
|
if err := cs.validateVolumeReq(req); err != nil {
|
|
return nil, err
|
|
}
|
|
|
|
cr, err := util.GetUserCredentials(req.GetSecrets())
|
|
if err != nil {
|
|
return nil, status.Error(codes.Internal, err.Error())
|
|
}
|
|
|
|
rbdVol, err := cs.parseVolCreateRequest(req)
|
|
if err != nil {
|
|
return nil, err
|
|
}
|
|
|
|
idLk := volumeNameLocker.Lock(req.GetName())
|
|
defer volumeNameLocker.Unlock(idLk, req.GetName())
|
|
|
|
found, err := checkVolExists(rbdVol, cr)
|
|
if err != nil {
|
|
if _, ok := err.(ErrVolNameConflict); ok {
|
|
return nil, status.Error(codes.AlreadyExists, err.Error())
|
|
}
|
|
|
|
return nil, status.Error(codes.Internal, err.Error())
|
|
}
|
|
if found {
|
|
return &csi.CreateVolumeResponse{
|
|
Volume: &csi.Volume{
|
|
VolumeId: rbdVol.VolID,
|
|
CapacityBytes: rbdVol.VolSize,
|
|
VolumeContext: req.GetParameters(),
|
|
},
|
|
}, nil
|
|
}
|
|
|
|
err = reserveVol(rbdVol, cr)
|
|
if err != nil {
|
|
return nil, status.Error(codes.Internal, err.Error())
|
|
}
|
|
defer func() {
|
|
if err != nil {
|
|
errDefer := undoVolReservation(rbdVol, cr)
|
|
if errDefer != nil {
|
|
klog.Warningf("failed undoing reservation of volume: %s (%s)", req.GetName(), errDefer)
|
|
}
|
|
}
|
|
}()
|
|
|
|
err = cs.createBackingImage(rbdVol, req, util.RoundUpToMiB(rbdVol.VolSize))
|
|
if err != nil {
|
|
return nil, err
|
|
}
|
|
|
|
return &csi.CreateVolumeResponse{
|
|
Volume: &csi.Volume{
|
|
VolumeId: rbdVol.VolID,
|
|
CapacityBytes: rbdVol.VolSize,
|
|
VolumeContext: req.GetParameters(),
|
|
},
|
|
}, nil
|
|
}
|
|
|
|
func (cs *ControllerServer) createBackingImage(rbdVol *rbdVolume, req *csi.CreateVolumeRequest, volSizeMiB int64) error {
|
|
var err error
|
|
|
|
// if VolumeContentSource is not nil, this request is for snapshot
|
|
if req.VolumeContentSource != nil {
|
|
if err = cs.checkSnapshot(req, rbdVol); err != nil {
|
|
return err
|
|
}
|
|
} else {
|
|
cr, err := util.GetUserCredentials(req.GetSecrets())
|
|
if err != nil {
|
|
return status.Error(codes.Internal, err.Error())
|
|
}
|
|
|
|
err = createImage(rbdVol, volSizeMiB, cr)
|
|
if err != nil {
|
|
klog.Warningf("failed to create volume: %v", err)
|
|
return status.Error(codes.Internal, err.Error())
|
|
}
|
|
|
|
klog.V(4).Infof("created image %s", rbdVol.RbdImageName)
|
|
}
|
|
|
|
return nil
|
|
}
|
|
func (cs *ControllerServer) checkSnapshot(req *csi.CreateVolumeRequest, rbdVol *rbdVolume) error {
|
|
snapshot := req.VolumeContentSource.GetSnapshot()
|
|
if snapshot == nil {
|
|
return status.Error(codes.InvalidArgument, "volume Snapshot cannot be empty")
|
|
}
|
|
|
|
snapshotID := snapshot.GetSnapshotId()
|
|
if snapshotID == "" {
|
|
return status.Error(codes.InvalidArgument, "volume Snapshot ID cannot be empty")
|
|
}
|
|
|
|
cr, err := util.GetUserCredentials(req.GetSecrets())
|
|
if err != nil {
|
|
return status.Error(codes.Internal, err.Error())
|
|
}
|
|
|
|
rbdSnap := &rbdSnapshot{}
|
|
if err = genSnapFromSnapID(rbdSnap, snapshotID, cr); err != nil {
|
|
if _, ok := err.(ErrSnapNotFound); !ok {
|
|
return status.Error(codes.Internal, err.Error())
|
|
}
|
|
return status.Error(codes.InvalidArgument, "missing requested Snapshot ID")
|
|
}
|
|
|
|
err = restoreSnapshot(rbdVol, rbdSnap, cr)
|
|
if err != nil {
|
|
return status.Error(codes.Internal, err.Error())
|
|
}
|
|
klog.V(4).Infof("create volume %s from snapshot %s", req.GetName(), rbdSnap.RbdSnapName)
|
|
return nil
|
|
}
|
|
|
|
// DeleteVolume deletes the volume in backend and removes the volume metadata
|
|
// from store
|
|
func (cs *ControllerServer) DeleteVolume(ctx context.Context, req *csi.DeleteVolumeRequest) (*csi.DeleteVolumeResponse, error) {
|
|
if err := cs.Driver.ValidateControllerServiceRequest(csi.ControllerServiceCapability_RPC_CREATE_DELETE_VOLUME); err != nil {
|
|
klog.Warningf("invalid delete volume req: %v", protosanitizer.StripSecrets(req))
|
|
return nil, err
|
|
}
|
|
|
|
cr, err := util.GetUserCredentials(req.GetSecrets())
|
|
if err != nil {
|
|
return nil, status.Error(codes.Internal, err.Error())
|
|
}
|
|
|
|
// For now the image get unconditionally deleted, but here retention policy can be checked
|
|
volumeID := req.GetVolumeId()
|
|
if volumeID == "" {
|
|
return nil, status.Error(codes.InvalidArgument, "empty volume ID in request")
|
|
}
|
|
|
|
rbdVol := &rbdVolume{}
|
|
if err := genVolFromVolID(rbdVol, volumeID, cr); err != nil {
|
|
// if error is ErrKeyNotFound, then a previous attempt at deletion was complete
|
|
// or partially complete (image and imageOMap are garbage collected already), hence return
|
|
// success as deletion is complete
|
|
if _, ok := err.(util.ErrKeyNotFound); ok {
|
|
return &csi.DeleteVolumeResponse{}, nil
|
|
}
|
|
|
|
// All errors other than ErrImageNotFound should return an error back to the caller
|
|
if _, ok := err.(ErrImageNotFound); !ok {
|
|
return nil, status.Error(codes.Internal, err.Error())
|
|
}
|
|
|
|
// If error is ErrImageNotFound then we failed to find the image, but found the imageOMap
|
|
// to lead us to the image, hence the imageOMap needs to be garbage collected, by calling
|
|
// unreserve for the same
|
|
idLk := volumeNameLocker.Lock(rbdVol.RequestName)
|
|
defer volumeNameLocker.Unlock(idLk, rbdVol.RequestName)
|
|
|
|
if err := undoVolReservation(rbdVol, cr); err != nil {
|
|
return nil, status.Error(codes.Internal, err.Error())
|
|
}
|
|
return &csi.DeleteVolumeResponse{}, nil
|
|
}
|
|
|
|
// lock out parallel create requests against the same volume name as we
|
|
// cleanup the image and associated omaps for the same
|
|
idLk := volumeNameLocker.Lock(rbdVol.RequestName)
|
|
defer volumeNameLocker.Unlock(idLk, rbdVol.RequestName)
|
|
|
|
// Deleting rbd image
|
|
klog.V(4).Infof("deleting image %s", rbdVol.RbdImageName)
|
|
if err := deleteImage(rbdVol, cr); err != nil {
|
|
klog.Errorf("failed to delete rbd image: %s/%s with error: %v",
|
|
rbdVol.Pool, rbdVol.RbdImageName, err)
|
|
return nil, status.Error(codes.Internal, err.Error())
|
|
}
|
|
|
|
return &csi.DeleteVolumeResponse{}, nil
|
|
}
|
|
|
|
// ValidateVolumeCapabilities checks whether the volume capabilities requested
|
|
// are supported.
|
|
func (cs *ControllerServer) ValidateVolumeCapabilities(ctx context.Context, req *csi.ValidateVolumeCapabilitiesRequest) (*csi.ValidateVolumeCapabilitiesResponse, error) {
|
|
if req.GetVolumeId() == "" {
|
|
return nil, status.Error(codes.InvalidArgument, "empty volume ID in request")
|
|
}
|
|
|
|
if len(req.VolumeCapabilities) == 0 {
|
|
return nil, status.Error(codes.InvalidArgument, "empty volume capabilities in request")
|
|
}
|
|
|
|
for _, cap := range req.VolumeCapabilities {
|
|
if cap.GetAccessMode().GetMode() != csi.VolumeCapability_AccessMode_SINGLE_NODE_WRITER {
|
|
return &csi.ValidateVolumeCapabilitiesResponse{Message: ""}, nil
|
|
}
|
|
}
|
|
return &csi.ValidateVolumeCapabilitiesResponse{
|
|
Confirmed: &csi.ValidateVolumeCapabilitiesResponse_Confirmed{
|
|
VolumeCapabilities: req.VolumeCapabilities,
|
|
},
|
|
}, nil
|
|
}
|
|
|
|
// CreateSnapshot creates the snapshot in backend and stores metadata
|
|
// in store
|
|
// nolint: gocyclo
|
|
func (cs *ControllerServer) CreateSnapshot(ctx context.Context, req *csi.CreateSnapshotRequest) (*csi.CreateSnapshotResponse, error) {
|
|
if err := cs.validateSnapshotReq(req); err != nil {
|
|
return nil, err
|
|
}
|
|
|
|
cr, err := util.GetUserCredentials(req.GetSecrets())
|
|
if err != nil {
|
|
return nil, status.Error(codes.Internal, err.Error())
|
|
}
|
|
|
|
// Fetch source volume information
|
|
rbdVol := new(rbdVolume)
|
|
err = genVolFromVolID(rbdVol, req.GetSourceVolumeId(), cr)
|
|
if err != nil {
|
|
if _, ok := err.(ErrImageNotFound); ok {
|
|
return nil, status.Errorf(codes.NotFound, "source Volume ID %s not found", req.GetSourceVolumeId())
|
|
}
|
|
return nil, status.Errorf(codes.Internal, err.Error())
|
|
}
|
|
|
|
// Check if source volume was created with required image features for snaps
|
|
if !hasSnapshotFeature(rbdVol.ImageFeatures) {
|
|
return nil, status.Errorf(codes.InvalidArgument, "volume(%s) has not snapshot feature(layering)", req.GetSourceVolumeId())
|
|
}
|
|
|
|
// Create snap volume
|
|
rbdSnap := genSnapFromOptions(rbdVol, req.GetParameters())
|
|
rbdSnap.RbdImageName = rbdVol.RbdImageName
|
|
rbdSnap.SizeBytes = rbdVol.VolSize
|
|
rbdSnap.SourceVolumeID = req.GetSourceVolumeId()
|
|
rbdSnap.RequestName = req.GetName()
|
|
|
|
idLk := snapshotNameLocker.Lock(req.GetName())
|
|
defer snapshotNameLocker.Unlock(idLk, req.GetName())
|
|
|
|
// Need to check for already existing snapshot name, and if found
|
|
// check for the requested source volume id and already allocated source volume id
|
|
found, err := checkSnapExists(rbdSnap, cr)
|
|
if err != nil {
|
|
if _, ok := err.(util.ErrSnapNameConflict); ok {
|
|
return nil, status.Error(codes.AlreadyExists, err.Error())
|
|
}
|
|
|
|
return nil, status.Errorf(codes.Internal, err.Error())
|
|
}
|
|
if found {
|
|
return &csi.CreateSnapshotResponse{
|
|
Snapshot: &csi.Snapshot{
|
|
SizeBytes: rbdSnap.SizeBytes,
|
|
SnapshotId: rbdSnap.SnapID,
|
|
SourceVolumeId: rbdSnap.SourceVolumeID,
|
|
CreationTime: rbdSnap.CreatedAt,
|
|
ReadyToUse: true,
|
|
},
|
|
}, nil
|
|
}
|
|
|
|
err = reserveSnap(rbdSnap, cr)
|
|
if err != nil {
|
|
return nil, status.Error(codes.Internal, err.Error())
|
|
}
|
|
defer func() {
|
|
if err != nil {
|
|
errDefer := undoSnapReservation(rbdSnap, cr)
|
|
if errDefer != nil {
|
|
klog.Warningf("failed undoing reservation of snapshot: %s %v", req.GetName(), errDefer)
|
|
}
|
|
}
|
|
}()
|
|
|
|
err = cs.doSnapshot(rbdSnap, cr)
|
|
if err != nil {
|
|
return nil, err
|
|
}
|
|
|
|
return &csi.CreateSnapshotResponse{
|
|
Snapshot: &csi.Snapshot{
|
|
SizeBytes: rbdSnap.SizeBytes,
|
|
SnapshotId: rbdSnap.SnapID,
|
|
SourceVolumeId: req.GetSourceVolumeId(),
|
|
CreationTime: rbdSnap.CreatedAt,
|
|
ReadyToUse: true,
|
|
},
|
|
}, nil
|
|
}
|
|
|
|
func (cs *ControllerServer) validateSnapshotReq(req *csi.CreateSnapshotRequest) error {
|
|
if err := cs.Driver.ValidateControllerServiceRequest(csi.ControllerServiceCapability_RPC_CREATE_DELETE_SNAPSHOT); err != nil {
|
|
klog.Warningf("invalid create snapshot req: %v", protosanitizer.StripSecrets(req))
|
|
return err
|
|
}
|
|
|
|
// Check sanity of request Snapshot Name, Source Volume Id
|
|
if req.Name == "" {
|
|
return status.Error(codes.InvalidArgument, "snapshot Name cannot be empty")
|
|
}
|
|
if req.SourceVolumeId == "" {
|
|
return status.Error(codes.InvalidArgument, "source Volume ID cannot be empty")
|
|
}
|
|
|
|
return nil
|
|
}
|
|
|
|
func (cs *ControllerServer) doSnapshot(rbdSnap *rbdSnapshot, cr *util.Credentials) (err error) {
|
|
err = createSnapshot(rbdSnap, cr)
|
|
// If snap creation fails, even due to snapname already used, fail, next attempt will get a new
|
|
// uuid for use as the snap name
|
|
if err != nil {
|
|
klog.Errorf("failed to create snapshot: %v", err)
|
|
return status.Error(codes.Internal, err.Error())
|
|
}
|
|
defer func() {
|
|
if err != nil {
|
|
errDefer := deleteSnapshot(rbdSnap, cr)
|
|
if errDefer != nil {
|
|
klog.Errorf("failed to delete snapshot: %v", errDefer)
|
|
err = fmt.Errorf("snapshot created but failed to delete snapshot due to"+
|
|
" other failures: %v", err)
|
|
}
|
|
err = status.Error(codes.Internal, err.Error())
|
|
}
|
|
}()
|
|
|
|
err = protectSnapshot(rbdSnap, cr)
|
|
if err != nil {
|
|
klog.Errorf("failed to protect snapshot: %v", err)
|
|
return status.Error(codes.Internal, err.Error())
|
|
}
|
|
defer func() {
|
|
if err != nil {
|
|
errDefer := unprotectSnapshot(rbdSnap, cr)
|
|
if errDefer != nil {
|
|
klog.Errorf("failed to unprotect snapshot: %v", errDefer)
|
|
err = fmt.Errorf("snapshot created but failed to unprotect snapshot due to"+
|
|
" other failures: %v", err)
|
|
}
|
|
err = status.Error(codes.Internal, err.Error())
|
|
}
|
|
}()
|
|
|
|
err = getSnapshotMetadata(rbdSnap, cr)
|
|
if err != nil {
|
|
klog.Errorf("failed to fetch snapshot metadata: %v", err)
|
|
return status.Error(codes.Internal, err.Error())
|
|
}
|
|
|
|
return nil
|
|
}
|
|
|
|
// DeleteSnapshot deletes the snapshot in backend and removes the
|
|
// snapshot metadata from store
|
|
func (cs *ControllerServer) DeleteSnapshot(ctx context.Context, req *csi.DeleteSnapshotRequest) (*csi.DeleteSnapshotResponse, error) {
|
|
if err := cs.Driver.ValidateControllerServiceRequest(csi.ControllerServiceCapability_RPC_CREATE_DELETE_SNAPSHOT); err != nil {
|
|
klog.Warningf("invalid delete snapshot req: %v", protosanitizer.StripSecrets(req))
|
|
return nil, err
|
|
}
|
|
|
|
cr, err := util.GetUserCredentials(req.GetSecrets())
|
|
if err != nil {
|
|
return nil, status.Error(codes.Internal, err.Error())
|
|
}
|
|
|
|
snapshotID := req.GetSnapshotId()
|
|
if snapshotID == "" {
|
|
return nil, status.Error(codes.InvalidArgument, "snapshot ID cannot be empty")
|
|
}
|
|
|
|
rbdSnap := &rbdSnapshot{}
|
|
if err = genSnapFromSnapID(rbdSnap, snapshotID, cr); err != nil {
|
|
// if error is ErrKeyNotFound, then a previous attempt at deletion was complete
|
|
// or partially complete (snap and snapOMap are garbage collected already), hence return
|
|
// success as deletion is complete
|
|
if _, ok := err.(util.ErrKeyNotFound); ok {
|
|
return &csi.DeleteSnapshotResponse{}, nil
|
|
}
|
|
|
|
// All errors other than ErrSnapNotFound should return an error back to the caller
|
|
if _, ok := err.(ErrSnapNotFound); !ok {
|
|
return nil, status.Error(codes.Internal, err.Error())
|
|
}
|
|
|
|
// Consider missing snap as already deleted, and proceed to remove the omap values,
|
|
// safeguarding against parallel create or delete requests against the same name.
|
|
idLk := snapshotNameLocker.Lock(rbdSnap.RequestName)
|
|
defer snapshotNameLocker.Unlock(idLk, rbdSnap.RequestName)
|
|
|
|
if err = undoSnapReservation(rbdSnap, cr); err != nil {
|
|
return nil, status.Error(codes.Internal, err.Error())
|
|
}
|
|
return &csi.DeleteSnapshotResponse{}, nil
|
|
}
|
|
|
|
// safeguard against parallel create or delete requests against the same name
|
|
idLk := snapshotNameLocker.Lock(rbdSnap.RequestName)
|
|
defer snapshotNameLocker.Unlock(idLk, rbdSnap.RequestName)
|
|
|
|
// Unprotect snapshot
|
|
err = unprotectSnapshot(rbdSnap, cr)
|
|
if err != nil {
|
|
return nil, status.Errorf(codes.FailedPrecondition,
|
|
"failed to unprotect snapshot: %s/%s with error: %v",
|
|
rbdSnap.Pool, rbdSnap.RbdSnapName, err)
|
|
}
|
|
|
|
// Deleting snapshot
|
|
klog.V(4).Infof("deleting Snaphot %s", rbdSnap.RbdSnapName)
|
|
if err := deleteSnapshot(rbdSnap, cr); err != nil {
|
|
return nil, status.Errorf(codes.FailedPrecondition,
|
|
"failed to delete snapshot: %s/%s with error: %v",
|
|
rbdSnap.Pool, rbdSnap.RbdSnapName, err)
|
|
}
|
|
|
|
return &csi.DeleteSnapshotResponse{}, nil
|
|
}
|