Recently the k8s.io/mount-utils package added more runtime dectection.
When creating a new Mounter, the detect is run every time. This is
unfortunate, as it logs a message like the following:
```
mount_linux.go:283] Detected umount with safe 'not mounted' behavior
```
This message might be useful, so it probably good to keep it.
In Ceph-CSI there are various locations where Mounter instances are
created. Moving that to the DefaultNodeServer type reduces it to a
single place. Some utility functions need to accept the additional
parameter too, so that has been modified as well.
See-also: kubernetes/kubernetes#109676
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Looks like cephfs snapshot size is buggy and its
getting removed in ceph fs. we cannot get the size
of the snapshot during CreateVolume call, so we cannot
do any size check at CreateVolume to check if the
restore size is smaller or not.
As we are removing this check it also fixes#3147
but we dont have any validation at CSI level for
smaller restore we need to depend on kubernetes
external-provisioner for it.
fixes: #3147
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Due to the bug in the df stat we need to round off
the subvolume size to align with 4Mib.
Note:- Minimum supported size in cephcsi is 1Mib,
we dont need to take care of Kib.
fixes#3240
More details at https://github.com/ceph/ceph/pull/46905
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
While creating subvolumes, CephFS driver set the mode to `777`
and pass it along to go ceph apis which cause the subvolume
permission to be on 777, however if we create a subvolume
directly in the ceph cluster, the default permission bits are
set which is 755 for the subvolume. This commit try to stick
to the default behaviour even while creating the subvolume.
This also means that we can work with fsgrouppolicy set to
`File` in csiDriver object which is also addressed in this commit.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
When the Ceph user is restricted to a specific namespace in the pool, it is
crucial that evey interaction with the cluster is done within that namespace.
This wasn't the case in `getCloneDepth()`.
This issue was causing snapshot creation to fail with
> Failed to check and update snapshot content: failed to take snapshot of the
> volume X: "rpc error: code = Internal desc = rbd: ret=-1, Operation not
> permitted"
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
There are regular reports that identify a non-error as the cause of
failures. The Kubernetes mount-utils package has detection for systemd
based environments, and if systemd is unavailable, the following error
is logged:
Cannot run systemd-run, assuming non-systemd OS
systemd-run output: System has not been booted with systemd as init
system (PID 1). Can't operate.
Failed to create bus connection: Host is down, failed with: exit status 1
Because of the `failed` and `exit status 1` error message, users might
assume that the mounting failed. This does not need to be the case. The
container-images that the Ceph-CSI projects provides, do not use
systemd, so the error will get logged with each mount attempt.
By using the newer MountSensitiveWithoutSystemd() function from the
mount-utils package where we can, the number of confusing logs get
reduced.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
go-ceph provides a new GetFailure() method to retrieve details errors
when cloning failed. This is now included in the `cephFSCloneState`
struct, which was a simple string before.
While modifying the `cephFSCloneState` struct, the constants have been
removed, as go-ceph provides them as well.
Fixes: #3140
Signed-off-by: Niels de Vos <ndevos@redhat.com>
This commit removes the clone incase
unsetAllMetadata or copyEncryptionConfig or
expand fails for createVolumeFromSnapshot
and CreateSnapshot.
It also removes the clone in case of
any failure in createCloneFromImage.
issue: #3103
Signed-off-by: Yati Padia <ypadia@redhat.com>
Address: hugeParam linter
internal/controller/persistentvolume/persistentvolume.go:59:7:
hugeParam: r is heavy (80 bytes); consider passing it by pointer
(gocritic)
[...]
internal/controller/persistentvolume/persistentvolume.go:135:7:
hugeParam: r is heavy (80 bytes); consider passing it by pointer
(gocritic)
func (r ReconcilePersistentVolume) reconcilePV(ctx context.Context, obj
runtime.Object) error {}
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
As we added support to set the metadata on the rbd images created for
the PVC and volume snapshot, by default metadata is set on all the images.
As we have seen we are hitting issues#2327 a lot of times with this,
we start to leave a lot of stale images. Currently, we rely on
`--extra-create-metadata=true` to decide to set the metadata or not,
we cannot set this option to false to disable setting metadata because we
use this for encryption too.
This changes is to provide an option to disable setting the image
metadata when starting cephcsi.
Fixes: #3009
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Removed the code in checkHealthyPrimary which
makes the ceph call, passing it as input now.
Added unit test for checkHealthyPrimary function
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
we need to check for image should be in up+stopped state
not anyone of the state for that the we need to use
OR check not the AND check.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
When the image is force promoted to primary on the
cluster the remote image might not be in replaying
state because due to the split brain state. This
PR reverts back the commit
c3c87f2ef3. Which we added
to check the remote image status.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Kubernetes 1.24 and newer use a different path for staging the volume.
That means the CSI-driver is requested to mount the volume at an other
location, compared to previous versions of Kubernetes. CSI-drivers
implementing the volumeHealer, must receive the correct path, otherwise
the after a nodeplugin restart the NBD mounts will bailout attempting
to NodeStageVolume() call and return an error.
See-also: kubernetes/kubernetes#107065
Fixes: #3176
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
During failover we do demote the volume on the primary
as the image is still not promoted yet on the remote cluster,
there are spurious split-brain errors reported by RBD,
the Cephcsi resync will attempt to resync from the "known"
secondary and that will cause data loss
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
create the token if kubernetes version in
1.24+ and use it for vault sa.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Signed-off-by: Rakshith R <rar@redhat.com>
This commit implements most of
docs/design/proposals/cephfs-snapshot-shallow-ro-vol.md design document;
specifically (de-)provisioning of snapshot-backed volumes, mounting such
volumes as well as mounting pre-provisioned snapshot-backed volumes.
Signed-off-by: Robert Vasek <robert.vasek@cern.ch>
RBD supports creating rbd images with
object size, stripe unit and stripe count
to support striping. This PR adds the support
for the same.
More details about striping at
https://docs.ceph.com/en/quincy/man/8/rbd/#stripingfixes: #3124
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
This change helps read the cluster name from the cmdline args,
the provisioner will set the same on the RBD images.
Fixes: #2973
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
In case of pre-provisioned volume the clusterID is
not set in the volume context as the clusterID is missing
we cannot extract the NetNamespaceFilePath from the
configuration file. For static volume and dynamically
provisioned volume the clusterID is set.
Note:- This is a special case to support mounting PV
without clusterID parameter.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Before the change, the error msg was the following:
```
failed to set VAULT_AUTH_MOUNT_PATH in Vault config: path is empty
```
`vaultAuthPath` is the actual variable name set by the
user. The error message will now be the following:
```
failed to set "vaultAuthPath" in vault config: path is empty
```
Signed-off-by: Rakshith R <rar@redhat.com>
This commit adds support for pvc-pvc clone.
Only capability needed to be advertised, the
underlying support is already provided by cephfs
backend.
Signed-off-by: Rakshith R <rar@redhat.com>
continue running rbd driver when /sys/bus/rbd/supported_features file is
missing, do not bailout.
Fixes: #2678
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
krbdFeatures is set to zero when kernel version < 3.8, i.e. in case where
/sys/bus/rbd/supported_features is absent and we are unable to prepare
the krbd attributes based on kernel version.
When krbdFeatures is set to zero fallback to NBD only when autofallback
is turned ON.
Fixes: #2678
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Upstream /sys/bus/rbd/supported_features is part of Linux kernel v4.11.0
Prepare the attributes and use them in case if
/sys/bus/rbd/supported_features is missing.
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Move k8s.GetVolumeMetadata() out of setVolumeMetadata() and rename it to
setAllMetadata() so that the same can be used for setting volume and
snapshot metadata.
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
There is not much the NFS-provisioner needs to do to expand a volume,
everything is handled by the CephFS components.
NFS does not need a resize on the node, so only ControllerExpandVolume
is required.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
For the default mounter the mounter option
will not be set in the storageclass and as it is
not available in the storageclass same will not
be set in the volume context, Because of this the
mapOptions are getting discarded. If the mounter
is not set assuming it's an rbd mounter.
Note:- If the mounter is not set in the storageclass
we can set it in the volume context explicitly,
Doing this check-in node server to support backward
existing volumes and the check is minimal we are not
altering the volume context.
fixes: #3076
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
With cgroup v2, the location of the pids.max file changed and so did the
/proc/self/cgroup file
new /proc/self/cgroup file
`
0::/user.slice/user-500.slice/session-14.scope
`
old file:
`
11:pids:/user.slice/user-500.slice/session-2.scope
10:blkio:/user.slice
9:net_cls,net_prio:/
8:perf_event:/
...
`
There is no directory per subsystem (e.g. /sys/fs/cgroup/pids) any more, all
files are now in one directory.
fixes: https://github.com/ceph/ceph-csi/issues/3085
Signed-off-by: Marcus Röder <m.roeder@yieldlab.de>
This commit makes modification so as to allow pvc-pvc clone
with different storageclass having different encryption
configs.
This commit also modifies `copyEncryptionConfig()` to
include a `isEncrypted()` check within the function.
Signed-off-by: Rakshith R <rar@redhat.com>
Before the change, the error msg was the following:
```
failed to set VAULT_AUTH_MOUNT_PATH in Vault config: path is empty
```
`vaultAuthPath` is the actual variable name set by the
user. The error message will now be the following:
```
failed to set "vaultAuthPath" in vault config: path is empty
```
Signed-off-by: Rakshith R <rar@redhat.com>
In case the NFS-export has already been removed from the NFS-server, but
the CSI Controller was restarted, a retry to remove the NFS-volume will
fail with an error like:
> GRPC error: ....: response status not empty: "Export does not exist"
When this error is reported, assume the NFS-export was already removed
from the NFS-server configuration, and continue with deleting the
backend volume.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
as same host directory is not shared between
the cephfs and the rbd plugin pod. we need
to keep the netNamespaceFilePath separately
for both cephfs and rbd. CephFS plugin will
use this path to execute mount -t commands.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
As radosNamespace is more specific to
RBD not the general ceph configuration. Now
we introduced a new RBD section for RBD specific
options, Moving the radosNamespace to RBD section
and keeping the radosNamespace still under the
global ceph level configration for backward
compatibility.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
As the netNamespaceFilePath can be separate for
both cephfs and rbd adding the netNamespaceFilePath
path for RBD, This will help us to keep RBD and
CephFS specific options separately.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
The NFS Controller returns a non-gRPC error in case the CreateVolume
call for the CephFS volume fails. It is better to return the gRPC-error
that the CephFS Controller passed along.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
