add support to run rbd map and mount -t
commands with the nsenter.
complete design of pod/multus network
is added here https://github.com/rook/rook/
blob/master/design/ceph/multus-network.md#csi-pods
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Currently we only check if the rbd-nbd tool supports cookie feature.
This change will also defend cookie addition based on kernel version
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Increase the timeout to 2 minutes to give enough time
for rollback to complete.
As rollback is performed by the force-promote command it,
at times, may take more than a minute
(based on dirty blocks that need to be rolled
back approximately) to rollback.
The added extra 1 minute is useful though to avoid
multiple calls to complete the rollback and in
extremely corner cases to avoid failures in the
first instance of the call when the mirror watcher
is not yet removed (post scaling down the
RBD mirror instance)
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Restoring a snapshot with a new PVC results with a wrong
dataPoolName in case of initial volume linked
to a storageClass with topology constraints and erasure coding.
Signed-off-by: Thibaut Blanchard <thibaut.blanchard@gmail.com>
Below are the 3 different cases where we need
the PVC namespace for encryption
* CreateVolume:- Read the namespace from the
createVolume parameters and store it in the omap
* NodeStage:- Read the namespace from the omap
not from the volumeContext
* Regenerate:- Read the pvc namespace from the claimRef
not from the volumeAttributes.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
remove kubernetes csi prefixed parameters
from the volumeContext as we dont want
to store it in the PV VolumeAttributes.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
This commit ensures that parent image is flattened before
creating volume.
- If the data source is a PVC, the underlying image's parent
is flattened(which would be a temp clone or snapshot).
hard & soft limit is reduced by 2 to account for depth that
will be added by temp & final clone.
- If the data source is a Snapshot, the underlying image is
itself flattened.
hard & soft limit is reduced by 1 to account for depth that
will be added by the clone which will be restored from the
snapshot.
Flattening step for resulting PVC image restored from snapshot is removed.
Flattening step for temp clone & final image is removed when pvc clone is
being created.
Fixes: #2190
Signed-off-by: Rakshith R <rar@redhat.com>
Currently, we support
mapOption: "krbd:v1,v2,v3;nbd:v1,v2,v3"
- By omitting `krbd:` or `nbd:`, the option(s) apply to
rbdDefaultMounter which is krbd.
- A user can _override_ the options for a mounter by specifying `krbd:`
or `nbd:`.
mapOption: "v1,v2,v3;nbd:v1,v2,v3"
is effectively the same as the 1st example.
- Sections are split by `;`.
- If users want to specify common options for both `krbd` and `nbd`,
they should mention them twice.
But in case if the krbd or nbd specifc options contian `:` within them,
then the parsing is failing now.
E0301 10:19:13.615111 7348 utils.go:200] ID: 63 Req-ID:
0001-0009-rook-ceph-0000000000000001-fd37c41b-9948-11ec-ad32-0242ac110004
GRPC error: badly formatted map/unmap options:
"krbd:read_from_replica=localize,crush_location=zone:zone1;"
This patch fix the above case where the options itself contain `:`
delimitor
ex: krbd:v1,v2,v3=v31:v32;nbd:v1,v2,v3"
Please note, if you are using such options which contain `:` delimiter,
then it is mandatory to specify the mounter-type.
Fixes: #2910
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Makes the rbd images features in the storageclass
as optional so that default image features of librbd
can be used. and also kept the option to user
to specify the image features in the storageclass.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
as deep-flatten is long supported in ceph and its
enabled by default in the librbd, providing an option
to enable it in cephcsi for the rbd images we are
creating.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
logging the error is not user-friendly and
it contains system error message. Log the
stderr which is user-friendly error message
for identifying the problem.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Return the dataPool used to create the image instead of the default one
provided by the createVolumeRequest.
In case of topologyConstrainedDataPools, they may differ.
Don't add datapool if it's not present
Signed-off-by: Sébastien Bernard <sebastien.bernard@sfr.com>
This commit removes the thick provisioning
code as thick provisioning is deprecated in
cephcsi 3.5.0.
fixes: #2795
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
currently we are overriding the permission to `0o777` at time of node
stage which is not the correct action. That said, this permission
change causes an extra permission correction at time of nodestaging
by the CO while the FSGROUP change policy has been set to
`OnRootMismatch`.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
as ioutil.ReadFile is deprecated and
suggestion is to use os.ReadFile as
per https://pkg.go.dev/io/ioutil updating
the same.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
as ioutil.WriteFile is deprecated and
suggestion is to use os.WriteFile as
per https://pkg.go.dev/io/ioutil updating
the same.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Currently most of the internal methods have the
rbdVolume as the received. As these methods
are completely internal and requires only
the fields of the rbdImage use rbdImage
as the receiver instead of rbdVolume.
updates #2742
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
as per the CSI standard the size is optional parameter,
as we are allowing the clone to a bigger size
today we need to block the clone to a smaller size
as its a have side effects like data corruption etc.
Note:- Even though this check is present in kubernetes
sidecar as CSI is CO independent adding the check
here.
updates: #2718
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
as per the CSI standard the size is optional parameter,
as we are allowing the restore to a bigger size
today we need to block the restore to a smaller size
as its a have side effects like data corruption.
Note:- Even though this check is present in kubernetes
sidecar as CSI is CO independent adding the check
here.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
SINGLE_NODE_WRITER capability ambiguity has been fixed in csi spec v1.5
which allows the SP drivers to declare more granular WRITE capability in form
of SINGLE_NODE_SINGLE_WRITER or SINGLE_NODE_MULTI_WRITER.
These are not really new capabilities rather capabilities introduced to
get the desired functionality from CO side based on the capabilities SP
driver support for various CSI operations, this new capabilities also help
to address new access mode RWOP (readwriteoncepod).
This commit adds a helper function which identity the request is of
multiwriter mode and also validates whether it is filesystem mode or
block mode. Based on the inspection it fails to allow multi write
requests for filesystem mode and only allow multi write request against
block mode.
This commit also adds unit tests for isMultiWriterBlock function which
validates various accesstypes and accessmodes.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
This commit removes rbdVol.getTrashPath() function
since it is no longer being used due to introduction
of go-ceph rbd admin task api for deletion.
Signed-off-by: Rakshith R <rar@redhat.com>
With introduction of go-ceph rbd admin task api, credentials are
no longer required to be passed as cli cmd is not invoked.
Signed-off-by: Rakshith R <rar@redhat.com>
This commit removes `rv.Connect(cr)` since the rbdVolume should
have an active connection in this stage of the function call.
`rv.getCloneDepth(ctx)` will work after a connect to the cluster.
Signed-off-by: Rakshith R <rar@redhat.com>
This commit adds support to go-ceph rbd task api
`trash remove` and `flatten` instead of using cli
cmds.
Fixes: #2186
Signed-off-by: Rakshith R <rar@redhat.com>
The CSI Controller (provisioner) can call `rbd sparsify` to reduce the
space consumption of the volume.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
use ExecCommandWithTimeout with timeout
of 1 minute for the promote operation.
If the command doesnot returns error/response
in 1 minute the process will be killed
and error will be returned to the user.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
after creating the rbd image log the image
details corresponding for the request along
with the request name.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
as getImageInfo is already called inside
cloneRbdImageFromSnapshot function right
after creating the clone. remove the extra
API call to get the details again.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
after creating the clone get the current
image details like size, creationTime,
imageFeatures etc from the ceph cluster.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
moved ParentName, ParentPool and ImageFeatureSet
fields to the rbdImage struct as these are the
first citizens on the rbdImage.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
If the volume with a bigger size is created
from a snapshot or from another volume we
need to exapand the filesystem also in the
csidriver as nodeExpand request is not triggered
for this one, During NodeStageVolume we can
expand the filesystem by checking filesystem
needs expansion or not.
If its a encrypted device, check the device
size of rbd device and the LUKS device if required
the device will be expanded before
expanding the filesystem.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
If the requested volume size is greater than
the snapshot size, resize the cloned volume
after creating a clone from a snapshot.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
If the requested volume size is greater than
the parent volume size, resize the cloned volume
after creating a final clone from a parent volume.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
added a check to consider ErrImageNotFound error
during DeleteSnapshot operation, if the error
is ErrImageNotFound we need to ensure that image
is removed from the trash and also the rados
OMAP data is removed.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
we need actual size of the rbdVolume
created for the snapshot, as we are not
storing the size of the snapshot in OMAP
we need to fetch the size from ceph cluster
and update the same on rbdSnapshot struct.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
as we are moving the VolSize to rbdImage struct
we should reuse the same instead of maintaining
one more field in rbdSnapshot struct.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
move the Volsize to the rbdImage struct
as size is more applicable for rbdImage
as rbdImage is used for both rbdVolume
and rbdSnapshot.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
as we are no longer supporting the v1.x
version of cephcsi. removing the json tag
used to store rbd volume details in configmap.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
when doing the internal operation to get the
latest details the rbd image size is also getting
updated and this will update the volume size also
without actual requested size we cannot do the
resize operation for bigger clones. This commit
adds a new field called RequestedVolSize to rbdVolume
struct to hold the user requested size.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
added a new helper function called cleanupThickClone
to cleanup the snapshot and clone if the thick
provisioning is not fully completed.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
remove the bigger size validation when
creating a volume from a snapshot or when
creation a clone from a volume as we resized
the volume after cloning.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
