Added step to identify alpha snapshot CRD.
Added step to delete alpha CRD and link
for installing beta CRD.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Earlier we were running all the linter for non-go
files in one short, this wont be helpful for the
users who want to run particular tests.
now the Makefile as different target to
run separate lint test for different type
of non-go files.
Fixes: #979
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
By using switch/case it is easier to follow the error checking of the
genVolFromVolID() function. In case a new error is added as a return of
the function, it will be simpler to add checking for it.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
The commitlint CI job uses the configuration from .commitlintrc.yaml
which contains the different components that Ceph-CSI uses. A short
description of each component has been added, so that contributors
understand what component to mention in the prefix of the subject in
commit messages.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
The SetNamespace setter function was called only once, immediately after
the creation of a volume journal object in cephfs only.
Remove this function so that it is no longer implied that this field can
be mutated after the journal is created. In it's place, use an extended
"constructor" NewCSIVolumeJournalWithNamespace that takes a namespace
value at create-time only.
Signed-off-by: John Mulligan <jmulligan@redhat.com>
unlike other containers, image pull policy of
csi-snapshotter was set to "Always", which can
be changed to pull only if not present.
Signed-off-by: Yug Gupta <ygupta@redhat.com>
The function SetCSIDirectorySuffix was used only one per (long-lived,
gloabl) journal object. It is simpler to construct the journal objects
with this needed parameter:
1. As it is required to function and non-optional AFAICT
2. Removes the temptation to mutate global object
3. Reduces LOC with exact same functionality
4. SetCSIDirectorySuffix would not behave correctly if called a 2nd time
anyway.
Point 4. means that if you called the function twice to change the
suffix when you previously had "csi.volumes.alice", you'd get
"csi.volumes.alice.bob" instead of "csi.volumes.bob" what one would
expect.
Signed-off-by: John Mulligan <jmulligan@redhat.com>
Version 1.18.x is currently out, and the k8s community does not maintain
versions 1.14 and 1.15 anymore. No need to test on versions that users
should not deploy.
Fixes: #1023
Signed-off-by: Niels de Vos <ndevos@redhat.com>
This configuration enforces the format of commits that are part of a
Pull Request. The title of the PR can be checked as well, that will not
be required for now.
The format of a subject of all commit messages needs to be:
<component>: <description>
For example:
ci: add configuration for "Semantic Pull Request" bot
The valid components in the commit message are listed in the
.github/semantic.yaml file as 'types'.
See-also: https://github.com/zeke/semantic-pull-requests#semantic-pull-requests
See-also: https://www.conventionalcommits.org
Signed-off-by: Niels de Vos <ndevos@redhat.com>
The rules are defined here which could enable stale bot.
Additional Ref# https://probot.github.io/apps/stale/
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
Added document on the standard user need to follow
when writting the commit message and to include
sign-off in commit message.
source: https://probot.github.io/apps/dco/
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Updated golang version to 1.13.x and
also updated user to set GO111MODULE=on
and CGO_ENABLED=1 when doing development
in cephcsi
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
The problem happens when multiple PVCs with the
same UUID are attached/mounted on a node. This
can happen after creating a PVC from a snapshot,
or cloning a PVC.
make nouuid as the default mount option if
the format type is xfs to avoid mounting
issues.
updates: #966
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
The gocyclo linter complains about the high complexity of the
CreateVolume() function:
> pkg/rbd/controllerserver.go:133:1: cyclomatic complexity 21 of func `(*ControllerServer).CreateVolume` is high (> 20) (gocyclo)
By splitting it up and separeting the creation of an exisint CSI Volume
object in buildCreateVolumeResponse(), the gocyclic linter does not
complain any longer.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
golint has a pretty struct stylechek, it down not allow different
variable names for methods on an object:
pkg/rbd/rbd_util.go:970:1: receiver name rbdVol should be consistent with previous receiver name rv for rbdVolume (golint)
func (rbdVol *rbdVolume) ensureEncryptionMetadataSet(ctx context.Context) error {
^
pkg/rbd/rbd_journal.go:166:26: ST1016: methods on the same type should have the same receiver name (seen 2x "rbdVol", 3x "rv") (stylecheck)
func (rbdVol *rbdVolume) Exists(ctx context.Context) (bool, error) {
^
Rename the 'rbdVol' variable to 'rv' to make it consistent.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
rbdVolume.open() was split from commit 5dd34732e1e while moving part of
the functionality to util.ClusterConnection. It seems that .open() is
not used anywhere at the moment, so drop it until follow-up patches
require it again.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
The shared util.ClusterConnection can be used for rbd.rbdVolume and
cephfs.volumeOptions to connect to the Ceph cluster. This will then use
the shared ConnPool, and functions for obtaining connection details will
be the same across cephfs and rbd packages.
The ClusterConnection.Creds credentials are temporarily available until
all the functions have been adapted to use go-ceph and the connection
from the ConnPool.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
The name of the CephFS SubvolumeGroup for the CSI volumes was hardcoded to "csi". To make permission management in multi tenancy environments easier, this commit makes it possible to configure the CSI SubvolumeGroup.
related to #798 and #931
golint warns about the following statements:
ceph-csi/internal/util/csiconfig.go
Line 49: warning: exported function Mons should have comment or be unexported (golint)
ceph-csi/pkg/util/volid.go :
Line 72: warning: exported method CSIIdentifier.ComposeCSIID should have comment
or be unexported (golint)
Reported-by: https://goreportcard.com/report/github.com/ceph/ceph-csi
Updates: #975
Signed-off-by: Yug Gupta <ygupta@redhat.com>
The `deploy:` section is executed as part of each successful job. That
means the container images and Helm charts are built and pushed many
times during testing after a push/merge event.
By creating a deploy stage and listing it after the tests, it is
guaranteed to run only once after all tests have succeeded. By adding a
condition to only run the stage for push events, the images and Helm
charts should only get built+pushed after a PR has been merged.
See-also: https://docs.travis-ci.com/user/conditional-builds-stages-jobs#Specifying-conditions
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Instead of creating the tmp directory in
ceph-csi create temp directory outside
and use it to push helm charts
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
With extra logging, there is no need to call `travis_wait` anymore. In
addition the `travis_wait` command blocks output, so the build steps are
not reported until the script finishes.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
By repeated logging of the current step, Travis CI should receive some
terminal activity and is expected to not timeout anymore.
Fixes: #982
Signed-off-by: Niels de Vos <ndevos@redhat.com>
While introducing scripts/build_step.inc.sh the tests start to fail as
the script is included and each shell script is tested separately. By
adding the option --external-sources to shellcheck, the related warnings
are not reported.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
If Docker does not exist, use Podman.
Use all CPUs for the build, which hopefully will make it faster.
Signed-off-by: Yaniv Kaul <ykaul@redhat.com>
Fixes: #987
