The Key Management Interoperability Protocol (KMIP)
is an extensible communication protocol
that defines message formats for the manipulation
of cryptographic keys on a key management server.
Ceph-CSI can now be configured to connect to
various KMS using KMIP for encrypting RBD volumes.
https://en.wikipedia.org/wiki/Key_Management_Interoperability_Protocol
Signed-off-by: Rakshith R <rar@redhat.com>
getting is unused for linter "staticcheck"
(nolintlint) error message due to wrong
comment format. this the format now with
`//directive // comment`
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
This commit cleans up for loop to use index to access
value instead of copying value into a new variable
while iterating.
```
internal/util/csiconfig.go:103:2: rangeValCopy: each \
iteration copies 136 bytes (consider pointers or indexing) \
(gocritic)
for _, cluster := range config {
```
Signed-off-by: Rakshith R <rar@redhat.com>
This commit adds nfs nodeserver capable of
mounting nfs volumes, even with pod networking
using NSenter design similar to rbd and cephfs.
NodePublish, NodeUnpublish, NodeGetVolumeStats
and NodeGetCapabilities have been implemented.
The nodeserver implementation has been inspired
from https://github.com/kubernetes-csi/csi-driver-nfs,
which was previously used for mounted cephcsi exported
nfs volumes. The current implementation is also
backward compatible for the previously created
PVCs.
Signed-off-by: Rakshith R <rar@redhat.com>
Current code uses an !A && !B condition incorrectly to
test A:Up and B:status for a remote peer image.
This should be !A || !B as we require both conditions to
be in the specified state (Up: true, and status Unknown).
This is corrected by this commit, and further fixes:
- check and return ready only when a remote site is
found in the status output
- check if all peer sites are ready, if multiple are found
and return ready appropriately
Signed-off-by: Shyamsundar Ranganathan <srangana@redhat.com>
During ResyncVolume we check if the image
is in an error state, and we resync.
After resync, the image will move to
either the `Error` or the `Resyncing` state.
And if the image is in the above two
conditions, we will return a successful
response and Ready=false so that the
consumer can wait until the volume is
ready to use. If the image is in any
other state we return an error message
to indicate the syncing is not going on.
The whole resync and image state change
depends on the rbd mirror daemon. If the
mirror daemon is not running, the image
can be in Resyncing or Unknown state.
The Ramen marks the volume replication as
secondary, and once the resync starts, it
will delete the volume replication CR as a
cleanup process.
As we dont have a check for the rbd mirror
daemon, we are returning a resync success
response and Ready=false. Due to this false
response Ramen is assuming the resync started
and deleted the volume replication CR, and
because of this, the cluster goes into a bad
state and needs manual intervention.
fixes#3289
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
IsNotMountPoint() is deprecated and Mounter.IsMountPoint() is
recommended to be used instead.
Reported-by: golangci/staticcheck
Signed-off-by: Niels de Vos <ndevos@redhat.com>
NewWithoutSystemd() has been introduced in the k8s.io/mount-utils
package so that systemd is not called while executing functions. This
offers consumers the ability to prevent confusing and scary messages
from getting logged.
See-also: kubernetes/kubernetes#111218
Signed-off-by: Niels de Vos <ndevos@redhat.com>
previously, it was a requirement to have attacher sidecar for CSI
drivers and there had an implementation of dummy mode of operation.
However skipAttach implementation has been stabilized and the dummy
mode of operation is going to be removed from the external-attacher.
Considering this driver work on volumeattachment objects for NBD driver
use cases, we have to implement dummy controllerpublish and unpublish
and thus keep supporting our operations even in absence of dummy mode
of operation in the sidecar.
This commit make a NOOP controller publish and unpublish for RBD driver.
CephFS driver does not require attacher and it has already been made free
from the attachment operations.
Ref# https://github.com/ceph/ceph-csi/pull/3149
Ref# https://github.com/kubernetes-csi/external-attacher/issues/226
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
`--setmetadata` is false by default, honoring it
will keep the metadata disabled by default
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
`--setmetadata` is false by default, honoring it
will keep the metadata disabled by default
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Make sure to set metadata when subvolume snapshot exist, i.e. if the
provisioner pod is restarted while createSnapShot is in progress, say it
created the subvolume snapshot but didn't yet set the metadata.
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Set snapshot-name/snapshot-namespace/snapshotcontent-name details
on subvolume snapshots as metadata on create.
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
This change helps read the cluster name from the cmdline args,
the provisioner will set the same on the subvolume.
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Make sure to set metadata when subvolume exist, i.e. if the provisioner pod
is restarted while createVolume is in progress, say it created the subvolume
but didn't yet set the metadata.
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
This helps Monitoring solutions without access to Kubernetes clusters to
display the details of the PV/PVC/NameSpace in their dashboard.
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
After Failover of workloads to the secondary
cluster when the primary cluster is down,
RBD Image is not marked healthy, and VR
resources are not promoted to the Primary,
In VolumeReplication, the `CURRENT STATE`
remains Unknown and doesn't change to Primary.
This happens because the primary cluster went down,
and we have force promoted the image on the
secondary cluster. and the image stays in
up+stopping_replay or could be any other states.
Currently assumption was that the image will
always be `up+stopped`. But the image will be in
`up+stopped` only for planned failover and it
could be in any other state if its a forced
failover. For this reason, removing
checkHealthyPrimary from the PromoteVolume RPC call.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Recently the k8s.io/mount-utils package added more runtime dectection.
When creating a new Mounter, the detect is run every time. This is
unfortunate, as it logs a message like the following:
```
mount_linux.go:283] Detected umount with safe 'not mounted' behavior
```
This message might be useful, so it probably good to keep it.
In Ceph-CSI there are various locations where Mounter instances are
created. Moving that to the DefaultNodeServer type reduces it to a
single place. Some utility functions need to accept the additional
parameter too, so that has been modified as well.
See-also: kubernetes/kubernetes#109676
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Looks like cephfs snapshot size is buggy and its
getting removed in ceph fs. we cannot get the size
of the snapshot during CreateVolume call, so we cannot
do any size check at CreateVolume to check if the
restore size is smaller or not.
As we are removing this check it also fixes#3147
but we dont have any validation at CSI level for
smaller restore we need to depend on kubernetes
external-provisioner for it.
fixes: #3147
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Due to the bug in the df stat we need to round off
the subvolume size to align with 4Mib.
Note:- Minimum supported size in cephcsi is 1Mib,
we dont need to take care of Kib.
fixes#3240
More details at https://github.com/ceph/ceph/pull/46905
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
While creating subvolumes, CephFS driver set the mode to `777`
and pass it along to go ceph apis which cause the subvolume
permission to be on 777, however if we create a subvolume
directly in the ceph cluster, the default permission bits are
set which is 755 for the subvolume. This commit try to stick
to the default behaviour even while creating the subvolume.
This also means that we can work with fsgrouppolicy set to
`File` in csiDriver object which is also addressed in this commit.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
When the Ceph user is restricted to a specific namespace in the pool, it is
crucial that evey interaction with the cluster is done within that namespace.
This wasn't the case in `getCloneDepth()`.
This issue was causing snapshot creation to fail with
> Failed to check and update snapshot content: failed to take snapshot of the
> volume X: "rpc error: code = Internal desc = rbd: ret=-1, Operation not
> permitted"
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
There are regular reports that identify a non-error as the cause of
failures. The Kubernetes mount-utils package has detection for systemd
based environments, and if systemd is unavailable, the following error
is logged:
Cannot run systemd-run, assuming non-systemd OS
systemd-run output: System has not been booted with systemd as init
system (PID 1). Can't operate.
Failed to create bus connection: Host is down, failed with: exit status 1
Because of the `failed` and `exit status 1` error message, users might
assume that the mounting failed. This does not need to be the case. The
container-images that the Ceph-CSI projects provides, do not use
systemd, so the error will get logged with each mount attempt.
By using the newer MountSensitiveWithoutSystemd() function from the
mount-utils package where we can, the number of confusing logs get
reduced.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
go-ceph provides a new GetFailure() method to retrieve details errors
when cloning failed. This is now included in the `cephFSCloneState`
struct, which was a simple string before.
While modifying the `cephFSCloneState` struct, the constants have been
removed, as go-ceph provides them as well.
Fixes: #3140
Signed-off-by: Niels de Vos <ndevos@redhat.com>
This commit removes the clone incase
unsetAllMetadata or copyEncryptionConfig or
expand fails for createVolumeFromSnapshot
and CreateSnapshot.
It also removes the clone in case of
any failure in createCloneFromImage.
issue: #3103
Signed-off-by: Yati Padia <ypadia@redhat.com>
Address: hugeParam linter
internal/controller/persistentvolume/persistentvolume.go:59:7:
hugeParam: r is heavy (80 bytes); consider passing it by pointer
(gocritic)
[...]
internal/controller/persistentvolume/persistentvolume.go:135:7:
hugeParam: r is heavy (80 bytes); consider passing it by pointer
(gocritic)
func (r ReconcilePersistentVolume) reconcilePV(ctx context.Context, obj
runtime.Object) error {}
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
As we added support to set the metadata on the rbd images created for
the PVC and volume snapshot, by default metadata is set on all the images.
As we have seen we are hitting issues#2327 a lot of times with this,
we start to leave a lot of stale images. Currently, we rely on
`--extra-create-metadata=true` to decide to set the metadata or not,
we cannot set this option to false to disable setting metadata because we
use this for encryption too.
This changes is to provide an option to disable setting the image
metadata when starting cephcsi.
Fixes: #3009
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Removed the code in checkHealthyPrimary which
makes the ceph call, passing it as input now.
Added unit test for checkHealthyPrimary function
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
we need to check for image should be in up+stopped state
not anyone of the state for that the we need to use
OR check not the AND check.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
When the image is force promoted to primary on the
cluster the remote image might not be in replaying
state because due to the split brain state. This
PR reverts back the commit
c3c87f2ef3. Which we added
to check the remote image status.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Kubernetes 1.24 and newer use a different path for staging the volume.
That means the CSI-driver is requested to mount the volume at an other
location, compared to previous versions of Kubernetes. CSI-drivers
implementing the volumeHealer, must receive the correct path, otherwise
the after a nodeplugin restart the NBD mounts will bailout attempting
to NodeStageVolume() call and return an error.
See-also: kubernetes/kubernetes#107065
Fixes: #3176
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
During failover we do demote the volume on the primary
as the image is still not promoted yet on the remote cluster,
there are spurious split-brain errors reported by RBD,
the Cephcsi resync will attempt to resync from the "known"
secondary and that will cause data loss
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
create the token if kubernetes version in
1.24+ and use it for vault sa.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Signed-off-by: Rakshith R <rar@redhat.com>
This commit implements most of
docs/design/proposals/cephfs-snapshot-shallow-ro-vol.md design document;
specifically (de-)provisioning of snapshot-backed volumes, mounting such
volumes as well as mounting pre-provisioned snapshot-backed volumes.
Signed-off-by: Robert Vasek <robert.vasek@cern.ch>
RBD supports creating rbd images with
object size, stripe unit and stripe count
to support striping. This PR adds the support
for the same.
More details about striping at
https://docs.ceph.com/en/quincy/man/8/rbd/#stripingfixes: #3124
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
This change helps read the cluster name from the cmdline args,
the provisioner will set the same on the RBD images.
Fixes: #2973
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
In case of pre-provisioned volume the clusterID is
not set in the volume context as the clusterID is missing
we cannot extract the NetNamespaceFilePath from the
configuration file. For static volume and dynamically
provisioned volume the clusterID is set.
Note:- This is a special case to support mounting PV
without clusterID parameter.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Before the change, the error msg was the following:
```
failed to set VAULT_AUTH_MOUNT_PATH in Vault config: path is empty
```
`vaultAuthPath` is the actual variable name set by the
user. The error message will now be the following:
```
failed to set "vaultAuthPath" in vault config: path is empty
```
Signed-off-by: Rakshith R <rar@redhat.com>
This commit adds support for pvc-pvc clone.
Only capability needed to be advertised, the
underlying support is already provided by cephfs
backend.
Signed-off-by: Rakshith R <rar@redhat.com>
continue running rbd driver when /sys/bus/rbd/supported_features file is
missing, do not bailout.
Fixes: #2678
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
krbdFeatures is set to zero when kernel version < 3.8, i.e. in case where
/sys/bus/rbd/supported_features is absent and we are unable to prepare
the krbd attributes based on kernel version.
When krbdFeatures is set to zero fallback to NBD only when autofallback
is turned ON.
Fixes: #2678
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Upstream /sys/bus/rbd/supported_features is part of Linux kernel v4.11.0
Prepare the attributes and use them in case if
/sys/bus/rbd/supported_features is missing.
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Move k8s.GetVolumeMetadata() out of setVolumeMetadata() and rename it to
setAllMetadata() so that the same can be used for setting volume and
snapshot metadata.
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
There is not much the NFS-provisioner needs to do to expand a volume,
everything is handled by the CephFS components.
NFS does not need a resize on the node, so only ControllerExpandVolume
is required.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
For the default mounter the mounter option
will not be set in the storageclass and as it is
not available in the storageclass same will not
be set in the volume context, Because of this the
mapOptions are getting discarded. If the mounter
is not set assuming it's an rbd mounter.
Note:- If the mounter is not set in the storageclass
we can set it in the volume context explicitly,
Doing this check-in node server to support backward
existing volumes and the check is minimal we are not
altering the volume context.
fixes: #3076
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
With cgroup v2, the location of the pids.max file changed and so did the
/proc/self/cgroup file
new /proc/self/cgroup file
`
0::/user.slice/user-500.slice/session-14.scope
`
old file:
`
11:pids:/user.slice/user-500.slice/session-2.scope
10:blkio:/user.slice
9:net_cls,net_prio:/
8:perf_event:/
...
`
There is no directory per subsystem (e.g. /sys/fs/cgroup/pids) any more, all
files are now in one directory.
fixes: https://github.com/ceph/ceph-csi/issues/3085
Signed-off-by: Marcus Röder <m.roeder@yieldlab.de>
This commit makes modification so as to allow pvc-pvc clone
with different storageclass having different encryption
configs.
This commit also modifies `copyEncryptionConfig()` to
include a `isEncrypted()` check within the function.
Signed-off-by: Rakshith R <rar@redhat.com>
Before the change, the error msg was the following:
```
failed to set VAULT_AUTH_MOUNT_PATH in Vault config: path is empty
```
`vaultAuthPath` is the actual variable name set by the
user. The error message will now be the following:
```
failed to set "vaultAuthPath" in vault config: path is empty
```
Signed-off-by: Rakshith R <rar@redhat.com>
In case the NFS-export has already been removed from the NFS-server, but
the CSI Controller was restarted, a retry to remove the NFS-volume will
fail with an error like:
> GRPC error: ....: response status not empty: "Export does not exist"
When this error is reported, assume the NFS-export was already removed
from the NFS-server configuration, and continue with deleting the
backend volume.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
as same host directory is not shared between
the cephfs and the rbd plugin pod. we need
to keep the netNamespaceFilePath separately
for both cephfs and rbd. CephFS plugin will
use this path to execute mount -t commands.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
As radosNamespace is more specific to
RBD not the general ceph configuration. Now
we introduced a new RBD section for RBD specific
options, Moving the radosNamespace to RBD section
and keeping the radosNamespace still under the
global ceph level configration for backward
compatibility.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
As the netNamespaceFilePath can be separate for
both cephfs and rbd adding the netNamespaceFilePath
path for RBD, This will help us to keep RBD and
CephFS specific options separately.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
The NFS Controller returns a non-gRPC error in case the CreateVolume
call for the CephFS volume fails. It is better to return the gRPC-error
that the CephFS Controller passed along.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Recent versions of Ceph allow calling the NFS-export management
functions over the go-ceph API.
This seems incompatible with older versions that have been tested with
the `ceph nfs` commands that this commit replaces.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
use leases for leader election instead
of the deprecated configmap based leader
election.
This PR is making leases as default leader election
refer https://github.com/kubernetes-sigs/
controller-runtime/pull/1773, default from configmap
to configmap leases was done with
https://github.com/kubernetes-sigs/
controller-runtime/pull/1144.
Release notes https://github.com/kubernetes-sigs/
controller-runtime/releases/tag/v0.7.0
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
To consider the image is healthy during the Promote
operation currently we are checking only the image
state on the primary site. If the network is flaky
or the remote site is down the image health is
not as expected. To make sure the image is healthy
across the clusters check the state on both local
and the remote clusters.
some details:
https://bugzilla.redhat.com/show_bug.cgi?id=2014495
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
calling setRbdNbdToolFeatures inside an init
gets called in main.go for both cephfs and rbd
driver. instead of calling it in init function
calling this in rbd driver.go as this is specific
to rbd.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Set snapshot-name/snapshot-namespace/snapshotcontent-name details
on RBD backend snapshot image as metadata on snapshot
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Make sure to set metadata when image exist, i.e. if the provisioner pod
is restarted while createVolume is in progress, say it created the image
but didn't yet set the metadata.
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Example if a PVC was delete by setting `persistentVolumeReclaimPolicy` as
`Retain` on PV, and PV is reattached to a new PVC, we make sure to update
PV/PVC image metadata on a PV reattach.
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
This helps Monitoring solutions without access to Kubernetes clusters to
display the details of the PV/PVC/NameSpace in their dashboard.
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Define and use PV and PVC metadata keys used by external provisioner.
The CSI external-provisioner (v1.6.0+) introduces the
--extra-create-metadata flag, which automatically sets map<string, string>
parameters in the CSI CreateVolumeRequest.
Add utility functions to set/Get PV/PVC/PVCNamespace metadata on image
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
add support to run rbd map and mount -t
commands with the nsenter.
complete design of pod/multus network
is added here https://github.com/rook/rook/
blob/master/design/ceph/multus-network.md#csi-pods
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Currently we only check if the rbd-nbd tool supports cookie feature.
This change will also defend cookie addition based on kernel version
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
The omap is stored with the requested
snapshot name not with the subvolume
snapshotname. This fix uses the correct
snapshot request name to cleanup the omap
once the subvolume snapshot is deleted.
fixes: #2974
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
The `ceph nfs export ...` commands have changed in recent Ceph releases.
Use the most recent command as a default, fall back to the older command
when an error is reported.
This shoud make the NFS-provisioner work on any current Ceph version.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Increase the timeout to 2 minutes to give enough time
for rollback to complete.
As rollback is performed by the force-promote command it,
at times, may take more than a minute
(based on dirty blocks that need to be rolled
back approximately) to rollback.
The added extra 1 minute is useful though to avoid
multiple calls to complete the rollback and in
extremely corner cases to avoid failures in the
first instance of the call when the mirror watcher
is not yet removed (post scaling down the
RBD mirror instance)
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Restoring a snapshot with a new PVC results with a wrong
dataPoolName in case of initial volume linked
to a storageClass with topology constraints and erasure coding.
Signed-off-by: Thibaut Blanchard <thibaut.blanchard@gmail.com>
NFSVolume instances are short lived, they only extist for a certain gRPC
procedure. It is easier to store the calling Context in the NFSVolume
struct, than to pass it to some of the functions that require it.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
These NFS Controller and Identity servers are the base for the new
provisioner. The functionality is currently extremely limited, follow-up
PRs will implement various CSI procedures.
CreateVolume is implemented with the bare minimum. This makes it
possible to create a volume, and mount it with the
kubernetes-csi/csi-driver-nfs NodePlugin.
DeleteVolume unexports the volume from the Ceph managed NFS-Ganesha
service. In case the Ceph cluster provides multiple NFS-Ganesha
deployments, things might not work as expected. This is going to be
addressed in follow-up improvements.
Lots of TODO comments need to be resolved before this can be declared
"production ready". Unit- and e2e-tests are missing as well.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
RT, reference tracker, is key-based implementation of a reference counter.
Unlike an integer-based counter, RT counts references by tracking unique
keys. This allows accounting in situations where idempotency must be
preserved. It guarantees there will be no duplicit increments or decrements
of the counter.
Signed-off-by: Robert Vasek <robert.vasek@cern.ch>
OIDC token file path has been modified from
`/var/run/secrets/token` to `/run/secrets/tokens`.
This has been done to ensure compliance with
FHS 3.0.
refer:
https://refspecs.linuxfoundation.org/FHS_3.0/fhs/ch05s13.html
Signed-off-by: Rakshith R <rar@redhat.com>
Below are the 3 different cases where we need
the PVC namespace for encryption
* CreateVolume:- Read the namespace from the
createVolume parameters and store it in the omap
* NodeStage:- Read the namespace from the omap
not from the volumeContext
* Regenerate:- Read the pvc namespace from the claimRef
not from the volumeAttributes.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
remove kubernetes csi prefixed parameters
from the volumeContext as we dont want
to store it in the PV VolumeAttributes.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
remove kubernetes csi prefixed parameters
from the volumeContext as we dont want
to store it in the PV VolumeAttributes.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
added helper function to strip the kubernetes
specific parameters from the volumeContext as
volumeContext is storaged in the PV volumeAttributes
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
This commit ensures that parent image is flattened before
creating volume.
- If the data source is a PVC, the underlying image's parent
is flattened(which would be a temp clone or snapshot).
hard & soft limit is reduced by 2 to account for depth that
will be added by temp & final clone.
- If the data source is a Snapshot, the underlying image is
itself flattened.
hard & soft limit is reduced by 1 to account for depth that
will be added by the clone which will be restored from the
snapshot.
Flattening step for resulting PVC image restored from snapshot is removed.
Flattening step for temp clone & final image is removed when pvc clone is
being created.
Fixes: #2190
Signed-off-by: Rakshith R <rar@redhat.com>
as per the CSI standard the size is optional parameter,
as we are allowing the clone to a bigger size
today we need to block the clone to a smaller size
as its a have side effects like data corruption etc.
Note:- Even though this check is present in kubernetes
sidecar as CSI is CO independent adding the check
here.
fixes: #2718
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
These RPCs( nodestage,unstage,volumestats) are
implemented RPCs for our drivers atm. This commit removes
the `unimplemented` responses from the common/default
server initialization routins.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
These RPCs ( controller expand, create and delete snapshots) are
no longer unimplmented and we dont have to declare these as with
`unimplemented` states. This commit remove the same.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
With Amazon STS and kubernetes cluster is configured with
OIDC identity provider, credentials to access Amazon KMS
can be fetched using oidc-token(serviceaccount token).
Each tenant/namespace needs to create a secret with aws region,
role and CMK ARN.
Ceph-CSI will assume the given role with oidc token and access
aws KMS, with given CMK to encrypt/decrypt DEK which will stored
in the image metdata.
Refer: https://docs.aws.amazon.com/STS/latest/APIReference/welcome.htmlResolves: #2879
Signed-off-by: Rakshith R <rar@redhat.com>
Currently, we support
mapOption: "krbd:v1,v2,v3;nbd:v1,v2,v3"
- By omitting `krbd:` or `nbd:`, the option(s) apply to
rbdDefaultMounter which is krbd.
- A user can _override_ the options for a mounter by specifying `krbd:`
or `nbd:`.
mapOption: "v1,v2,v3;nbd:v1,v2,v3"
is effectively the same as the 1st example.
- Sections are split by `;`.
- If users want to specify common options for both `krbd` and `nbd`,
they should mention them twice.
But in case if the krbd or nbd specifc options contian `:` within them,
then the parsing is failing now.
E0301 10:19:13.615111 7348 utils.go:200] ID: 63 Req-ID:
0001-0009-rook-ceph-0000000000000001-fd37c41b-9948-11ec-ad32-0242ac110004
GRPC error: badly formatted map/unmap options:
"krbd:read_from_replica=localize,crush_location=zone:zone1;"
This patch fix the above case where the options itself contain `:`
delimitor
ex: krbd:v1,v2,v3=v31:v32;nbd:v1,v2,v3"
Please note, if you are using such options which contain `:` delimiter,
then it is mandatory to specify the mounter-type.
Fixes: #2910
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Mounts managed by ceph-fuse may get corrupted by e.g. the ceph-fuse process
exiting abruptly, or its parent container being terminated, taking down its
child processes with it.
This commit adds checks to NodeStageVolume and NodePublishVolume procedures
to detect whether a mountpoint in staging_target_path and/or target_path is
corrupted, and remount is performed if corruption is detected.
Signed-off-by: Robert Vasek <robert.vasek@cern.ch>
Refactored a couple of helper functions for easier resue.
* Code for building store.VolumeOptions is factored out into a separate function.
* Changed args of getCredentailsForVolume() and NodeServer.mount() so that
instead of passing in whole csi.NodeStageVolumeRequest, only necessary
properties are passed explicitly. This is to allow these functions to be
called outside of NodeStageVolume() where NodeStageVolumeRequest is not
available.
Signed-off-by: Robert Vasek <robert.vasek@cern.ch>
blkdiscard cmd discards all data on the block device which
is not desired. Hence, return unimplemented code if the
volume access mode is block.
Signed-off-by: Rakshith R <rar@redhat.com>
When a tenant provides a configuration that includes the
`vaultNamespace` option, the `vaultAuthNamespace` option is still taken
from the global configuration. This is not wanted in all cases, as the
`vaultAuthNamespace` option defauls to the `vaultNamespace` option which
the tenant may want to override as well.
The following behaviour is now better defined:
1. no `vaultAuthNamespace` in the global configuration:
A tenant can override the `vaultNamespace` option and that will also
set the `vaultAuthNamespace` option to the same value.
2. `vaultAuthNamespace` and `vaultNamespace` in the global configuration:
When both options are set to different values in the global
configuration, the tenant `vaultNamespace` option will not override
the global `vaultAuthNamespace` option. The tenant can configure
`vaultAuthNamespace` with a different value if required.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Makes the rbd images features in the storageclass
as optional so that default image features of librbd
can be used. and also kept the option to user
to specify the image features in the storageclass.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
as deep-flatten is long supported in ceph and its
enabled by default in the librbd, providing an option
to enable it in cephcsi for the rbd images we are
creating.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
This commits refactors the cephfs core
functions with interfaces. This helps in
better code structuring and writing the
unit test cases.
update #852
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
logging the error is not user-friendly and
it contains system error message. Log the
stderr which is user-friendly error message
for identifying the problem.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Return the dataPool used to create the image instead of the default one
provided by the createVolumeRequest.
In case of topologyConstrainedDataPools, they may differ.
Don't add datapool if it's not present
Signed-off-by: Sébastien Bernard <sebastien.bernard@sfr.com>
At present we are node staging with worldwide permissions which is
not correct. We should allow the CO to take care of it and make
the decision. This commit also remove `fuseMountOptions` and
`KernelMountOptions` as they are no longer needed
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
the omap is stored with the requested
snapshot name not with the subvolume
snapshotname. This fix uses the correct
snapshot request name to cleanup the omap
once the subvolume snapshot is deleted.
fixes: #2832
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
This commit removes `kp-metadata` registration from existing HPCS
or Key Protect code as per the plan.
Fix#2816
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
As we are using optional additional auth data while wrapping
the DEK, we have to send the same additionally while unwrapping.
Error:
```
failed to unwrap the DEK: kp.Error: ..(INVALID_FIELD_ERR)',
reasons='[INVALID_FIELD_ERR: The field `ciphertext` must be: the
original base64 encoded ciphertext from the wrap operation
```
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
When a tenant configures `vaultNamespace` in their own ConfigMap, it is
not applied to the Vault configuration, unless `vaultAuthNamespace` is
set as well. This is unexpected, as the `vaultAuthNamespace` usually is
something configured globally, and not per tenant.
The `vaultAuthNamespace` is an advanced option, that is often not needed
to be configured. Only when tenants have to configure their own
`vaultNamespace`, it is possible that they need to use a different
`vaultAuthNamespace`. The default for the `vaultAuthNamespace` is now
the `vaultNamespace` value from the global configuration. Tenants can
still set it to something else in their own ConfigMap if needed.
Note that Hashicorp Vault Namespaces are only functional in the
Enterprise version of the product. Therefor this can not be tested in
the Ceph-CSI e2e with the Open Source version of Vault.
Fixes: https://bugzilla.redhat.com/2050056
Reported-by: Rachael George <rgeorge@redhat.com>
Signed-off-by: Niels de Vos <ndevos@redhat.com>
This commit removes the thick provisioning
code as thick provisioning is deprecated in
cephcsi 3.5.0.
fixes: #2795
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
At present the KMS structs are exported and ideally we should be
able to work without exporting the same.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
At present the KMS structs are exported and ideally we should be
able to work without exporting the same.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
Currently, we are using methods and all the methods
makes a network call to fetch details from the ceph
clusters, its difficult to write test cases for
these functions, if we move to the interfaces
we can make use of mock to write unit testing
for the caller functions.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
To be consistent with other components and also to explictly
state it belong to `ibm keyprotect` service introducing this
change
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
currently we are overriding the permission to `0o777` at time of node
stage which is not the correct action. That said, this permission
change causes an extra permission correction at time of nodestaging
by the CO while the FSGROUP change policy has been set to
`OnRootMismatch`.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
as ioutil.ReadFile is deprecated and
suggestion is to use os.ReadFile as
per https://pkg.go.dev/io/ioutil updating
the same.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
as ioutil.WriteFile is deprecated and
suggestion is to use os.WriteFile as
per https://pkg.go.dev/io/ioutil updating
the same.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Currently most of the internal methods have the
rbdVolume as the received. As these methods
are completely internal and requires only
the fields of the rbdImage use rbdImage
as the receiver instead of rbdVolume.
updates #2742
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
During CreateVolume from snapshot/volume,
its difficult to identify if the clone is
failed and a new clone is created. In case
of clone failure logging the error message
for better debugging.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
as per the CSI standard the size is optional parameter,
as we are allowing the clone to a bigger size
today we need to block the clone to a smaller size
as its a have side effects like data corruption etc.
Note:- Even though this check is present in kubernetes
sidecar as CSI is CO independent adding the check
here.
updates: #2718
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
as per the CSI standard the size is optional parameter,
as we are allowing the restore to a bigger size
today we need to block the restore to a smaller size
as its a have side effects like data corruption.
Note:- Even though this check is present in kubernetes
sidecar as CSI is CO independent adding the check
here.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Currently, as a workaround, we are calling
the resize volume on the cloned, restore volumes
to adjust the cloned, restored volumes.
With this fix, we are calling the resize volume
only if there is a size mismatch with requested
and the volume from which the new volume needs
to be created.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
