19 KiB
IPVS
This document intends to show users
- what is IPVS
- difference between IPVS and IPTABLES
- how to run kube-proxy in ipvs mode and info on debugging
What is IPVS
IPVS (IP Virtual Server) implements transport-layer load balancing, usually called Layer 4 LAN switching, as part of Linux kernel.
IPVS runs on a host and acts as a load balancer in front of a cluster of real servers. IPVS can direct requests for TCP and UDP-based services to the real servers, and make services of real servers appear as virtual services on a single IP address.
IPVS vs. IPTABLES
IPVS mode was introduced in Kubernetes v1.8, goes beta in v1.9 and GA in v1.11. IPTABLES mode was added in v1.1 and become the default operating mode since v1.2. Both IPVS and IPTABLES are based on netfilter.
Differences between IPVS mode and IPTABLES mode are as follows:
-
IPVS provides better scalability and performance for large clusters.
-
IPVS supports more sophisticated load balancing algorithms than iptables (least load, least connections, locality, weighted, etc.).
-
IPVS supports server health checking and connection retries, etc.
When ipvs falls back to iptables
IPVS proxier will employ iptables in doing packet filtering, SNAT or masquerade. Specifically, ipvs proxier will use ipset to store source or destination address of traffics that need DROP or do masquerade, to make sure the number of iptables rules be constant, no metter how many services we have.
Here is the table of ipset sets that ipvs proxier used.
| set name | members | usage |
|---|---|---|
| KUBE-CLUSTER-IP | All service IP + port | Mark-Masq for cases that masquerade-all=true or clusterCIDR specified |
| KUBE-LOOP-BACK | All service IP + port + IP | masquerade for solving hairpin purpose |
| KUBE-EXTERNAL-IP | service external IP + port | masquerade for packages to external IPs |
| KUBE-LOAD-BALANCER | load balancer ingress IP + port | masquerade for packages to load balancer type service |
| KUBE-LOAD-BALANCER-LOCAL | LB ingress IP + port with externalTrafficPolicy=local |
accept packages to load balancer with externalTrafficPolicy=local |
| KUBE-LOAD-BALANCER-FW | load balancer ingress IP + port with loadBalancerSourceRanges |
package filter for load balancer with loadBalancerSourceRanges specified |
| KUBE-LOAD-BALANCER-SOURCE-CIDR | load balancer ingress IP + port + source CIDR | package filter for load balancer with loadBalancerSourceRanges specified |
| KUBE-NODE-PORT-TCP | nodeport type service TCP port | masquerade for packets to nodePort(TCP) |
| KUBE-NODE-PORT-LOCAL-TCP | nodeport type service TCP port with externalTrafficPolicy=local |
accept packages to nodeport service with externalTrafficPolicy=local |
| KUBE-NODE-PORT-UDP | nodeport type service UDP port | masquerade for packets to nodePort(UDP) |
| KUBE-NODE-PORT-LOCAL-UDP | nodeport type service UDP port with externalTrafficPolicy=local |
accept packages to nodeport service with externalTrafficPolicy=local |
IPVS proxier will fall back on iptables in the following scenarios.
1. kube-proxy starts with --masquerade-all=true
If kube-proxy starts with --masquerade-all=true, ipvs proxier will masquerade all traffic accessing service Cluster IP, which behaves the same as what iptables proxier. Suppose kube-proxy have flag --masquerade-all=true specified, then the iptables installed by ipvs proxier should be like what is shown below.
# iptables -t nat -nL
Chain PREROUTING (policy ACCEPT)
target prot opt source destination
KUBE-SERVICES all -- 0.0.0.0/0 0.0.0.0/0 /* kubernetes service portals */
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
KUBE-SERVICES all -- 0.0.0.0/0 0.0.0.0/0 /* kubernetes service portals */
Chain POSTROUTING (policy ACCEPT)
target prot opt source destination
KUBE-POSTROUTING all -- 0.0.0.0/0 0.0.0.0/0 /* kubernetes postrouting rules */
Chain KUBE-MARK-MASQ (2 references)
target prot opt source destination
MARK all -- 0.0.0.0/0 0.0.0.0/0 MARK or 0x4000
Chain KUBE-POSTROUTING (1 references)
target prot opt source destination
MASQUERADE all -- 0.0.0.0/0 0.0.0.0/0 /* kubernetes service traffic requiring SNAT */ mark match 0x4000/0x4000
MASQUERADE all -- 0.0.0.0/0 0.0.0.0/0 match-set KUBE-LOOP-BACK dst,dst,src
Chain KUBE-SERVICES (2 references)
target prot opt source destination
KUBE-MARK-MASQ all -- 0.0.0.0/0 0.0.0.0/0 match-set KUBE-CLUSTER-IP dst,dst
ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 match-set KUBE-CLUSTER-IP dst,dst
2. Specify cluster CIDR in kube-proxy startup
If kube-proxy starts with --cluster-cidr=<cidr>, ipvs proxier will masquerade off-cluster traffic accessing service Cluster IP, which behaves the same as what iptables proxier. Suppose kube-proxy is provided with the cluster cidr 10.244.16.0/24, then the iptables installed by ipvs proxier should be like what is shown below.
# iptables -t nat -nL
Chain PREROUTING (policy ACCEPT)
target prot opt source destination
KUBE-SERVICES all -- 0.0.0.0/0 0.0.0.0/0 /* kubernetes service portals */
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
KUBE-SERVICES all -- 0.0.0.0/0 0.0.0.0/0 /* kubernetes service portals */
Chain POSTROUTING (policy ACCEPT)
target prot opt source destination
KUBE-POSTROUTING all -- 0.0.0.0/0 0.0.0.0/0 /* kubernetes postrouting rules */
Chain KUBE-MARK-MASQ (3 references)
target prot opt source destination
MARK all -- 0.0.0.0/0 0.0.0.0/0 MARK or 0x4000
Chain KUBE-POSTROUTING (1 references)
target prot opt source destination
MASQUERADE all -- 0.0.0.0/0 0.0.0.0/0 /* kubernetes service traffic requiring SNAT */ mark match 0x4000/0x4000
MASQUERADE all -- 0.0.0.0/0 0.0.0.0/0 match-set KUBE-LOOP-BACK dst,dst,src
Chain KUBE-SERVICES (2 references)
target prot opt source destination
KUBE-MARK-MASQ all -- !10.244.16.0/24 0.0.0.0/0 match-set KUBE-CLUSTER-IP dst,dst
ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 match-set KUBE-CLUSTER-IP dst,dst
3. Load Balancer type service
For loadBalancer type service, ipvs proxier will install iptables with match of ipset KUBE-LOAD-BALANCER.
Specially when service's LoadBalancerSourceRanges is specified or specified externalTrafficPolicy=local,
ipvs proxier will create ipset sets KUBE-LOAD-BALANCER-LOCAL/KUBE-LOAD-BALANCER-FW/KUBE-LOAD-BALANCER-SOURCE-CIDR
and install iptables accordingly, which should looks like what is shown below.
# iptables -t nat -nL
Chain PREROUTING (policy ACCEPT)
target prot opt source destination
KUBE-SERVICES all -- 0.0.0.0/0 0.0.0.0/0 /* kubernetes service portals */
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
KUBE-SERVICES all -- 0.0.0.0/0 0.0.0.0/0 /* kubernetes service portals */
Chain POSTROUTING (policy ACCEPT)
target prot opt source destination
KUBE-POSTROUTING all -- 0.0.0.0/0 0.0.0.0/0 /* kubernetes postrouting rules */
Chain KUBE-FIREWALL (1 references)
target prot opt source destination
RETURN all -- 0.0.0.0/0 0.0.0.0/0 match-set KUBE-LOAD-BALANCER-SOURCE-CIDR dst,dst,src
KUBE-MARK-DROP all -- 0.0.0.0/0 0.0.0.0/0
Chain KUBE-LOAD-BALANCER (1 references)
target prot opt source destination
KUBE-FIREWALL all -- 0.0.0.0/0 0.0.0.0/0 match-set KUBE-LOAD-BALANCER-FW dst,dst
RETURN all -- 0.0.0.0/0 0.0.0.0/0 match-set KUBE-LOAD-BALANCER-LOCAL dst,dst
KUBE-MARK-MASQ all -- 0.0.0.0/0 0.0.0.0/0
Chain KUBE-MARK-DROP (1 references)
target prot opt source destination
MARK all -- 0.0.0.0/0 0.0.0.0/0 MARK or 0x8000
Chain KUBE-MARK-MASQ (2 references)
target prot opt source destination
MARK all -- 0.0.0.0/0 0.0.0.0/0 MARK or 0x4000
Chain KUBE-POSTROUTING (1 references)
target prot opt source destination
MASQUERADE all -- 0.0.0.0/0 0.0.0.0/0 /* kubernetes service traffic requiring SNAT */ mark match 0x4000/0x4000
MASQUERADE all -- 0.0.0.0/0 0.0.0.0/0 match-set KUBE-LOOP-BACK dst,dst,src
Chain KUBE-SERVICES (2 references)
target prot opt source destination
KUBE-LOAD-BALANCER all -- 0.0.0.0/0 0.0.0.0/0 match-set KUBE-LOAD-BALANCER dst,dst
ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 match-set KUBE-LOAD-BALANCER dst,dst
4. NodePort type service
For NodePort type service, ipvs proxier will install iptables with match of ipset KUBE-NODE-PORT-TCP/KUBE-NODE-PORT-UDP.
When specified externalTrafficPolicy=local,ipvs proxier will create ipset sets KUBE-NODE-PORT-LOCAL-TC/KUBE-NODE-PORT-LOCAL-UDP
and install iptables accordingly, which should looks like what is shown below.
Suppose service with TCP type nodePort.
Chain PREROUTING (policy ACCEPT)
target prot opt source destination
KUBE-SERVICES all -- 0.0.0.0/0 0.0.0.0/0 /* kubernetes service portals */
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
KUBE-SERVICES all -- 0.0.0.0/0 0.0.0.0/0 /* kubernetes service portals */
Chain POSTROUTING (policy ACCEPT)
target prot opt source destination
KUBE-POSTROUTING all -- 0.0.0.0/0 0.0.0.0/0 /* kubernetes postrouting rules */
Chain KUBE-MARK-MASQ (2 references)
target prot opt source destination
MARK all -- 0.0.0.0/0 0.0.0.0/0 MARK or 0x4000
Chain KUBE-NODE-PORT (1 references)
target prot opt source destination
RETURN all -- 0.0.0.0/0 0.0.0.0/0 match-set KUBE-NODE-PORT-LOCAL-TCP dst
KUBE-MARK-MASQ all -- 0.0.0.0/0 0.0.0.0/0
Chain KUBE-POSTROUTING (1 references)
target prot opt source destination
MASQUERADE all -- 0.0.0.0/0 0.0.0.0/0 /* kubernetes service traffic requiring SNAT */ mark match 0x4000/0x4000
MASQUERADE all -- 0.0.0.0/0 0.0.0.0/0 match-set KUBE-LOOP-BACK dst,dst,src
Chain KUBE-SERVICES (2 references)
target prot opt source destination
KUBE-NODE-PORT all -- 0.0.0.0/0 0.0.0.0/0 match-set KUBE-NODE-PORT-TCP dst
5. Service with externalIPs specified
For service with externalIPs specified, ipvs proxier will install iptables with match of ipset KUBE-EXTERNAL-IP,
Suppose we have service with externalIPs specified, iptables rules should looks like what is shown below.
Chain PREROUTING (policy ACCEPT)
target prot opt source destination
KUBE-SERVICES all -- 0.0.0.0/0 0.0.0.0/0 /* kubernetes service portals */
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
KUBE-SERVICES all -- 0.0.0.0/0 0.0.0.0/0 /* kubernetes service portals */
Chain POSTROUTING (policy ACCEPT)
target prot opt source destination
KUBE-POSTROUTING all -- 0.0.0.0/0 0.0.0.0/0 /* kubernetes postrouting rules */
Chain KUBE-MARK-MASQ (2 references)
target prot opt source destination
MARK all -- 0.0.0.0/0 0.0.0.0/0 MARK or 0x4000
Chain KUBE-POSTROUTING (1 references)
target prot opt source destination
MASQUERADE all -- 0.0.0.0/0 0.0.0.0/0 /* kubernetes service traffic requiring SNAT */ mark match 0x4000/0x4000
MASQUERADE all -- 0.0.0.0/0 0.0.0.0/0 match-set KUBE-LOOP-BACK dst,dst,src
Chain KUBE-SERVICES (2 references)
target prot opt source destination
KUBE-MARK-MASQ all -- 0.0.0.0/0 0.0.0.0/0 match-set KUBE-EXTERNAL-IP dst,dst
ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 match-set KUBE-EXTERNAL-IP dst,dst PHYSDEV match ! --physdev-is-in ADDRTYPE match src-type !LOCAL
ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 match-set KUBE-EXTERNAL-IP dst,dst ADDRTYPE match dst-type LOCAL
Run kube-proxy in ipvs mode
Currently, local-up scripts, GCE scripts and kubeadm support switching IPVS proxy mode via exporting environment variables or specifying flags.
Prerequisite
Ensure IPVS required kernel modules (Notes: use nf_conntrack instead of nf_conntrack_ipv4 for Linux kernel 4.19 and later)
ip_vs
ip_vs_rr
ip_vs_wrr
ip_vs_sh
nf_conntrack_ipv4
- have been compiled into the node kernel. Use
grep -e ipvs -e nf_conntrack_ipv4 /lib/modules/$(uname -r)/modules.builtin
and get results like the followings if compiled into kernel.
kernel/net/ipv4/netfilter/nf_conntrack_ipv4.ko
kernel/net/netfilter/ipvs/ip_vs.ko
kernel/net/netfilter/ipvs/ip_vs_rr.ko
kernel/net/netfilter/ipvs/ip_vs_wrr.ko
kernel/net/netfilter/ipvs/ip_vs_lc.ko
kernel/net/netfilter/ipvs/ip_vs_wlc.ko
kernel/net/netfilter/ipvs/ip_vs_fo.ko
kernel/net/netfilter/ipvs/ip_vs_ovf.ko
kernel/net/netfilter/ipvs/ip_vs_lblc.ko
kernel/net/netfilter/ipvs/ip_vs_lblcr.ko
kernel/net/netfilter/ipvs/ip_vs_dh.ko
kernel/net/netfilter/ipvs/ip_vs_sh.ko
kernel/net/netfilter/ipvs/ip_vs_sed.ko
kernel/net/netfilter/ipvs/ip_vs_nq.ko
kernel/net/netfilter/ipvs/ip_vs_ftp.ko
OR
- have been loaded.
# load module <module_name>
modprobe -- ip_vs
modprobe -- ip_vs_rr
modprobe -- ip_vs_wrr
modprobe -- ip_vs_sh
modprobe -- nf_conntrack_ipv4
# to check loaded modules, use
lsmod | grep -e ipvs -e nf_conntrack_ipv4
# or
cut -f1 -d " " /proc/modules | grep -e ip_vs -e nf_conntrack_ipv4
Packages such as ipset should also be installed on the node before using IPVS mode.
Kube-proxy will fall back to IPTABLES mode if those requirements are not met.
Local UP Cluster
Kube-proxy will run in iptables mode by default in a local-up cluster.
To use IPVS mode, users should export the env KUBE_PROXY_MODE=ipvs to specify the ipvs mode before starting the cluster:
# before running `hack/local-up-cluster.sh`
export KUBE_PROXY_MODE=ipvs
GCE Cluster
Similar to local-up cluster, kube-proxy in clusters running on GCE run in iptables mode by default. Users need to export the env KUBE_PROXY_MODE=ipvs before starting a cluster:
#before running one of the commands chosen to start a cluster:
# curl -sS https://get.k8s.io | bash
# wget -q -O - https://get.k8s.io | bash
# cluster/kube-up.sh
export KUBE_PROXY_MODE=ipvs
Cluster Created by Kubeadm
If you are using kubeadm with a configuration file, you have to add mode: ipvs and also add SupportIPVSProxyMode: true below the kubeProxy field as part of the kubeadm configuration.
...
kubeProxy:
config:
featureGates:
SupportIPVSProxyMode: true
mode: ipvs
...
Note that in Kubernetes 1.11 and later, SupportIPVSProxyMode is set to true by default.
before running
kube init --config <path_to_configuration_file>
If you are using Kubernetes v1.8, you can also add the flag --feature-gates=SupportIPVSProxyMode=true (deprecated since v1.9) in kubeadm init command
kubeadm init --feature-gates=SupportIPVSProxyMode=true
to specify the ipvs mode before deploying the cluster.
Notes
If ipvs mode is successfully on, you should see ipvs proxy rules (use ipvsadm) like
# ipvsadm -ln
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
-> RemoteAddress:Port Forward Weight ActiveConn InActConn
TCP 10.0.0.1:443 rr persistent 10800
-> 192.168.0.1:6443 Masq 1 1 0
or similar logs occur in kube-proxy logs (for example, /tmp/kube-proxy.log for local-up cluster) when the local cluster is running:
Using ipvs Proxier.
While there is no ipvs proxy rules or the following logs ocuurs indicate that the kube-proxy fails to use ipvs mode:
Can't use ipvs proxier, trying iptables proxier
Using iptables Proxier.
See the following section for more details on debugging.
Debug
Check IPVS proxy rules
Users can use ipvsadm tool to check whether kube-proxy are maintaining IPVS rules correctly. For example, we have the following services in the cluster:
# kubectl get svc --all-namespaces
NAMESPACE NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE
default kubernetes ClusterIP 10.0.0.1 <none> 443/TCP 1d
kube-system kube-dns ClusterIP 10.0.0.10 <none> 53/UDP,53/TCP 1d
We may get IPVS proxy rules like:
# ipvsadm -ln
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
-> RemoteAddress:Port Forward Weight ActiveConn InActConn
TCP 10.0.0.1:443 rr persistent 10800
-> 192.168.0.1:6443 Masq 1 1 0
TCP 10.0.0.10:53 rr
-> 172.17.0.2:53 Masq 1 0 0
UDP 10.0.0.10:53 rr
-> 172.17.0.2:53 Masq 1 0 0
Why kube-proxy can't start IPVS mode
Use the following check list to help you solve the problems:
1. Enable IPVS feature gateway
For Kubernetes v1.10 and later, feature gate SupportIPVSProxyMode is set to true by default. However, you need to enable --feature-gates=SupportIPVSProxyMode=true explicitly for Kubernetes before v1.10.
2. Specify proxy-mode=ipvs
Check whether the kube-proxy mode has been set to ipvs.
3. Install required kernel modules and packages
Check whether the ipvs required kernel modules have been compiled into the kernel and packages installed. (see Prerequisite)